Directory Search Results

Fittings Materials
Print List

#2204022

Range of Caprice assisted baths which include a choice of with or without a hoist. Flow is controlled via a thermostatic mixing valve supplying the bath spout outlet or shower handset. The discharge from the bath spout and shower handset in via a type AUK 3 airgap, verified by measurement, suitable for Fluid Category 5 backflow protection Maximum working pressure 6.0 bar.

Non-metallic materials and components comply with BS6920 at 46°C

Section:
0055 Baths
Section Subtitle:
Assisted Bathing Units
WRAS Approval Number:
2204022
Note:
The inlets to the thermostatic mixing valve incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection, therefore IRN 010 applies.
Size:
Stainless steel braided EPDM lined flexible hose assemblies with 22mm push-fit end connections.
Marking:
Reval, model number, product info on label of leg. Reval on front panel.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2027
Model:
Caprice fixed height bath without hoist 7100.0GS70R – Caprice fixed height bath L/H model 172cm length 7100.0DS70R – Caprice fixed height bath R/H model 172cm length 7100.0GS90R – Caprice fixed height bath L/H model 192cm length 7100.0DS90R – Caprice fixed height bath R/H model 192cm length Caprice variable height bath without hoist 7100.1GS70R – Caprice variable height bath L/H model 172cm length 7100.1DS70R – Caprice variable height bath R/H model 172cm length 7100.1GS90R – Caprice variable height bath L/H model 192cm length 7100.1DS90R – Caprice variable height bath R/H model 192cm length Caprice variable height bath with hoist 7100.1GS71R – Caprice variable height bath with hoist L/H model 172cm length 7100.1DS71R – Caprice variable height bath with hoist R/H model 172cm length 7100.1GS91R – Caprice variable height bath with hoist L/H model 192cm length 7100.1DS91R 0 Caprice variable height bath with hoist R/H model 192cm length
Product Images
Approval Holder:
Reval Continuing Care Limited
Company Name
Reval Continuing Care Limited
Address
Unit 17 St Theodore’s Way Brynmenyn Business Centre Bridgend
Postcode
CF32 9TZ
Country
United Kingdom
Phone
01656 721001
General Email
lynette@revalcc.com

View All Listings by this Company
Manufacturer:
Reval Continuing Care Limited
Company Name
Reval Continuing Care Limited
Address
Unit 17 St Theodore’s Way Brynmenyn Business Centre Bridgend
Postcode
CF32 9TZ
Country
United Kingdom
Phone
01656 721001
General Email
lynette@revalcc.com

View All Listings by this Company

Print This Approval

#2111010

Quarter turn ceramic disc headwork incorporating a plastic body to be housed in specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
2111010
Size:
½” BSP (M)
Marking:
Sedal on body
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
19MCP plastics headwork
Product Images
Approval Holder:
Kaiping Sedal Tap Components Co., Ltd.
Company Name
Kaiping Sedal Tap Components Co., Ltd.
Address
Floor 1, 3 and Part of Floor 2, No. 2 Neihuan Dong Road, Shuikou Town, Kaiping City, Guangdong Province
Country
China
Phone
+86-750-2728599
General Email
tony@ksedal.com

View All Listings by this Company
Manufacturer:
Kaiping Sedal Tap Components Co., Ltd.
Company Name
Kaiping Sedal Tap Components Co., Ltd.
Address
Floor 1, 3 and Part of Floor 2, No. 2 Neihuan Dong Road, Shuikou Town, Kaiping City, Guangdong Province
Country
China
Phone
+86-750-2728599
General Email
tony@ksedal.com

View All Listings by this Company

Print This Approval

#2111802

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Products are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2111802
Note:
No testing performed on pop-up waste.
Size:
15mm copper tails
Marking:
Palazzani on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2026
Model:
Art. 003010 Manhattan range: - Manhattan 23311710 long lever. - Manhattan 23311910 long lever. Art. 003010 Proxima range: - Proxima 40311710 long lever. - Proxima 40311910 long lever.
Approval Holder:
Palazzani.eu Srl
Company Name
Palazzani.eu Srl
Address
Via Mario Anelli 75/77, Casalmorano 26020 (Cr)
Country
Italy
Phone
0374/74141
General Email
tecnico@palazzani.eu

View All Listings by this Company
Manufacturer:
Palazzani.eu Srl
Company Name
Palazzani.eu Srl
Address
Via Mario Anelli 75/77, Casalmorano 26020 (Cr)
Country
Italy
Phone
0374/74141
General Email
tecnico@palazzani.eu

View All Listings by this Company

Print This Approval

#2110027

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Some products are supplied with a pop-up waste or a click type waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2110027
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2026
Model:
Hansgrohe Talis S Single lever basin mixer 80 range: 72 010 xxx with pop-up waste set, 72 011 xxx with push-open (click type) waste set, 72 012 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 80 CoolStart range: 72 013 xxx with pop-up waste set, 72 014 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 80 LowFlow range: 72 015 xxx with pop-up waste set, 72 018 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 range: 72 020 xxx with pop-up waste set, 72 021 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 CoolStart range: 72 022 xxx with pop up waste set, 72 023 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 LowFlow 72 024 xxx with pop up waste set, 72 025 xxx without pop-up waste. Hansgrohe Talis S Single lever basin mixer 190 range: 72 031 xxx with pop-up waste, 72 032 xxx without waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval

#2110072

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The 36 100 xxx model is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2110072
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜" captive nut end connections
Marking:
AXOR (brand of Hansgrohe SE) on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2026
Model:
36 100 xxx AXOR Citterio E Single lever basin mixer 130 with pop-up waste set. 36 101 xxx AXOR Citterio E Single lever basin mixer 130 with waste set. 36 102 xxx AXOR Citterio E Single lever basin mixer 90 for hand washbasins with waste set. 36 103 xxx AXOR Citterio E Single lever basin mixer 190 for wash bowls with waste set. 36 104 xxx AXOR Citterio E Single lever basin mixer 250 for wash bowls with waste set. 36 105 xxx AXOR Citterio E Pillar tap 90 without waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 27 of 178

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.