'Hydradry Tanking slurry'. Site applied, grey coloured, cementitious tanking slurry supplied in powder form. Mix powder:water in a mass ratio of 3.85:1 and apply as per manufacturer's datasheet 'issue 5 - MC0320'. Cure for 7 days and 4 hours@20°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5046 Coatings, Paints & Linings

Section Subtitle:

Site applied cistern coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2201519

Expiry date:

31/01/2027

Approval Holder:

Wykamol Group Limited

Company Name

Wykamol Group Limited

Address

Unit 3 Boran Court, Network 65 Business Park, Hapton

Postcode

BB11 5TH

Country

Burnley,

View All Listings by this Company

'Extrastrong SMC/ESF-30-10' pipe. Natural (appears pale green coloured) GRE pipe manufactured by filament winding. For use with water up to 70°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

2203507

Expiry date:

31/03/2027

Approval Holder:

Advanced Composites

Company Name

Advanced Composites

Address

PO Box No 41632 Hamriya Freezone Sharjah

Country

U.A.E

Phone

+971 6 526 3113

General Email

procurement@acomposites.com

View All Listings by this Company

'S350 Silicone Fluid'. Colourless (transparent) silicone lubricant. Apply as per manufacturer's instructions for use 'LDAP-009', issue 1 dated May 2021. For use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

31/08/2027

Approval Holder:

Superior Seals Ltd.

Company Name

Superior Seals Ltd.

Address

Nimrod Way, Ferndown Industrial Estate, Ferndown, Dorset

Postcode

BH21 7SH

Country

UK

Phone

01202 854 300

General Email

sales@superiorltd.com

View All Listings by this Company

'SG100'. Off-white coloured (opaque) silicone grease. Apply as per manufacturer's instructions. For use with water up to 65°C.

Section:

5160 Lubricants

Expiry date:

28/02/2026

Approval Holder:

Polypipe Limited (Trading as Polypipe Building Products)

Company Name

Polypipe Limited (Trading as Polypipe Building Products)

Address

Broomhouse Lane, Edlington, Doncaster

Postcode

DN12 1ES

Country

South Yorkshire

Phone

+44 (0) 1709 770000 Fax: 01709 770001

General Email

marketing@polypipe.com

View All Listings by this Company

'SIL500'. Off-white coloured (opaque) silicone grease. Apply as per manufacturer's instructions. For use with water up to 65°C.

Section:

5160 Lubricants

Expiry date:

28/02/2026

Approval Holder:

Polypipe Limited (Trading as Polypipe Building Products)

Company Name

Polypipe Limited (Trading as Polypipe Building Products)

Address

Broomhouse Lane, Edlington, Doncaster

Postcode

DN12 1ES

Country

South Yorkshire

Phone

+44 (0) 1709 770000 Fax: 01709 770001

General Email

marketing@polypipe.com

View All Listings by this Company

`Unisilkon M2000`. Clear, colourless silicone lubricant aerosol. For use with water up to 23°C.

Section:

5160 Lubricants

Expiry date:

28/02/2027

Approval Holder:

Klüber Lubrication München GmbH & Co. KG

Company Name

Klüber Lubrication München GmbH & Co. KG

Address

Geisenhausenerstrasse 7, 81379 München

Country

Germany

View All Listings by this Company

'Rilsan BZM 30 O TLD A'. Beige coloured, injection moulded, glass fibre reinforced nylon material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2103564

Expiry date:

31/03/2026

Approval Holder:

Arkema France

Company Name

Arkema France

Address

CERDATO, Route du Launay, 27470 Serquigny

Country

France

View All Listings by this Company

'Zytel® RSFG30G50L BK595'. Black coloured, injection moulded glass fibre reinforced nylon (polyamide 610) material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2202511

Expiry date:

28/02/2027

Approval Holder:

Celanese Sales Germany GmbH

Company Name

Celanese Sales Germany GmbH

Address

Am Unisys Park 1, 65843 Sulzbach am Taunus

Country

Germany

View All Listings by this Company

'Zytel® FG70G30HSR3 BK309'. Black coloured, injection moulded nylon material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2203506

Expiry date:

31/03/2027

Approval Holder:

Celanese Sales Germany GmbH

Company Name

Celanese Sales Germany GmbH

Address

Am Unisys Park 1, 65843 Sulzbach am Taunus

Country

Germany

View All Listings by this Company

`Grilamid TR 90 LS Natural & Grilamid TR 90 Natural`. Natural (colourless, transparent), injection moulded nylon materials. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2201529

Expiry date:

31/01/2027

Approval Holder:

EMS-CHEMIE AG

Company Name

EMS-CHEMIE AG

Address

Via Innovativa 1, CH-7013 Domat/Ems

Country

Switzerland

Phone

+41 81 632 78 78

General Email

welcome@emsgrivory.com

View All Listings by this Company