Range of non-rising spindle gate valves with bronze, brass or DZR brass (V2143R) bodies, incorporating hand wheel or key operated operating members. Maximum working pressure 16.0 Bar (V2143R) 25.0 bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

2312392

Size:

See models.

Marking:

Tecofi, CR (V2143R-DZR only) DN and PN on body

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Bronze Bodied Gate Valves: V2143R (Hand Wheel) Size: ½” - 2” BSP (F), NPT (F) or BSPP (F). V2142A (Hand Wheel) Size: ½” - 2” BSP (F), NPT (F) or BSPP (F). V2144R (Key Operated) Size: ½” - 2” BSP (F), NPT (F) or BSPP (F). Brass Bodied Gate Valves: V1142R (Hand Wheel) Size: ½” - 2” BSP (F), NPT (F) or BSPP (F). V1144R (Key Operated) Size: ½” - 2” BSP (F), NPT (F) or BSPP (F). V2143R-DZR (Hand Wheel & DZR brass) Size: ½” - 2” BSP (F), NPT (F) or BSPP (F).

Approval Holder:

TECOFI

Company Name

TECOFI

Address

2 Rue Barthélemy Thimonier ZAC Everest Lyon

Postcode

69740

Country

France

General Email

j.ortega@tecofi.fr

View All Listings by this Company

Range of balancing valves with bronze bodies and DZR brass bonnets. Maximum working pressure 20.0 bar. Maximum operating temperature 85⁰C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

250508003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Hattersley logo, PN, flow arrow, GM and size on body. Hattersley on handwheel.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Fig 1432 - Double regulating valve ½”, ¾”, 1”, 1 ¼”, 1 ½” and 2” BSP 20.0 bar. Fig 1432L - Low flow double regulating valve ½” BSP 20.0 bar. Fig 1732 - Fixed orifice double regulating valve ½”, ¾”, 1”, 1 ¼”, 1 ½” and 2” BSP 20.0 bar. Fig 1732AT - Fixed orifice double regulating valve – American thread ½”, ¾”, 1”, 1 ¼”, 1 ½” and 2” 20.0 bar Fig 1732C - Fixed orifice double regulating valve – Compression 15mm and 22mm 16.0 bar. Fig 1732M - Medium flow fixed orifice double regulating valve ½” BSP 20.0 bar Fig 1732MC - Medium flow fixed orifice double regulating valve – Compression 15mm 16.0 bar Fig 1732L - Low flow fixed orifice double regulating valve ½” BSP 20.0 bar Fig 1732LC - Low flow fixed orifice double regulating valve – Compression 15mm 16.0 bar

Approval Holder:

Hattersley

Company Name

Hattersley

Address

Crane House Epsilon Terrace West Road Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

General Email

uksales@hattersley.com

View All Listings by this Company

'VETOPROOF EC722'. Site applied, grey coloured, two-part epoxy coating. Mix parts A and B in a 85.4:14.6 weight ratio and apply three coats as per manufacturer's Method Statement 'MoS-SA-G1101-M-AK-09-23', dated '18 September 2023'. Cure first coat for 24 hours at 23°C, second coat for 24 hours at 23°C and third coat for 7 days at 23°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

250455039

Expiry date:

30/04/2030

Approval Holder:

Saudi Vetonit Co. Ltd. (SAVETO)

Company Name

Saudi Vetonit Co. Ltd. (SAVETO)

Address

PO Box 52235, Riyadh 11563

Country

Saudi Arabia

View All Listings by this Company

'R579 TP13582 BLACK & R579 TP14619 BLACK'. Black coloured, rotomoulded PE materials. For use with water up to 85°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250355033

Expiry date:

31/03/2030

Approval Holder:

Prisma Colour Limited

Company Name

Prisma Colour Limited

Postcode

SK22 1AH

View All Listings by this Company

'TP14371'. Blue coloured polyethylene material manufactured by roto-moulding. For use with water up to 85°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250555035

Expiry date:

31/05/2030

Approval Holder:

Prisma Colour Limited

Company Name

Prisma Colour Limited

Postcode

SK22 1AH

View All Listings by this Company