Directory Search Results

Print List

#251101701

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve providing a Type AG air gap with a pneumatic or cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. The cistern can be operated by manual push button / push plate, (not supplied). Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
251101701
Size:
½” BSP Inlet connection.
Marking:
Top of cistern lid marked ‘DUDLEY OSMO T1’. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280 R556 R581 R582
Expiry date:
30/11/2030
Model:
OSMO T1 Concealed Cistern (Category 3).
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2212367

Concealed WC dual flushing cistern with a side entry BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure – 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212367
Size:
½” BSP (M).
Marking:
ABI logo inside on plate, 6L waterline within cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
31/12/2027
Model:
ABI In‐Wall Toilet Cistern
Product Images

Approval Holder:
ABI Interiors International Ltd
Company Name
ABI Interiors International Ltd
Address
10 John Street London
Postcode
WC1N 2EB
Country
United Kingdom
Phone
02045 389222
General Email
rhyl.beal@abiinteriors.com

View All Listings by this Company

Print This Approval


#251101702

BS EN 14055: 2018 concealed WC cistern incorporating a side entry compact type float operated inlet valve providing a Type AB air gap with a pneumatic or cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. The cistern can be operated by manual push button / push plate, (not supplied). Maximum working pressure 10.0 bar. Cold water use only.

Section:
2034 Cistern - Flushing
Section Subtitle:
Incorporating Type AB air gap, providing fluid category 5 backflow protection. Suitable for use in a WC suite.
WRAS Approval Number:
251101702
Size:
½” BSP Inlet connection.
Marking:
Top of cistern lid marked ‘DUDLEY OSMO T1’. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280 R574
Expiry date:
30/11/2030
Model:
OSMO T1 Concealed Cistern (Category 5).
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#251004301

Section:
0690 Combination Tap Assemblies
Description:
A Range of Combined bath filler and overflow(s).
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R576
Expiry date:
31/10/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout OutletWastes Includes
58 130 xx0VariousG 1/2"open outlet bar65 °Chansgroheon faceplateYesNot applicableNot ApplicableOpen OutletClick Type
42 540 xx0VariousG 1/2"open outlet bar65 °CAXORon faceplateYesNot applicableNot ApplicableOpen OutletClick Type
58 119 xx0Variousbasic set 58152180open outlet bar65 °Chansgroheon faceplateYesNot applicableNot ApplicableOpen OutletClick Type
58 131 xx0VAriousbasic set 58152180open outlet bar65 °Chansgroheon faceplateYesNot applicableNot ApplicableOpen OutletClick Type
58 152 180NAG 1/2"open outlet bar65 °Chansgrohesticker only, marking will be on the finish setYesNot applicableNot ApplicableOpen Outlet

Notes & Further Information

model 58131xx0 and 58119xx0 are identical in the water pathway, only difference is the cover plate design. model 58130xx0 and 42540xx0 are both composed of the finish set 58131xx0/58119xx0 and basic set 58152180, only difference is the marking on the faceplate 58130xx0= hansgrohe, 42540xx0= AXOR

Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#251015308

Section:
1660 Shower Outlets
Description:
A Range of Shower hose(s)
EPDM lined with interlocking outer (various finishes).
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
31/10/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
SH001*Various½” BSP (F) conical nut x ½” BSP(F) conical nutFor open outlet use only bar85 °CWINSDRUM On conical nutNoNot applicableNot ApplicableNot Applicable
SH002*Various½” BSP (F) conical nut x M15x1For open outlet use only bar85 °CWINSDRUM On conical nutNoNot applicableNot ApplicableNot Applicable

Notes & Further Information

1) The products are interlock type 2) * denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Product Images

Approval Holder:
WINSDRUM Technology (Foshan) Co., Ltd
Company Name
WINSDRUM Technology (Foshan) Co., Ltd
Address
Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng, Foshan City, Guangdong Province
Country
China
Phone
0086-19527590441
General Email
carina07@126.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2305 of 2347

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.