'ANUBIT HB-1000'. Factory applied, black coloured bitumen coating. Apply as per manufacturer's TDS 'AE-TDS-023-2021', dated '02.08.2024'. Please note that use of a thinner isn't covered by the scope of this approval. Cure for 40 minutes@30°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

250355071

Expiry date:

31/03/2030

Approval Holder:

Anupam Enterprises

Company Name

Anupam Enterprises

Address

113, Park Street 5th Floor, Block-B, Kolkata, 700 016, West Bengal

Country

India

View All Listings by this Company

'Jerlac High Build Bituminous Black'. Factory applied, black coloured bituminous coating. Apply as per manufacturer's work instruction document 'GPC/WI/10' issue no. '01', dated 03/01/2018. Cure for 72 hours@30°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

250255052

Expiry date:

28/02/2030

Approval Holder:

M/S German Polymers and Coatings (PVTE) Limited

Company Name

M/S German Polymers and Coatings (PVTE) Limited

Address

No-18, Othivakkam Village Kumuzhi Panchayat, Chengalpet District, Pin-603202, Tami Nadu

Country

India

View All Listings by this Company

'HT 204'. Grey coloured carbon bearing, pressed, sintered, impregnated with phenolic resin and rebaked. For use with water up to 85°C.

Section:

5022 Carbon

Expiry date:

31/03/2030

Approval Holder:

Eurocarbo S.p.A

Company Name

Eurocarbo S.p.A

Address

Via S. Scolastica 35, Corropoli, 64013

Country

Italy

Phone

0861 839020

General Email

info@eurocarbo.it

View All Listings by this Company

'P.HSR 42.5-010Y'. Factory applied, grey coloured, Sulphate resistant Portland cement. Mix cement, sand and water in a 1:1.5:0.5 mass ratio and apply as per manufacturer's usage instructions 'JXT/JS02-10', edition '1/0', dated '2021-11-30'. Cure for 240 minutes@25°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250355022

Expiry date:

31/03/2030

Approval Holder:

Hebei Juxing Intelligent Equipment Manufacturing Co, LTD

Company Name

Hebei Juxing Intelligent Equipment Manufacturing Co, LTD

Address

Shangquan Village and Beibaishi Village, Wuji Town, Wu'an City, Handan City, Hebei Province

Country

China

View All Listings by this Company

'Jotapipe AC - 1003 Blue and Jotapipe AC - 1003 Green'. Factory applied, blue or green coloured fusion bonded epoxy coatings (manufactured in Dubai, U.A.E). Apply as per manufacturer's Technical Data Sheet dated 26th September 2019. Cure for 2 minutes@245°C. The blue coating is for use with water up to 85°C. The green coating is for use with water up to 23°C. If the curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250355032

Expiry date:

31/03/2030

Approval Holder:

Jotun Powder Coatings UAE L.L.C

Company Name

Jotun Powder Coatings UAE L.L.C

Address

P.O. Box 51033, Dubai

Country

United Arab Emirates

View All Listings by this Company