Directory Search Results

Print List

#2202516

‘NGP 60 T (Translucent – off-white), NGP 60 T/R (Transy Red), NGP 60 BK (Black), NGP 60 GY (Grey) & NGP 60 W (White)’. Extruded, platinum cured, silicone rubber tubing. Shore hardness 60. Tested in-radii sizes between 0.75mm & 1.5mm. For use with water up to 85°C

Section:
5410 Rubbers
Section Subtitle:
Silicone - components.
WRAS Approval Number:
2202516
Expiry date:
28/02/2027

Approval Holder:
Silex Ltd.
Company Name
Silex Ltd.
Address
Unit 4 & 5 Broxhead Industrial Estate Lindford Bordon
Postcode
GU53 0NY
Phone
+44 (0) 1420 487130 / 488042
General Email
info@silex.co.uk

View All Listings by this Company

Print This Approval


#2202517

'Tangit PVC-U Plus'. Light yellow (straw) coloured, solvent cement. Apply as per manufacturer's TDS 'Tangit PVC-U PLUS TDS 070917 EN'. Cure for 24 hours@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
28/02/2027

Approval Holder:
Henkel AG & Co. KGaA
Company Name
Henkel AG & Co. KGaA
Address
40191 Dusseldorf
Country
Germany

View All Listings by this Company

Print This Approval


#2112324

Bidet seat assembly with the flow controlled by a sensor actuated solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 1.75 bar. Maximum operating temperature 45°C.

Section:
0278 Bidets and associated fittings
Size:
3/8” or ½” BSP (M)
Marking:
Washbot on seat cover
Installation Requirements:
R001 R009
Expiry date:
31/12/2026
Model:
WB8001 Wall Hung Smart Toilet; WB8001A Wall Hung Smart Toilet with automated opening; WB8002 Wall Hung Smart Toilet; WB8002A Wall Hung Smart Toilet with automated opening; WB8003 Wall Hung Smart Toilet; WB8003A Wall Hung Smart Toilet with automated opening; WB8004 Wall Hung Smart Toilet; WB8004A Wall Hung Smart Toilet with automated opening;

Approval Holder:
Washbot Ltd
Company Name
Washbot Ltd
Address
Northgate Business Centre 38 Northgate Newark-on-Trent Nottinghamshire
Postcode
NG24 1EZ
Country
United Kingdom
Phone
01636 314042
General Email
andy@thewashbot.co.uk

View All Listings by this Company

Print This Approval


#2109063

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109063
Size:
15mm Compression
Marking:
Noken Porcelanosa, model and flushing volumes inside of cistern. Noken on operating buttons.
Installation Requirements:
R001 R556
Expiry date:
30/09/2026
Model:
100294206 & 100294199 WC CISTERN

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval


#2106050

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106050
Size:
1/2” BSP (M).
Marking:
NOKEN & SMARTLINE ON FRONT OF CISTERN NOKEN, MODEL & FLUSH VOLUME ON INSIDE OF CISTERN
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
100294223 3-4.5 Ltr. 100294207 3-4.5 Ltr. 100294230 3-6Ltr. 100294216 3-6Ltr.

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 256 of 2085

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.