Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2201355

Range of double regulating valves incorporating bronze bodies, brass disc face (½” - ¾” models) or PTFE (1” - 2” models), PTFE plate and NBR ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 2201355
Size:: ½” BSP (F) - 2” BSP (F)
Marking:: Blazetech BT logo, PN, flow arrow and size on body.
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: BT 1314 range

Approval Holder:: Blazetech Systems Ltd.

Company Name
Blazetech Systems Ltd.
Address
Integer Millennium House, Bucknalls Lane, Watford
Postcode
WD25 9XX
Country
United Kingdom
General Email
info@blaze-tech.com

View All Listings by this Company

WRAS Approval Number: #2201116

BT1420-DFM Range of regulating valves with blue epoxy coated ductile iron bodies incorporating EPDM gaskets and hand wheel operating member. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 2201116
Size:: DN65 - DN300 flanged inlet and outlet connections
Marking:: BLAZE, model, PN, WRAS and other technical information on name plate on body. DN, PN, and flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: BT1420-DFM series

Approval Holder:: Blazetech Systems Ltd.

Company Name
Blazetech Systems Ltd.
Address
Integer Millennium House, Bucknalls Lane, Watford
Postcode
WD25 9XX
Country
United Kingdom
General Email
info@blaze-tech.com

View All Listings by this Company

WRAS Approval Number: #250402712

Range of commercial dish washing machines. Flow is controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure: 4.0 Bar. Maximum operating temperature: 60°C.

Section:: 2390 Washing Machines
Section Subtitle:: Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:: 250402712
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: PVC bodied appliance hose with an EPDM inner liner incorporating a ¾” BSP (F) captive nut end connection.
Marking:: DC Products logo on control panel. DC Products logo, model name and other technical information on adhesive label on side of body.
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: ED50A, ED900A, SD40A, SXD40A, SD45A, SD50A, SXD45A, SXD50A, PG/PD40A, PG/PD45A, PG/PD50A, OG/OD40A, OG/OD50A, X600A, X700A, W700A, W1100, W1400A, W1400SA, SD900A, SD1000A, SD1300A, SD1350A, PD1000A, PD1300A, PD1350A, OD1400A, OD1425A, OD1450A, DC57-42A, DC57-62A, DC67A, DC109A. Key: SD = Standard series dish, SXD = Standard extra dish, ED = ECONOMY SERIES DISH, PG/PD = Premium series glass/Premium range dish, OG/OD = Optima series glass/dish W or X = washrite range. DC = Direct Catering Range (the numbers for the DC range also represent basket size). The number 40, 45 and 50 numbers relate to the basket size. The numbers 600, 700, 900, 1000, 1100, 1350, 1400 are arbitrary number or once related to the pump sizes. Any model that has the letter ‘A’ immediately after the model number signifies that the break tank has been fitted. Additional suffixes of varying character may be present after the letter ‘A’, e.g. ‘PD50A D’ List of available suffixes: BPI – boost pump CP – chemical pumps D – Drain pump DL – lock DP – detergent pump DR – Dryer HR – recovery IS – Softener LT – Light RDP – rinse and detergent pumps RP – rinse pump SW – Saniwash TD – thermos Disinfection UV – UV light. All the above models have the same pathway.

Approval Holder:: DC Products Ltd

Company Name
DC Products Ltd
Address
Unit 25 lodge hill Industrial Park Westbury Sub Mendip Somerset
Postcode
BA5 1EY

View All Listings by this Company

WRAS Approval Number: #250608702

Range of water conditioners with stainless steel bodies. AFL012 MFB has a matt black finish and AFL012MFC has a chrome plate finish. Models with compression connections are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C.

Section:: 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Activflo, model and PN on adhesive label.
Installation Requirements:: R001 R120 R150 R170
Expiry date:: 30/06/2030
Model:: AFL010 - Activflo Lite Water Conditioner - 1” BSP Male, AFL012 - Activflo Lite Water Conditioner - ½” BSP Male, AFL012MFB - Activflo Solo Lite - 1/2" MBSP X 1/2 FBSP, AFL012MFC - Activflo Solo Lite - 1/2" MBSP X 1/2" FBSP, AFL034 - Activflo Lite Water Conditioner- 3/4” BSP Male, AFL0112 - ACTIVFLO LITE - 1 1/2" X 1 1/2" MBSP, AFL0114 - ACTIVFLO LITE - 1 1/4" X 1 1/4" MBSP, AFL015 - Activflo Lite Water conditioner - 15mm x 15mm compression, AFL022 - Activflo Lite Water conditioner - 22mm x 22mm compression, AFL028 - Activflo Lite Water conditioner - 28mm x 28mm compression.

Approval Holder:: Intatec Limited

Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

WRAS Approval Number: #250712702

Range of scale inhibitors with chrome plated copper bodies for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Cold water use only.

Section:: 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 14.7mm, 15mm, 21mm & 22mm compression
Marking:: Manufacturer’s logo and size on body
Installation Requirements:: R001 R120 R150 R170 R290
Expiry date:: 31/07/2030
Model:: G2250-015, G2250-022, G2250-147 & G2250-021

Approval Holder:: Zhejiang Fansheng Fluid Control Co., Ltd.

Company Name
Zhejiang Fansheng Fluid Control Co., Ltd.
Postcode
317605
Country
China
Phone
+86 576 8746 0061
General Email
info@IVANCI.com

View All Listings by this Company