Range of stainless steel (SS304 or SS316L) press-fit fittings incorporating EPDM ‘O’-rings for use with *‐KJ600304 and *-KJ600316 stainless steel pipes. The "KJ6278" prefix models also incorporates an EPDM gasket on the union nut. Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250615017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15 - 108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).

Marking:

KONJOY, size, WRAS and material grade on fitting body. WRAS, KONJOY, size, material grade, EN10312 and date of manufacture (YYYY/MM) on pipe.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Adapter 90 with female thread: KJ625015005: 15×Rp½. KJ625018005: 18×Rp½. KJ625022075: 22×Rp¾. Adapter with female thread: KJ627115005: 15×Rp½. KJ627118005: 18×Rp½. KJ627122075: 22×Rp¾. KJ627128001: 28×Rp1. KJ627135125: 35×Rp1¼. KJ627142105: 42×Rp1½. KJ627154002: 54×Rp2. Bridge with plain ending: KJ608500018: 18. KJ608500022: 22. KJ608500028: 28. Cap: KJ621100015: 15. KJ621100018: 18. KJ621100022: 22. KJ621100028: 28. KJ621100035: 35. KJ621100042: 42. KJ621100054: 54. KJ621100076: 76.1. KJ621100089: 88.9. KJ621100108: 108. Elbow 45 with press ending: KJ604500015: 15. KJ604500018: 18. KJ604500015: 22. KJ604500028: 28. KJ604500035: 35. KJ604500042: 42. KJ604500054: 54. KJ604500076: 76.1. KJ604500089: 88.9. KJ604500108: 108. Elbow 45 with plain ending: KJ614500015: 15. KJ614500018: 18. KJ614500022: 22. KJ614500028: 28. KJ614500035: 35. KJ614500042: 4 KJ614500054: 54. KJ614500076: 76.1. KJ614500089: 88.9. KJ614500108 -108. Elbow 90 with press ending KJ609600015: 15. KJ609600018: 18. KJ609600022: 22. KJ609600028: 28. KJ609600035: 35. KJ609600042: 42. KJ609600054: 54. KJ609600067: 66.7. KJ609600076: 76.1. KJ609600089: 88.9. KJ609600108 -108. Elbow 90 with female thread: KJ623015005: 15×Rp½. KJ623018005: 18×Rp½. KJ623022075: 22×Rp¾. KJ623028001: 28×Rp1. KJ623035125 : 35×Rp1¼. KJ623042105: 42×Rp1½. KJ623054002: 54×Rp2. Elbow: 90 with: male thread: KJ624015005: 15×R½. KJ624018005: 18×R½. KJ624022075: 22×R¾ Elbow 90 with plain ending: KJ619100015: 15. KJ619100018: 18. KJ619100022: 22. KJ619100028: 28. KJ619100035: 35. KJ619100042: 42. KJ619100054: 54. KJ619100076: 76.1. KJ619100089: 88.9. KJ619100108: 108. Reducer coupling with plain ending: KJ624301815: 18×15. KJ624302218: 22×18. KJ624302818: 28×18. KJ624303522: 35×22. KJ624303528: 35×28. KJ624304222: 42×22. KJ624304228: 42×28. KJ624304235: 42×35. KJ624305428: 54×28. KJ624305435: 54×35. KJ624305442: 54×42. Reducer coupling with press ending: KJ624401815: 18×15. KJ624402215: 22×15. KJ624402218: 22×18. KJ624402815: 28×15. KJ624402818: 28×18. KJ624402822: 28×22. KJ624403515: 35×15. KJ624403518: 35×18. KJ624403522: 35×22. KJ624403528: 35×28. KJ624404215: 42×15. KJ624404218: 42×18. KJ624404222: 42×22. KJ624404228: 42×28. KJ624404235: 42×35. KJ624405415: 54×15. KJ624405418: 54×18. KJ624405422: 54×22. KJ624405428: 54×28. KJ624405435: 54×35. KJ624405442: 54×42. KJ624406735: 66.7×35. KJ624406754: 66.7×54. KJ624407654: 76.1×54. KJ624408954: 88.9×54. KJ624408976: 88.9×76.1. KJ624410854: 108×54. KJ624410876: 108×76.1. KJ624410889: 108×88.9. Reducer Tee with press ending: KJ613301815: 18×15×18. KJ613302215: 22×15×22. KJ613302218: 22×18×22. KJ613302815: 28×15×28. KJ613302818: 28×18×28. KJ613302822: 28×22×28. KJ613303522: 35×22×35. KJ613303528: 35×28×35. KJ613304222: 42×22×42. KJ613304228: 42×28×42. KJ613304235: 42×35×42. KJ613305422: 54×22×54. KJ613305428: 54×28×54. KJ613305435: 54×35×54. KJ613305442: 54×42×54. KJ613307642: 76.1×42×76.1. KJ613307654: 76.1×54×76.1. KJ613308954: 88.9×54×88.9 KJ613310854: 108×54×108. KJ613310876: 108×76.1×108. KJ613310889: 108×88.9×108 Equal coupling with press ending: KJ623700015: 15. KJ623700018: 18. KJ623700022: 22 KJ623700028: 28. KJ623700035: 35. KJ623700042: 42. KJ623700054: 54. KJ623700067: 66.7. KJ623700076: 76.1. KJ623700089: 88.9. KJ623700108: 108 Adapter with male thread: KJ627215005: 15×R½. KJ627218005: 18×R½. KJ627218075: 18×R¾. KJ627222005: 22×R½. KJ627222075: 22×R¾. KJ627228001: 28×R1. KJ627235125: 35×R1¼. KJ627242105: 42×R1½. KJ627254002: 54×R2. KJ627276205: 76.1×R2½. KJ627289003: 88.9×R3. Slip coupling with press ending: KJ627100015: 15. KJ627100018: 18. KJ627100022: 22. KJ627100028: 28. KJ627100035: 35. KJ627100042: 42 KJ627100054: 54. Tee with press ending: KJ613012015: 15. KJ613012018: 18. KJ613012022: 22. KJ613012028: 28. KJ613012035: 35. KJ613012042: 42. KJ613012054: 54. KJ613012076: 76.1. KJ613012089: 88.9. KJ613012108: 108. Tee with male thread: KJ613815005: 15×R½. KJ613818005: 18×R½. KJ613822005: 22×R½. KJ613822075: 22×R¾. KJ613828005: 28×R½. KJ613828075: 28×R¾. KJ613828001: 28×R1. KJ613835105: 35×R½. KJ613835125: 35×R1¼. KJ613842125: 42×R1¼. KJ613854105: 54×R1½. KJ613854002: 54×R2. Tee with female thread:: KJ613915005: 15×Rp½. KJ613918005: 18×Rp½. KJ613922005: 22×Rp½. KJ613922075: 22×Rp¾. KJ613928005: 28×R½. KJ613928075: 28×Rp¾. KJ613928001: 28×Rp1. KJ613935005: 35×Rp½. KJ613935125: 35×Rp1¼. KJ613942125: 42×Rp1¼. KJ613954105: 54×1½. KJ613954002: 54×Rp2. Adaptor with union nut: KJ627815005: 15×G½. KJ627818005: 18×G½. KJ627818075: 18×G¾. KJ627822005: 22×G½. KJ627822075: 22×G¾. KJ627822001: 22×G1. KJ627828001: 28×G1. KJ627835125: 35×G1¼. KJ627842175: 42×G1¾. KJ627854002: 54×G2. Stainless steel pipe (SS304 or SS316L): *‐KJ600304 (SS304) *-KJ600316 (SS316L) Where * = size in mm between 15 and 108 (in whole numbers: 15, 18, 22, 28, 35, 42, 54, 66.7, 76.1, 88.9, 108).

Product Images

Approval Holder:

Wenzhou Konjoy Fluid Control Tech Co., Ltd.

Company Name

Wenzhou Konjoy Fluid Control Tech Co., Ltd.

Address

1st Floor, No. 222, Binhai Industrial Zone, 2nd Road, Xinghai Sub‐district, Longwan District, Wenzhou, Zhejiang

Country

China

Phone

0086‐577‐86896059

General Email

info@konjoy‐tech.com

View All Listings by this Company

Uponor S-Press press fittings, Uni-X & Uni-C compression fittings for use with Uponor MLC pipe. Maximum working pressure 10.0 bar, maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251188701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

14mm

Marking:

Manufacturers name or trademark “U” and size on fitting. Uponor and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

1058085 Uponor Uni-C compression adapter MLC 1013894 UPONOR UNI‐C COUPLING PLATED MLC 1014513 UPONOR S‐PRESS ADAPTER MALE THREAD 1014515 UPONOR S‐PRESS ADAPTER FEMALE THREAD 1014886 UPONOR S‐PRESS TEE 1015154 UPONOR S‐PRESS COUPLING 1015437 Uponor S-Press tap elbow 1133445 Uponor S-Press elbow 1133446 Uponor S-Press tap elbow twin 90deg long 1014654 Uponor SMART AQUA ELBOW ADAPTER S‐PRESS 1014511 UPONOR S‐PRESS ADAPTER 1013366 Uponor Uni Pipe PLUS white 1013577 Uponor Uni Pipe PLUS white insulated 1013678 Uponor Uni Pipe PLUS white in conduit 1160885 Uponor Uni Pipe PLUS white insulated

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Manufacturer:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

‘Numepress’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings for use with 'Numepress' stainless steel pipe. Connection is achieved via M profile press jaws. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251202006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139 and 168mm crimp. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F – stated via model name). DN50 to DN150 Flanged.

Marking:

ISOTUBI SL LOGO, Numepress and size on fitting body. ISOTUBI, Numepress, size and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

F01 Coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F02 Slip Coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F03 90Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F04 90Q Male - Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F05 45Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F06 45Q Female - Male Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F07 Female Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F08 Male Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F09 Female Elbow with Wall nut from 15 1/2" to 22 3/4" Material 1.4401/1.4404 & 1.4301/1.4307 F10 90Q Elbow with Plane Ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F11 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" Material 1.4401/1.4404 & 1.4301/1.4307 F12 Female tee threaded adaptor from 15 1/2" to 108 2" Material 1.4401/1.4404 & 1.4301/1.4307 F14 Reducer from 18-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 F15 Reducing tee from 18-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 F16 Equal Tee from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F17 Female adaptor from 15 3/ 8" to 88.9 3" Material 1.4401/1.4404 & 1.4301/1.4307 F18 M ale adaptor from 15 3/8" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 F19 Flanges adaptor from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 F20 Pre-formed pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F21 Plug from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F22 Air tuve Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F23 Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F24 3 Pieces adaptor from 15 to 60.3 Material 1.4401/1.4404 & 1.4301/1.4307 F25 Female -Female pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F26 Female connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F27 Male connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F28 Press flanged adaptor from 54 DN50 to 168.3 DN150 Material 1.4401/1.4404 & 1.4301/1.4307 F30 Cross or reduced cross from 15-15-15-15 to 168.3-168.3-168.3-168 .3 Material 1.4401/1.4404 & 1.4301/1.4307 F33 45Q Male angle adaptor from 15 1/ 2" to 28 1" Material 1.4401/1.4404 & 1.4301/1.4307 F34 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" Material 1.4401/1.4404 & 1.4301/1.4307 F35 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F36 Male Tee threaded adaptor from 15 3/8" to 35 11/4" Material 1.4401/1.4404 & 1.4301/1.4307 F37 Male threaded cross from 15 1/2" to 108-4" Material 1.4401/1.4404 & 1.4301/1.4307 F38 Female threaded cross from 15 1/ 2" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 F39 90Q Male angle adaptor from 15 3/8" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F41 Male union connector gas from 15 1/ 2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F42 Female Union connector gas from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F43 Grooved Transition from 3/4" to 2" Material 1.4401/1.4404 & 1.4301/1.4307 F44 Van Stone flange from 1/2" to 2" Material 1.4401/1.4404 & 1.4301/1.4307 F45 Union Gas Female threaded from 15 3/4" to 54 2"Material 1.4401/1.4404 & 1.4301/1.4307 F46 Straight union with press fitting on both ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F47 Half coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F48 30Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F49 30Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F50 15Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F51 60Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F52 Flanges adaptor PN6 from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 F53 Pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F54 Male plug from 16 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F55 Weld Adaptor from 15 to 60.3 Material 1.4401/1.4404 & 1.4301/1.4307 F56 75Q Female -Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F57 l0Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F58 60Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F59 lSQ Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F60 Slip coupling with female thread from DN15 1/ 2" to DN54 Material 1.4401/1.4404 & 1.4301/1.4307 F61 Transition for grooved coupling from DN28x33.7 to DN108x 11 4.3 Material 1.4401/1.4404 & 1.4301/1.4307 F63 7SQ Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F64 15Q Male -female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F65 Male-Female pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F66 30Q Male-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F72 45Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 Pipe 15 x 0.6 mm Material 1.4401/1.4404 Pipe 18 x 0.7 mm Material 1.4401/1.4404 Pipe 22 x 0.7 mm Material 1.4401/1.4404 Pipe 28 x 0.8 mm Material 1.4401/1.4404 Pipe 35 x 1 mm Material 1.4401/1.4404 Pipe 42 x 1.1 mm Material 1.4401/1.4404 Pipe 54 x 1.2 mm Material 1.4401/1.4404 Pipe 76.1 x 1.5 mm Material 1.4 401/ 1.4404 Pipe 15 x 1 mm Material 1.4401/1.4404 Pipe 18 x 1 mm Material 1.4401/1.4404 Pipe 22 x 1.2 mm Material 1.4401/1.4404 Pipe 28 x 1.2 mm Material 1.4401/1.4404 Pipe 35 x 1.5 mm Material 1.4401/1.4404 Pipe 42 x 1.5 mm Material 1.4401/1.4404 Pipe 54 x 1.5 mm Material 1.4401/1.4404 Pipe 76.1 x 2 mm Material 1.4401/1.4404 Pipe 88.9 x 2 mm Material 1.4401/1.4404 Pipe 114.3 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2.6 mm Material 1.4401/1.4404 Pipe 168.3 x 2 mm Material 1.4401/1.4404 Pipe 168.3 x 2.6 mm Material 1.4401/1.4404 Pipe 15 x 0.6 mm Material 1.4301/1.4307 Pipe 18 x 0.7 mm Material 1.4301/1.4307 Pipe 22 x 0.7 mm Material 1.4301/1.4307 Pipe 28 x 0.8 mm Material 1.4301/1.4307 Pipe 35 x 1 mm Material 1.4301/1.4307 Pipe 42 x 1.1 mm Material 1.4301/1.4307 Pipe 54 x 1 .2 mm, Material 1.4301/1.4307 Pipe 76.1 x 1.5 mm Material 1.4301/1.4307 Pipe 15 x 1 mm Material 1.4301/1.4307 Pipe 18 x 1 mm Material 1.4301/1.4307 Pipe 22 x 1. 2 mm Material 1.4301/1.4307 Pipe 28 x 1.2 mm Material 1.4301/1.4307 Pipe 35 x 1.5 mm Material 1.4301/1.4307 Pipe 42 x 1.5 mm Material 1.4301/1.4307 Pipe 54 x 1.5 mm Material 1.4301/1.4307 Pipe 76.1 x 2 mm Material 1.4301/1.4307 Pipe 88.9 x 2 mm Material 1.4301/1.4307 Pipe 108 x 2 mm Material 1.4301/1.4307 Pipe 114.3 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2.6 mm Material 1.4301/1 .4307 Pipe 168.3 x 2 mm Material 1.4301/1.4307 Pipe 168.3 x 2.6 mm Material 1.4301/1.4307

Product Images

Approval Holder:

ISOTUBI SL

Company Name

ISOTUBI SL

Address

Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN

Country

Spain

General Email

xavi.armengou@isotubi.com

View All Listings by this Company

Manufacturer:

ISOTUBI SL

Company Name

ISOTUBI SL

Address

Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN

Country

Spain

General Email

xavi.armengou@isotubi.com

View All Listings by this Company

Range of copper press fittings with EPDM seals for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251012009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Hengsheng logo (HS) and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

6002 (Press 90° Bend C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6001 (Press 90° Bend FTG×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6041 (Press 45° Bend C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6040 (Press 45° Bend FTG×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6130 (Press Tee C×C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6130R (Press Reducing Tee C×C×C): 15mm×15mm×12mm, 22mm×22mm×15mm, 22mm×22mm×12mm, 22mm×15mm×15mm, 22mm×15mm×22mm, 28mm×28mm×22mm, 28mm×28mm×15mm, 28mm×15mm×22mm, 28mm×22mm×22mm, 28mm×15mm×28mm, 28mm×22mm×28mm, 35mm×35mm×28mm, 35mm×35mm×22mm, 35mm×35mm×15mm, 42mm×42mm×35mm, 42mm×42mm×28mm, 42mm×42mm×22mm, 42mm×42mm×15mm, 54mm×54mm×42mm, 54mm×54mm×35mm, 54mm×54mm×28mm, 54mm×54mm×22mm. 6301 (Press Cap): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6270 (Press Straight Coupling C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. J6270 (Press Slip Coupling C×C): 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6240 (Press Reducing Coupling C×C): 15mm×12mm, 22mm×15mm, 22mm×18mm, 28mm×22mm, 28mm×15mm, 35mm×28mm, 35mm×22mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 54mm×42mm, 54mm×35mm. 6243 (Press Fitting Reducer Ftg×C): 15mm×12mm, 22mm×15mm, 28mm×22mm, 28mm×15mm, 35mm×28mm, 35mm×22mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm.

Product Images

Approval Holder:

Ningbo Hengsheng Pipe Fitting Co.,Ltd.

Company Name

Ningbo Hengsheng Pipe Fitting Co.,Ltd.

Address

No. 28, West Jinshui Road, Ninghai, Ningbo, Zhejiang

Country

China

Phone

0086-574-65338995

General Email

sales@hengshen.com

View All Listings by this Company

Fastwarm range of M type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404080

Size:

see models

Marking:

FASTWARM, size & underfloor heating on fitting.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

STRAIGHT COUPLING CxC: FW-KM101-S1515 15mm FW-KM101-S2222 22mm FW-KM101-S2828 28mm FW-KM101-S3535 35mm FW-KM101-S4242 42mm FW-KM101-S5454 54mm FW-KM101-S6767 66.7mm FW-KM101-S7676 76.1mm FW-KM101-S8989 88.9mm FW-KM101-S108108 108mm SLIP COUPLING C x C: FW-KML102-S1515 15mm FW-KML102-S2222 22mm FW-KML102-S2828 28mm FW-KML102-S3535 35mm FW-KML102-S4242 42mm FW-KML102-S5454 54mm FW-KML102-S6767 66.7mm FW-KML102-S7676 76.1mm FW-KML102-S8989 88.9mm FW-KML102-S108108 108mm REDUCING COUPLING C x C: FW-KM107-S2215 22mm x 15mm FW-KM107-S2815 28mm x 15mm FW-KM107-S2822 28mm x 22mm FW-KM107-S3515 35mm x 15mm FW-KM107-S3522 35mm x 22mm FW-KM107-S3528 35mm x 28mm FW-KM107-S4215 42mm x 15mm FW-KM107-S4222 42mm x 22mm FW-KM107-S4228 42mm x 28mm FW-KM107-S4235 42mm x 35mm FW-KM107-S5422 54mm x 22mm FW-KM107-S5428 54mm x 28mm FW-KM107-S5435 54mm x 35mm FW-KM107-S5442 54mm x 42mm FW-KM107-S6728 66.7mm x 28mm FW-KM107-S6735 66.7mm x 35mm FW-KM107-S6742 66.7mm x 42mm FW-KM107-S6754 66.7mm x 54mm FW-KM107-S7635 76.1mm x 35mm FW-KM107-S7642 76.1mm x 42mm FW-KM107-S7654 76.1mm x 54mm FW-KM107-S7667 76.1mm x 66.7mm FW-KM107-S8942 88.9mm x 42mm FW-KM107-S8954 88.9mm x 54mm FW-KM107-S8967 88.9mm x 66.7mm FW-KM107-S8976 88.9mm x 76.1mm FW-KM107-S10842 108mm x 42mm FW-KM107-S10854 108mm x 54mm FW-KM107-S10867 108mm x 66.7mm FW-KM107-S10876 108mm x 76.1mm FW-KM107-S10889 108mm x 88.9mm FITTING REDUCER F x C: FW-KM108-S2215 22mm x 15mm FW-KM108-S2815 28mm x 15mm FW-KM108-S2822 28mm x 22mm FW-KM108-S3515 35mm x 15mm FW-KM108-S3522 35mm x 22mm FW-KM108-S3528 35mm x 28mm FW-KM108-S4215 42mm x 15mm FW-KM108-S4222 42mm x 22mm FW-KM108-S4228 42mm x 28mm FW-KM108-S4235 42mm x 35mm FW-KM108-S5415 54mm x 15mm FW-KM108-S5422 54mm x 22mm FW-KM108-S5428 54mm x 28mm FW-KM108-S5435 54mm x 35mm FW-KM107-S5415 54mm x 15mm FW-KM108-S5442 54mm x 42mm FW-KM108-S6728 66.7mm x 28mm FW-KM108-S6735 66.7mm x 35mm FW-KM108-S6742 66.7mm x 42mm FW-KM108-S6754 66.7mm x 54mm FW-KM108-S7635 76.1mm x 35mm FW-KM108-S7642 76.1mm x 42mm FW-KM108-S7654 76.1mm x 54mm FW-KM108-S7667 76.1mm x 66.7mm FW-KM108-S8942 88.9mm x 42mm FW-KM108-S8954 88.9mm x 54mm FW-KM108-S8967 88.9mm x 66.7mm FW-KM108-S8976 88.9mm x 76.1mm FW-KM108-S10842 108mm x 42mm FW-KM108-S10854 108mm x 54mm FW-KM108-S10867 108mm x 66.7mm FW-KM108-S10876 108mm x 76.1mm FW-KM108-S10889 108mm x 88.9mm 90DEG ELBOW C x C: FW-KM103-L1515 15mm FW-KM103-L2222 22mm FW-KM103-L2828 28mm FW-KM103-L3535 35mm FW-KM103-L4242 42mm FW-KM103-L5454 54mm FW-KM103-L6767 66.7mm FW-KM103-L7676 76.1mm FW-KM103-L8989 88.9mm FW-KM103-L108108 108mm 90DEG STREET ELBOW F x C: FW-KM104-L1515 15mm FW-KM104-L2222 22mm FW-KM104-L2828 28mm FW-KM104-L3535 35mm FW-KM104-L4242 42mm FW-KM104-L5454 54mm FW-KM104-L6767 66.7mm FW-KM104-L7676 76.1mm FW-KM104-L8989 88.9mm FW-KM104-L108108 108mm 45DEG ELBOW C x C: FW-KM105-L1515 15mm FW-KM105-L2222 22mm FW-KM105-L2828 28mm FW-KM105-L3535 35mm FW-KM105-L4242 42mm FW-KM105-L5454 54mm FW-KM105-L6767 66.7mm FW-KM105-L7676 76.1mm FW-KM105-L8989 88.9mm FW-KM105-L108108 108mm 45DEG STREET ELBOW F x C: FW-KM106-L1515 15mm FW-KM106-L2222 22mm FW-KM106-L2828 28mm FW-KM106-L3535 35mm FW-KM106-L4242 42mm FW-KM106-L5454 54mm FW-KM106-L6767 66.7mm FW-KM106-L7676 76.1mm FW-KM106-L8989 88.9mm FW-KM106-L108108 108mm CAP C x C: FW-KM111-D1515 15mm FW-KM111-D2222 22mm FW-KM111-D2828 28mm FW-KM111-D3535 35mm FW-KM111-D4242 42mm FW-KM111-D5454 54mm FW-KM111-D6767 66.7mm FW-KM111-D7676 76.1mm FW-KM111-D8989 88.9mm FW-KM111-D108108 108mm EQUAL TEE C x C: FW-KM109-T151515 15mm FW-KM109-T222222 22mm FW-KM109-T282828 28mm FW-KM109-T353535 35mm FW-KM109-T424242 42mm FW-KM109-T545454 54mm FW-KM109-T676767 66.7mm FW-KM109-T767676 76.1mm FW-KM109-T898989 88.9mm FW-KM109-T108108108 108mm PART CROSSOVER F x C: FW-KM113-L1515 15mm FW-KM113-L2222 22mm CROSSOVER C x C: FW-KM112-S1515 15mm FW-KM112-S2222 22mm REDUCER ELBOW FW-KM103-L2215 22mm x 15mm FW-KM103-L2815 28mm x 15mm FW-KM103-L2822 28mm x 22mm REDUCING TEE: FW-KM110-T221515 22mm x 15mm x 15mm FW-KM110-T222215 22mm x 22mm x 15mm FW-KM110-T282222 28mm x 22mm x 22mm FW-KM110-T282822 28mm x 28mm x 22mm FW-KM110-T281522 28mm x 15mm x 22mm FW-KM110-T282815 28mm x 28mm x 15mm FW-KM110-T352222 35mm x 22mm x 22mm FW-KM110-T353522 35mm x 35mm x 22mm FW-KM110-T353528 35mm x 35mm x 28mm FW-KM110-T423535 42mm x 35mm x 35mm FW-KM110-T152215 15mm x 22mm x 15mm FW-KM110-T222822 22mm x 28mm x 22mm FW-KM110-T221522 22mm x 15mm x 22mm FW-KM110-T281528 28mm x 15mm x 28mm FW-KM110-T282228 28mm x 22mm x 28mm FW-KM110-T351535 35mm x 15mm x 35mm FW-KM110-T352235 35mm x 22mm x 35mm FW-KM110-T352835 35mm x 28mm x 35mm FW-KM110-T421542 42mm x 15mm x 42mm FW-KM110-T422242 42mm x 22mm x 42mm FW-KM110-T422842 42mm x 28mm x 42mm FW-KM110-T423542 42mm x 35mm x 42mm FW-KM110-T541554 54mm x 15mm x 54mm FW-KM110-T542254 54mm x 22mm x 54mm FW-KM110-T542854 54mm x 28mm x 54mm FW-KM110-T543554 54mm x 35mm x 54mm FW-KM110-T544254 54mm x 42mm x 54mm FW-KM110-T672867 66.7mm x 28mm x 66.7mm FW-KM110-T673567 66.7mm x 35mm x 66.7mm FW-KM110-T674267 66.7mm x 42mm x 66.7mm FW-KM110-T675467 66.7mm x 54mm x 66.7mm FW-KM110-T762276 76.1mm x 22mm x 76.1mm FW-KM110-T762876 76.1mm x 28mm x 76.1mm FW-KM110-T763576 76.1mm x 35mm x 76.1mm FW-KM110-T764276 76.1mm x 42mm x 76.1mm FW-KM110-T765476 76.1mm x 54mm x 76.1mm FW-KM110-T766776 76.1mm x 66.7mm x 76.1mm FW-KM110-T894289 88.9mm x 42mm x 88.9mm FW-KM110-T895489 88.9mm x 54mm x 88.9mm FW-KM110-T896789 88.9mm x 66.7mm x 88.9mm FW-KM110-T897689 88.9mm x 76.1mm x 88.9mm FW-KM110-T10854108 108mm x 54mm x 108mm FW-KM110-T10867108 108mm x 66.7mm x 108mm FW-KM110-T10876108 108mm x 76.1mm x 108mm FW-KM110-T10889108 108mm x 88.9mm x 108mm

Product Images

Approval Holder:

Fastwarm Limited

Company Name

Fastwarm Limited

Address

Unit 13 Carnival Park Basildon Essex

Postcode

SS14 3WN

Phone

01228 744 479

General Email

support@fastwarm.com

View All Listings by this Company