Directory Search Results

Print List

#2203331

Permanent filling/ pressurisation device for primary heating and chilled water closed circuits in domestic and non-domestic premises. The mains and closed circuit system pressures are continuously checked by two pressure sensors and their differential monitored by microprocessors. In the event of a fall in system pressure, and only if the mains pressure is adequate, a solenoid valve operates to allow water into the system. At all other times a second solenoid valve drains the fill chamber to waste, via tundish (meeting the requirements of an air gap to drain), and allowing air to be admitted via an automatic air vent to create an atmospheric disconnection across the transfer chamber. Maximum working pressure 6.0 Bar. Cold water use only.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2203331
Note:
Suitable for backflow protection up to fluid category 3. Consult your water supplier prior to installation
Size:
½” BSP (M)
Marking:
Flamco on front case.
Installation Requirements:
R001
Expiry date:
31/03/2027
Model:
Flexfiller Direct G4.
Product Images

Approval Holder:
Flamco Limited
Company Name
Flamco Limited
Address
Washway Lane, St. Helens
Postcode
WA10 6PB
Phone
+44 (0) 1744 744 744
General Email
info@flamco.co.uk

View All Listings by this Company
Manufacturer:
Flamco Limited
Company Name
Flamco Limited
Address
Washway Lane, St. Helens
Postcode
WA10 6PB
Phone
+44 (0) 1744 744 744
General Email
info@flamco.co.uk

View All Listings by this Company

Print This Approval


#2204042

Range of pressure transmitters with stainless steel bodies. Maximum working pressure 10.0 to 200.0 bar (please refer to model). Maximum operating temperature 100°C.

Section:
1530 Miscellaneous Fittings
Size:
1/2 in - 14 NPT female 1/2 in - 14 NPT male / 1/4 in - 18 NPT female DIN EN 837-1 G 1/2 B Front bonded G 1/2 in
Marking:
ABB, model, serial number & technical info on adhesive label on body.
Installation Requirements:
R001
Expiry date:
30/04/2027
Model:
PAS100.X.Y.GW/GA & PGS100.X.Y.GW/GA Where X denotes the pressure and can be replaced with any of the following sensor range (and max working pressure): C = 60 mbar (10.0 bar). F = 400 mbar (10.0 bar). L = 2500 mbar (30.0 bar). D = 10 bar (60.0 bar). K = 40 bar (80.0 bar). R = 100 bar (200.0 bar). Where Y denotes the connections and can be replaced with any of the following: A = 1/2 in - 14 NPT female B = 1/2 in - 14 NPT male / 1/4 in - 18 NPT female C = DIN EN 837-1 G 1/2 B P = Front bonded G 1/2 in
Product Images

Approval Holder:
ABB S.p.A
Company Name
ABB S.p.A
Address
Via Vaccani, 4 Tremezzina (loc. Ossuccio)
Postcode
22016
Country
Italy
General Email
matteo.gaffuri@it.abb.com

View All Listings by this Company
Manufacturer:
ABB S.p.A
Company Name
ABB S.p.A
Address
Via Vaccani, 4 Tremezzina (loc. Ossuccio)
Postcode
22016
Country
Italy
General Email
matteo.gaffuri@it.abb.com

View All Listings by this Company

Print This Approval


#2203307

Range of spout outlets with brass bodies (various finishes) incorporating an aerator. Product is supplied with either a lever type pop up (HIRONDELLE models) or click type waste (ICON-X & CORVAIR models). Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
2203307
Note:
No testing has been performed on the pop-up wastes
Size:
1 ¼” BSP (M) connector
Marking:
THG on spout
Installation Requirements:
R001 R006 R010
Expiry date:
31/03/2027
Model:
xxx.xxx.170/W – Rim mounted basin spout mixer with waste. First xxx: style . Second xxx: finish Styles HIRONDELLE: A4J Hirondelle cristal clair – A4K Hirondelle cristal clair décor platine - A4L Hirondelle cristal clair décor or ICON-X: U7G Icon-X / U7H Icon-X à manettes / U7J Icon-X, insert metal / U7K Icon-X à manettes, insert metal / U7L Icon-X, Titane / U7M Icon-X à manettes, Titane / U7N Icon-X, pierre à définir – U7P Icon-X à manettes, pierre à définir/ U7S - Icon-X , Carbone or / U7T Icon-X à manettes, Carbone or – CORVAIR: U8D Corvair / U8E Corvair à manettes / U8F Corvair marbre Howlite / U8G Corvair à manettes marbre Howlite / U8H Corvair marbre Portoro / U8J Corvair à manettes marbre Portoro / U8K Corvair marbre Fior di Bosco / U8L Corvair à manettes marbre Fior di Bosco / U8M Corvair pierre à définir / U8N Corvair à manettes pierre à définir Finish A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD H58 – Brushed stainless steel color PVD H59 – Stainless steel color PVD H60 – Matt blush PVD H62 – Blush PVD H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD
Product Images

Approval Holder:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company
Manufacturer:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company

Print This Approval


#2204046

Range of brass (chrome plated) quick fit connectors. Maximum operating temperature 60°C

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
2204046
Note:
Open outlet use only
Size:
See models
Marking:
Delabie on body.
Installation Requirements:
R001
Expiry date:
30/04/2027
Model:
820122N: M22 (F) 820123: ½” BSP (M) 820124N: M24 (M) 820125: M24 (M) 820126N: M16 (M) 821122: M22 (F) 821123: ½” BSP (M) 821124: M24 (M) 821125: M24 (M)
Product Images

Approval Holder:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company
Manufacturer:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

Print This Approval


#2203051

Range of multistage pumps with brass suction and discharge bodies, stainless steel housing, shaft and impeller, and EPDM ‘O’-rings and seals. Maximum working pressure: 6.0 bar (41491 & 41492 models) or 9.0 bar (41493 & 41494 models). Maximum operating temperature 65°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2203051
Size:
1¼” BSP (F) inlet x 1" BSP (F) outlet
Marking:
STUART TURNER, model number, maximum pressure and temperature and other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
31/03/2027
Model:
41491 - Multistage Pump 30, 41492 - Multistage Pump 40, 41493 - Multistage Pump 50, 41494 - Multistage Pump 60.
Product Images

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company
Manufacturer:
Fujian Fuan Wendy Electrical Machinery Co Ltd
Company Name
Fujian Fuan Wendy Electrical Machinery Co Ltd
Address
Qinxiyang Industrial Zone Fuan Fujian
Country
China
General Email

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 263 of 1240

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.