Range of single and doubled sphered rubbered expansion bellows incorporating a variety of flanged end connections. Maximum working pressure 16.0 Bar Cold water use only.

Section:

1530 Miscellaneous Fittings

Marking:

TORAFLEX on body. Size & PN on edge.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

TORAFLEX ® S10 – DN25-300, TORAFLEX® S15 – DN32-300, TORAFLEX® S30 – DN15-80, TORAFLEX® S20 – DN20-300,

Approval Holder:

Comeval Valve Systems S.L y CIA., Soc. Comanditaria

Company Name

Comeval Valve Systems S.L y CIA., Soc. Comanditaria

Address

Les Rotes 15 El Puig de Santa Maria

Postcode

ES 46540

Country

Spain

General Email

carlos.ruiz@comeval.es

View All Listings by this Company

Range of single and doubled sphered rubbered expansion bellows incorporating a variety of flanged end connections. Maximum working pressure 16.0 Bar Cold water use only.

Section:

1530 Miscellaneous Fittings

Marking:

AYVAZ & SIZE on body

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

LKA10 – DN32-300, DKK10 – DN15-80,

Approval Holder:

Haci Ayvaz A.S

Company Name

Haci Ayvaz A.S

Address

Ataturk Organize Sanayi Bolgesi Mustafa Inan Card No 44 Hadimkoy

Country

Istanbul

View All Listings by this Company

Range of circulating pumps with a bronze body, plastic impeller and EPDM gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2309343

Size:

1” BSP (M) or 1½” BSP (M).

Marking:

Rating plate on body including: Wilo, class, PN, model no. and date of production (YYWW).

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

Z Range: Z15/6-* **130**, Z15/7-* **130**, Z20/2-* **130**, Z20/2-* **140**, Z20/5-* **140**, Z20/6-* **140**, Z20/7-* **140**, Z25/6-* **180**, Z25/7-* **180**. Where: 15/20/25 = connection size: 15 or 20 = 1” BSP (M), 25 = 1½” BSP (M). 2/5/6/7 = motor power (head in mWC). * = speed number: 1,2 or 3. 1st ** = electrical connection: PL, PR, CLR, CLF, CRR, CRF, FSL, FSR. 130/140/180 = Pump body dimension (height in mm). 2nd ** = terminal box position: 12,3,6 or 9 o’clock. Example code: Z25/6-3 PL 180 12.

Product Images

Approval Holder:

WILO INTEC

Company Name

WILO INTEC

Address

50 Avenue Eugene Casella, Aubigny sur nere

Postcode

18700

Country

France

Phone

+332 48 81 62 62

General Email

franck.guillaume@wilo.com

View All Listings by this Company

Range of multistage centrifugal pumps, with stainless steel bodies (CRN models) or black coloured cataphoretic electrodeposition coated cast iron bodies (CR models), stainless steel sleeve and impellers. The products can be supplied with or without a sensor. Maximum working pressures (no. of stages in brackets): CR/CRN 95 (1-5): 16.0 bar. CR/CRN 95 (6-8): 25.0 bar. CRN 95 (9-12): 40.0 bar. CR/CRN 125 (1-4): 16.0 bar. CR 125 (5): 25.0 bar. CRN 125 (6-7): 25.0 bar. CRN 125 (8-12): 40.0 bar. CR 155 (1-4): 16.0 bar. CRN 155 (1-4): 16.0 bar. CRN 155 (5-6): 25.0 bar. CRN 155 (7-11): 40.0 bar. CR/CRN 185 (1-3): 16.0 bar. CR/CRN 185 (4-5): 25.0 bar. CR/CRN 185 (6-8): 40.0 bar. CR/CRN 215 (1-3): 16.0 bar. CR/CRN 215 (4-5): 25.0 bar. CR/CRN 215 (6-7): 40.0 bar. CR/CRN 255 (1-3): 16.0 bar. CR/CRN 255 (3-4): 25.0 bar. CR/CRN 255 (5-6): 40.0 bar. When a sensor is incorporated the maximum working pressure is as follows: 25.0 bar with either the IPS44 or VTU sensor, (unless they are used on a pump with a maximum working pressure of 16.0 bar, in this instance the lesser pressure applies). The MBS3000 sensor can be used on all models, the pump maximum working pressure applies. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2310916

Size:

CR/CRN(E) 95 models: DN100 inlets/outlets, CR/CRN(E) 125 & CR/CRN(E) 155 models: DN150 inlets/outlets, CR/CRN(E) 185, CR/CRN(E) 215 & CR/CRN(E) 255 models: DN200 inlets/outlets. CRN(E) 95 models: PJE 4” inlets/outlets, CRN(E) 125 & CRN(E) 155 models: PJE 6” inlets/outlets, CRN(E) 185, CRN(E) 215 & CRN(E) 255 models: PJE 8” inlets/outlets.

Marking:

Grundfos logo, type, model, Prod/Ver no., technical info and manufacturing/assembly country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

31/10/2028

Model:

Model key code: CR/CRN (E) AA-B-C-D-E-F-G-XXXX Where: CR = Pump type and Cast Iron. CRN = Pump type and EN 1.4401. E = Preminum Electronically Controlled Motor (CR /CRN 95 -125 models only). AA: Flow rate [m³/h] - 95 / 125 / 155 / 185 / 215 / 255. B: Number of impellers – dependent on model (1-12). C: Number of reduced diameter impellers - 0 / 1 / 2 / 3 / 4. D: Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, T = Trust handling device, V = Cascade function, X = Special version*, Z = Pump with bearing flange. E: Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (CRN models only). F: Code for materials: A = Basic version, C = Carbon-free pump, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, P = PEEK neck ring, Q = Silicon carbide/silicon carbide bearing in pump and silicon carbide/silicon carbide seal faces in thrust handling device, R = Silicone carbide /silicone carbide bearing, T = Baseplate EN 1.4408, U = Silicon carbide/silicon carbide bearing in pump and silicon carbide/tungsten carbide seal faces in thrust handling device, W = Tungsten carbide/tungsten carbide, X = Special*. G: Code for rubber parts: E = EPDM, V = FKM. XXXX: Code for shaft seal: HQQx, HUUx, HUBx, HQBx. Where: H = Balanced cartridge seal with O-ring B = Carbon, synthetic resin-impregnated U = Cemented tungsten carbide Q = Silicon carbide x can = E or V for rubber parts: E = EPDM, V = FKM. *Special version ONLY covers the situation where more than 4 options are selected within the same position.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of ceiling mounted, shower outlets with chrome plated brass bodies, EPDM seals, stainless steel strainer and flow regulator in the inlets. Supplied with a flexible hose. Maximum working temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2309322

Size:

Stainless steel braided PEX hose with ½” BSP captive nut end connection.

Marking:

Grohe on Body.

Installation Requirements:

R001 R009 R040

Expiry date:

30/09/2028

Model:

27.863 – RAINSHOWER ALLURE 230.

Product Images

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company