‘Klubertop TP 38-901’. Site applied, (transparent) white coloured PTFE lubricant coating. Apply and cure as per Kluber Lubrication product information sheet ‘Prod. 099030, en-GB, Edition 12.05.2022’. For use with water up to 85°C.
'68093X'. Factory applied, blue coloured epoxy powder coating. Apply per manufacturer's instructions 'V2.3' dated March 2018. Cure for 20 minutes@200°C For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Kinlin Epoxy Power Coating (Green colour, EPX‐111A)'. Factory applied, green coloured epoxy powder coating. Apply as per manufacturer's instructions 'XL-R-019-G1' dated '2018-9-21'. Cure for 10 minutes@180°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Planigraph LG'. Grey coloured graphite material manufactured by expansion/compression moulding. For use with water up to 85°C.
'Planigraph LGRF'. Grey coloured, steel-reinforced, graphite material manufactured by calendaring. For use with water up to 85°C.
'KORASILON® Paste hochviskos' & 'KORASILON® Paste M-S 2-200'. White coloured (translucent) lubricants. Apply as per manufacturer's Product Data Sheet '30.01.2023'. For use with water up to 85°C.
'Magnetic Rotor, 011201_02_02'. Black coloured, injection moulded nylon magnet rotor component. For use with water up to 85°C.
'POLYWORK® H2G50DW NC' (appears off-white) & 'POLYWORK® H2G50DW BK' (black coloured). Injection moulded glass fibre reinforced PA66+PA6I/6T materials. For use with water up to 85°C.
'Vydyne A SG Natural WR'. Natural (appears white in colour), injection moulded PA 66 material. For use with water up to 85°C.
'Akoalit PB 4237 and Akoalit PB 4238 White'. Grey or white coloured, extruded PB materials. For use with water up to 85°C.
'Spectrum Polyester Felt Filter Media'. White coloured, extruded, polyester felt media. For use with water up to 38°C.
'Spectrum Polyethersulfone Pleated Filter Media'. White coloured, pleated polyethersulfone filter media/membrane, manufactured by casting. For use with water up to 85°C.
'LK PE-Xa pipe'. The pipes are either single layered or multi-layered (3 or 4 layers). The single layered, extruded pipes are natural (off-white coloured) PE-Xa. The multi-layered, extruded and IR cross-linked pipes have a natural (off-white coloured) PE-Xa inner layer, an adhesive layer, an oxygen barrier layer based on EVOH and then an optional 4th, adhesive layer. All are for use with water up to 85°C.
'BWRB1620200'. In July 2024 the following pipes were added to the approval: ‘BWRB1620100, BWRB2020200, BTRB2525100 & BTRB3230100. Triple layered, extruded pipes consisting of an off-white coloured PERT inner layer, aluminium middle layer and white coloured PERT outer layer. For use with water up to 85°C.
'PPA-GF10-NC' (natural, appears yellow-green) & 'PPA-GF10-BK' (black coloured). Injection moulded PPA materials. For use with water up to 85°C.
'Flowtech & Atlas PP-R Pipe'. Green coloured, extruded PP-R pipes. For use with water up to 85°C.
'Polytech PPR Pipes'. Green coloured, extruded PPR pipes. For use with water up to 85°C.
'Vissen PP-R Pipe'. Green coloured (red, external stripe), extruded PP-R pipe. For use with water up to 85°C.
'AQUA PLUS PPR-CT Pipe'. Green coloured, extruded, single layered polypropylene pipe. For use with water up to 85°C.
'AQUA PLUS PPR-CT GF'. Extruded, triple layered polypropylene pipe consisting of a green coloured polypropylene inner layer, natural (appears grey in colour) glass fibre middle layer and green coloured polypropylene outer layer. For use with water up to 85°C.
Page 217 of 390
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
