Range of scale inhibitors with chrome plated copper bodies for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Cold water use only.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

14.7mm, 15mm, 21mm & 22mm compression

Marking:

Manufacturer’s logo and size on body

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

31/07/2030

Model:

G2250-015, G2250-022, G2250-147 & G2250-021

Approval Holder:

Zhejiang Fansheng Fluid Control Co., Ltd.

Company Name

Zhejiang Fansheng Fluid Control Co., Ltd.

Postcode

317605

Country

China

Phone

+86 576 8746 0061

General Email

info@IVANCI.com

View All Listings by this Company

'Iupital F10-EW'. White coloured, injection moulded POM material. For use with water up to 85°C.

Section:

5010 Acetal (Components)

Expiry date:

31/07/2030

Approval Holder:

Global Polyacetal Co., Ltd.

Company Name

Global Polyacetal Co., Ltd.

Address

Shiodome Sumitomo-Building 25F 1-9-2, Higashi-shinbashi, Minato Ward, Tokyo 105-0021

Country

Japan

View All Listings by this Company

'KEPITAL F25-03 LOF NAT'. Natural (appears white), injection moulded POM material. For use with water up to 60°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250655043

Expiry date:

30/06/2030

Approval Holder:

Korea Engineering Plastics Co. Ltd.

Company Name

Korea Engineering Plastics Co. Ltd.

Address

84, Jangsaengpo gorae-ro, Nam-Gu, Ulsan, 44781

Country

Korea, Republic of

View All Listings by this Company

'RELIBIT 1001 Coating'. Factory applied, black coloured bitumen coating. Apply as per manufacturer's Standard Operating Procedure & Guidelines 'RP/291', '203/2024, Revision 1', dated '1st April 2024'. Cure for 10 hours@35°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

250755034

Expiry date:

31/07/2030

Approval Holder:

Reliable Paints

Company Name

Reliable Paints

Address

55-A Alindra Extension, Manjusar Gidc, Vadodara, Gujarat, 391775

Country

India

View All Listings by this Company

'ZC-2025HSR'. Factory applied, grey coloured sulphate resistant cement. Mix cement:sand:water in a 1.5:1:0.4 mass ratio and apply as per manufacturer's instructions 'ZC01250725', dated '2025.7.25'. Cure for 8 hours@23°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2109569

Expiry date:

30/09/2026

Approval Holder:

Yingkou Zhuocheng Metal Pipe Fittings Co., Ltd.

Company Name

Yingkou Zhuocheng Metal Pipe Fittings Co., Ltd.

Address

Xianghongqi Village, Jiulongdi Sub-District Office, Gaizhou City, Yingkou City, Liaoning Province

Country

China

View All Listings by this Company