Range of vertical cased and insulated direct and indirect unvented stainless steel hot water storage cylinders. Fitted with a Caleffi 309463 GLD temperature and pressure relief valve sat at 6 bar & 90°C, and supplied with an inlet control group consisting of in-line pressure reducing valve (Caleffi set at 3 bar) and pressure relief valve (Caleffi CWIC200055) set at 4.5 bar, and incorporates a stainless-steel mesh and an approved check valve cartridge (verified by test suitable for backflow protection against Fluid Category 2), expansion vessel and filling loop. Maximum working pressure 4.4 bar. Maximum operating temperature 99°C.

Section:

1890 Unvented Heating Apparatus

Size:

28mm compression.

Marking:

Ideal Heating, Manufacturers name, address, date of manufacturer, capacity, model no, serial no, pressure and technical information on adhesive label on body.

Installation Requirements:

R001 R140 R360 R511 R530

Expiry date:

31/05/2028

Model:

IDEPLUHP150DUOPPSZSL & IDEPLUHP180DUOPPSZSL. 475mm diameter 150, 180, litre; single coil cylinders on top of a buffer cylinder for coupling with a range of heat pumps 5kW to 14kW; Pre-plumbed and pre-wired; single zone

Approval Holder:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall Mounted Concealed. Inlets incorporate approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

30/06/2030

Notes & Further Information

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2310177

Size:

See model.

Marking:

Valtech logo, mix, CR and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

TMVIRCC 14.7mm IRISH- Size TMVIRCC 21mm IRISH- Size TMVCC 15mm TMVCC 22mm TMVMM 1/2” Male TMVMM 3/24 Male

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

1130 Baizhang Road Ningbo Zhejiang

Country

China

View All Listings by this Company

1451 series of spring loaded, resilient trim, non-return valves with brass bodies. Maximum working pressure 10.0 bar ½” – 1” and 12.0 bar 1 ¼ - 2”. Maximum operating temperature 85°C.

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

WRAS Approval Number:

250408703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” – 2” BSP (F x F).

Marking:

Flow arrow, PN, size and Conex on body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

1451 series.

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of bronze swing gate valves with bronze bodies and discs (with a metal-to-metal seal). Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:

2250 Valves

Section Subtitle:

Swing gate.

WRAS Approval Number:

250408702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

Conex, PN, size and flow arrow on body. Conex and operating parameters on data label.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

147020RR025xxxx Series: 147020RR0250404 (DN15): ½” BSPT (F) inlet/outlet 147020RR0250606 (DN20): ¾” BSPT (F) inlet/outlet 147020RR0250808 (DN25): 1” BSPT (F) inlet/outlet 147020RR0251010 (DN32): 1¼” BSPT (F) inlet/outlet 147020RR0251212 (DN40): 1 ½” BSPT (F) inlet/outlet 147020RR0251616 (DN50): 2” BSPT (F) inlet/outlet.

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company