Directory Search Results

Print List

#250612011

Angled servicing valves with chrome plated brass bodies incorporating triangular type operating member. Maximum working pressure 16.0 Bar Maximum operating temperature 85 °C.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
250612011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" x 3/8" BSP (M) 1/2" x 1/2" BSP (M)
Marking:
'HC' logo & size on body.
Installation Requirements:
R001
Expiry date:
30/06/2030
Model:
HC-1175Y-A10 HC-1175Y-G15 HC-1177Y-A10 HC-1177Y-G15

Approval Holder:
Home Creator Group Ltd
Company Name
Home Creator Group Ltd
Address
167 - 169 Great Portland Street London
Postcode
W1W 5PF

View All Listings by this Company

Print This Approval


#250704020

Range of screw down stop valves with plastic bodies, NBR washers and ‘O’ rings. For use with polyethylene pipe (manufactured to EN 12201). For above and below ground use. Maximum working pressure 6 bar. Cold water use only.

Section:
2320 Valves
Section Subtitle:
Stop, plastic, screw down.
WRAS Approval Number:
250704020
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
Elysee, size and pressure on nut.
Installation Requirements:
R001
Expiry date:
31/07/2030
Model:
103SC0032 Elysee Stop cock 32 x 32 103SC0025 Elysee Stop cock 25 x 25 103SC0025 Elysee Stop cock 20 x 20 PE 100 103SC0020 Elysee Stop cock 20 x 20 PE 80

Approval Holder:
Elysee Irrigation Ltd.
Company Name
Elysee Irrigation Ltd.
Address
5, Pentadaktylou St. 2643 Ergates Industrial Area, Nicosia
Country
Cyprus
Phone
+357 22 455 000

View All Listings by this Company

Print This Approval


#250702718

Inlet control group with a DZR brass body, consisting of a pressure reducing valve and pressure relief valve (4.5, 6.0 or 8.0 Bar). The inlet incorporates a stainless-steel strainer, and the outlet incorporates an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The product is for use with copper pipe to BS EN 1057. Outlet pressure range of the pressure reducing valve is 1.0 to 4.0 bar Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
250702718
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm compression
Marking:
Intatec logo, CR , flow arrow, PN & DN on body. Intatec logo, 6.0 bar & BSEN 14941 on cap.
Installation Requirements:
R001
Expiry date:
31/07/2030
Model:
UVGS22GH06 UVGS22GH08 UVGS22GH45

Print This Approval


#250704710

Monobloc manifold containing an in-line pressure reducing valve (Adjustment Range between 2.7 and 3.3 bar, but factory pre-set at 3 bar) and a pre-set expansion relief valve (pre-set pressure 6 bar) housed in a DZR brass body with an EPDM rubber diaphragm. The product incorporates also a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Inlets and outlets have compression connections, for use with copper pipe to EN1057. Maximum working pressure 12 bar. Maximum operating temperature 80°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
250704710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm Compression
Marking:
Officine Rigamonti spa logo, flow arrow and CR cast on body. Officine Rigamonti spa logo, size and CR cast on pressure relief valve body. PN10, 115℃ and CE mark etched on on pressure relief valve body. 6 bar and Made in Italy on operating gear.
Installation Requirements:
R001 R120
Expiry date:
31/07/2030
Model:
Art.0218.999 Control Group Multiblock

Approval Holder:
Officine Rigamonti Spa
Company Name
Officine Rigamonti Spa
Address
Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)
Country
Italy
Phone
+39 0163 48 165 Fax: +39 0163347254
General Email
info@officinerigamonti.it

View All Listings by this Company

Print This Approval


#2201116

BT1420-DFM Range of regulating valves with blue epoxy coated ductile iron bodies incorporating EPDM gaskets and hand wheel operating member. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:
2348 Valves
Section Subtitle:
Balancing.
WRAS Approval Number:
2201116
Size:
DN65 - DN300 flanged inlet and outlet connections
Marking:
BLAZE, model, PN, WRAS and other technical information on name plate on body. DN, PN, and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
BT1420-DFM series

Approval Holder:
Blazetech Systems Ltd.
Company Name
Blazetech Systems Ltd.
Address
Integer Millennium House, Bucknalls Lane, Watford
Postcode
WD25 9XX
Country
United Kingdom
General Email
info@blaze-tech.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2250 of 2293

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.