Directory Search Results

Print List

#240704029

Range of wall mounted, two-hole, single outlet, (fixed), combination tap assemblies, (brass bodies – various finishes), incorporating a ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum operating pressure 10 bar. Maximum operating temperature 60°C 13 623 180 rough-in set does not form as part of this approval.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240704029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
AXOR on face plate
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2029
Model:
38 112 xx0 38 113 xx0 38 115 xx0 38 116 xx0 39 112 xx0 39 113 xx0 39 114 xx0 39 115 xx0 39 116 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish Product to be installed in combination with 13623180

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2205367

Wall mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a sequential headwork controlling both flow and temperature using a single lever operating member. Inlets incorporate an isolation valve, stainless steel strainers and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. HTMWMRS is supplied with a removable spout. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2205367
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
SANCERAM ON OPERATING MEMBER
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2027
Model:
SCBW111 SCBW122

Approval Holder:
The Sanitaryware Company
Company Name
The Sanitaryware Company
Address
Montagu Court Kettering Venture Park Kettering Parkway
Postcode
NN15 6XR
Country
Kettering

View All Listings by this Company

Print This Approval


#240702006

Wall mounted, three-hole, single outlet (fixed) combination tap assemblies (brass body - various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240702006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Villeroy & Boch logo on spout
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2029
Model:
TVW126004000xx Where xx denotes the finish and can be replaced with any of the following: 61 = Chrome 74 = Brushed Chrome 63 = Graphite 64 = Brushed Nickel Matt 65 = Polished Nickel 60 = English Gold 76 = Brushed Gold 70 = Dune K5 = Matt Black

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#240702063

Range of Wall mounted, four-hole, single outlet (swivel) combination tap assemblies (Various Finishes). Incorporating a ceramic cartridge headwork controlling the flow to the shower handset and two quarter turn ceramic disc headworks controlling the flow to the spout outlet, all with single lever operating members. The spout outlets incorporate a plastic aerator. The inlet to the shower handsets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
240702063
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless Steel braided PEX lined flexible hose assemblies with ½” BSP captive nut end connecitons
Marking:
Vola logo on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2029
Model:
VOLA BK10 VOLA BK10A VOLA BK10B VOLA BK12 VOLA BK12A VOLA BK12B Model VOLA BK10, VOLA BK10A, VOLA BK10B, VOLA BK12, VOLA BK12A & VOLA BK12B Brass and Stainless Steel are available with different surface. finishes. Suffix in the end of the product name indicate the surface finish and denotes: For Brass: 02=Grey, 04=Light Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Polished Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 68=Nickel. For Stainless Steel: 40=Brushed Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold. Differences in the models: VOLA BK10, BK12 – Mixer with Adjustable Bracket and water collection box VOLA BK10A, BK12A – Mixer with Bracket VOLA BK12B, BK12B – Mixer Alone VOLA BK10, BK10A, BK10B – mixer with double swivel spout VOLA 090D-XX and mixer with hand shower VOLA BK12, BK12A, BK12B –mixer with swivel spout VOLA 090E-XX and mixer with hand shower

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval


#240704023

Range of combined bath filler, waste and overflow assemblies (in various finishes with a plastic body). The outlets incorporate plastic aerator. Maximum operating temperature 60°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
240704023
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M
Marking:
Hansgrohe on face plate.
Installation Requirements:
R001 R160 R576
Expiry date:
31/07/2029
Model:
58 123 xx0 58 125 180 58 126 180 58 127 xx0 58 128 xx0

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 267 of 493

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.