Range of EPDM braided hoses (various options) and optional end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

260114001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Model

Marking:

Marking: PPI, WRAS & date of manufacture (YYYY) on crimp connector.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

BZG-A-B-C-XXXX (BZG – Connection A - Connection B – Outer braided material – Length) BZG – The name of our braided tube A-B – Connection A and Connection B (from 01 to 15) 01 = F1/2, 02 = F1/2 Rotating joint, 03 = F3/8, 05 = 15mm compression fitting(17-100), 06 = F15, 07 = F10, 08 = M8*1(L=12-100), 09 = M10*1(L=12-100), 10 = M12*1(L=12-100), 11 = M12*1(two O ring), 12 = M15*1, 13 = T connection（L=2-110), 14 = ￠10 Quick installation connector & 15 = M22*1 C – Outer braided material: SS = stainless steel wire, NY= gray or black nylon wire , SR= stainless steel wire plus red nylon wire, SB= stainless steel wire plus blue nylon wire, NR= gray or black nylon wire plus red nylon wire & NB= gray or black nylon wire plus blue nylon wire. XXXX – Length (15cm to 200cm): 0150=15cm 2000=200cm For example: BZG-01-09-SS-0450 would be for F1/2 x M10, stainless steel braided, 45cm long.

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

502 series of automatic air venting valves with brass bodies, plastic float and EPDM ‘O’-rings. For non-potable water use only. Maximum working pressure 10.0 bar. Maximum operating temperature see models.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

260104002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Caleffi logo on body.

Installation Requirements:

R001 R200

Expiry date:

31/01/2031

Model:

502930 TH 3/8" 110°C 502934 CST 3/8" 110°C 502420 1/4" 115 °C 502430 3/8" 115 °C 502430 CON 3/8" 115 °C 502430 CST 3/8" 115 °C 502431 BSC 3/8" 115 °C 502434 CST 3/8" 115 °C 502435 CST 3/8" 115 °C 502530 TH 3/8" 110°C 502530 TH1 3/8" 110°C 502641 3/8" 115°C 502643A 1/2" NPT 115°C 502533 3/8" 110°C 502533 FRT 3/8" 110°C 502533 TAK 3/8" 110°C 502543 3/8" 110°C 502533 RIF 3/8" 110°C 502530 3/8" 110°C 502141 1/2" 110 °C 502142 1/2" 110 °C 502145 RIF 1/2" 110 °C 502145 RSR 1/2" 110 °C 502630 3/8" 115°C 502630 CST 3/8" 115°C 502636 CST 3/8" 115°C 502638 CST 3/8" 115°C 502638 OEM 3/8" 115°C 502631 CST 3/8" 115°C 502822 1/4" NPT 502620A 1/4" NPT 115°C 502610A 1/8" NPT 115°C 502630 WLF 3/8" 115°C 502634 CST 3/8" 115°C 502640 1/2" 115°C 502649 1/2" 115°C 502649 CST 1/2" 115°C 502730 3/8" 110°C 502730 CST 3/8" 110°C 502730 BSC 3/8" 110°C 502730 NTR 3/8" 110°C 502710A 1/8" NPTF 110°C 502720A 1/4" NPTF 110°C 502030 3/8" 120 °C 502030 CON 3/8" 120 °C 502030 CST 3/8" 120 °C 502035 CST 3/8" 120 °C 502037 CST 3/8" 120 °C 502037 VLL 3/8" 120 °C 502037 WLF 3/8" 120 °C 502038 CST 3/8" 120 °C 502020 CST 1/4" 120 °C 502034 CST 3/8" 120 °C 502130 3/8" 110 °C 502031 3/8" 120 °C 502130 TH1 3/8" 110 °C 502033 CST 3/8" 120 °C 502015A 1/8" NPT 120 °C 502015 B&G 1/8" NPT 120 °C 502015A WEB 1/8" NPT 120 °C 502015 MTR 1/8" NPT 120 °C 502040A 1/2" NPT 120 °C 502040A WEB 1/2" NPT 120 °C 502043A 1/2" NPT 120 °C 502043A CST 1/2" 120 °C 502044 CST 1/2" 120 °C 502040 1/2" 120 °C 502040 CST 1/2" 120 °C 502043 1/2" 120 °C 502043 CST 1/2" 120 °C 502140 1/2" 110 °C 502140 FRT 1/2" 110 °C 502041 1/2" 120 °C 502041 MI 1/2" 120 °C 502046 IMM 1/2" 120 °C 502221 1/4" 120°C 502231 3/8" 120°C 502231 CST 3/8" 120°C 502232 TH 3/8" 120°C 502241 1/2" 120°C 502243A 1/2" NPTF 120°C 502343A 1/2" NPTF 120°C 502246 IMM 1/2" 120°C 502242 TH 1/2" 120°C 502115A 1/8" NPT 110 °C 502133 3/8" 110 °C 502131 3/8" 110 °C 502131 TH 3/8" 110 °C 502132 DEC 3/8" 110 °C 502130 CST 3/8" 110 °C 502130 FRT 3/8" 110 °C 502130 TAK 3/8" 110 °C 502130 TH 3/8" 110 °C 502135 RIF 3/8" 110 °C 502050 3/4" 120 °C 502051 3/4" 120 °C 502052 CST 3/4" 120 °C 502060 1" 120 °C 502055 120 °C 502061 1" 120 °C 502067 1" 120 °C 502400 CST Press fitting ø22,2 customer designed 115 °C 501500 3/4" 120 °C

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Wall mounted shower valve (various finishes) incorporating a quarter turn ceramic disc headwork controlling flow on/off and to either the overhead shower or the handset (CAM-149T-RRK-XXX). Temperature is controlled via a thermostatic cartridge with a manual override button. The inlets incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure: 5bar. Maximum operating temperature: 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250708019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The products are not supplied with shower hose, overhead shower headset or shower handset.

Size:

15m compression.

Marking:

Vado on mixer body & accessories.

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2030

Model:

CAM-149T-XXX, CAM-149T-RRK-XXX. T- Thermostatic. RRK- Rigid riser kit. Suffixes that replace XXX to denote colour finish: MB- Matt Black, MW- Matt White, SBR- Satin Brass CP or C/P - Chrome.

Approval Holder:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar Somerset

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company

Range of wall mounted thermostatic mixing valves (chromium plated brass) incorporating a sequential headwork controlling both flow and temperature using a single lever operating member. Inlets incorporate servicing valves and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250503308

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Not supplied with a shower hose and handset.

Size:

15mm compression

Marking:

N&C logo on operating member

Installation Requirements:

R001 R020

Expiry date:

31/05/2030

Model:

P6820140

Approval Holder:

Nicholls & Clarke Group

Company Name

Nicholls & Clarke Group

Address

41-51 Freshwater Road Chadwell Heath Essex

Postcode

RM8 1SP

Country

United Kingdom

Phone

020 8586 4600

View All Listings by this Company

Range of T type thermostatic blending valves with (brass bodies - chrome plated finishes). The inlets incorporate a stainless-steel strainer. ISO models incorporate a servicing valve on each inlet. For use with copper pipe (BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

241002111

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Model

Marking:

V&G logo & flow arrow on body.

Installation Requirements:

R001 R010 R040 R120

Expiry date:

31/10/2029

Model:

VG-10012-15 VG-10012-20 VG-10014-15 VG-10014-20

Approval Holder:

Zhejiang Valogin Technology Co Ltd

Company Name

Zhejiang Valogin Technology Co Ltd

Address

Qinggang Technological Ind. Zone, Yuhuan, Taizhou Zhejiang

Country

China

Phone

+86 (0)574 8907 1560

View All Listings by this Company