Directory Search Results

Print List

#250512006

Range of EPDM or PVC lined, interlocked stainless-steel shower hoses. Open outlet use only. Hoses with an EPDM liner have a maximum operating temperature of 85°C. Hoses with an PVC liner have a maximum operating temperature of 65°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
250512006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F) captive nut end connections
Marking:
NT (company logo), WRAS & date of manufacture (YYYY) on sleeve
Installation Requirements:
R001 R040
Expiry date:
31/05/2030
Model:
NT (stainless steel double lock)-X-ww-xx-yyy-zzz Where – X = inner hose: A – EPDM, B – PVC. ww = connector size: 01 = G½” Hexagon nut. xx = connector size: 01 = G½” Conical nut. yyy = hose bore: 140 = DN14, 160 = DN16. zzz = hose length: 50cm to 300cm.

Approval Holder:
Xiamen Nuote Sanitary Ware Co. Ltd.
Company Name
Xiamen Nuote Sanitary Ware Co. Ltd.
Address
no 563 TONLONG SECOND ROAD TORCH HI TECH ZONE
Postcode
CHINA
Country
XIAMEN

View All Listings by this Company
Manufacturer:
Xiamen Nuote Sanitary Ware Co. Ltd.
Company Name
Xiamen Nuote Sanitary Ware Co. Ltd.
Address
no 563 TONLONG SECOND ROAD TORCH HI TECH ZONE
Postcode
CHINA
Country
XIAMEN

View All Listings by this Company

Print This Approval


#250488007

Range of PVC outer layer shower hoses with a PVC internal layer and EPDM washers. Open outlet use only. Maximum operating temperature:60C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
250488007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F) Captive nut.
Marking:
Aqualisa on ferrule
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
707019 1.5m Smooth Hose Matt Black AL241 Shower Hose

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#241202067

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections. Maximum working pressure: 6.0 bar @ 65°C Maximum working pressure: 12.0 bar @ 20°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241202067
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
12BAR @ 20°C
Size:
See model
Marking:
Qualflex, QWRAS, 6bar@65°c /12 bar @20°c, DOM (M.YY) stamped on ferrule
Installation Requirements:
R001 R008
Expiry date:
31/12/2029
Model:
(HOSE900001): DN10 x Brass 3/4BSP Female Elbow x Brass 1/2BSP Female straight. (HOSE202105): DN10 x Brass 3/4BPP Female Straight x Brass 3/4BSP Male (HOSE900004): DN10 x Brass 3/8BSP Female Elbow x Brass 1/2BSP Female straight (HOSE202107): DN10 x Brass 3/4BSP Female Elbow x Brass 3/4BSP Female straight. (HOSE265012) : DN10 x Brass 15mm Compression x Brass 3/8NPT Male

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company
Manufacturer:
Hydralectric Group Ltd.
Company Name
Hydralectric Group Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company

Print This Approval


#2305361

Range of vertical cased and insulated direct and indirect unvented stainless steel hot water storage cylinders. Fitted with a Caleffi 309463 GLD temperature and pressure relief valve sat at 6 bar & 90°C, and supplied with an inlet control group consisting of in-line pressure reducing valve (Caleffi set at 3 bar) and pressure relief valve (Caleffi CWIC200055) set at 4.5 bar, and incorporates a stainless-steel mesh and an approved check valve cartridge (verified by test suitable for backflow protection against Fluid Category 2), expansion vessel and filling loop. Maximum working pressure 4.4 bar. Maximum operating temperature 99°C.

Section:
1890 Unvented Heating Apparatus
Size:
28mm compression.
Marking:
Ideal Heating, Manufacturers name, address, date of manufacturer, capacity, model no, serial no, pressure and technical information on adhesive label on body.
Installation Requirements:
R001 R140 R360 R511 R530
Expiry date:
31/05/2028
Model:
IDEPLUHP150DUOPPSZSL & IDEPLUHP180DUOPPSZSL. 475mm diameter 150, 180, litre; single coil cylinders on top of a buffer cylinder for coupling with a range of heat pumps 5kW to 14kW; Pre-plumbed and pre-wired; single zone

Approval Holder:
Ideal Boilers Ltd
Company Name
Ideal Boilers Ltd
Address
PO Box 103 National Avenue Hull East Yorkshire
Postcode
HU5 4JN
Country
United Kingdom
Phone
07775659359
General Email
ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Print This Approval


#250504006

Range of brass bodied automatic air venting valves incorporating a plastic float. Maximum working pressure 10.0 bar. Maximum operating temperature 110°C

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
250504006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
SEE MODELS
Marking:
L Officine Rigamonti Spa logo (OR), PN, temp & Valmat on body
Installation Requirements:
R001 R200
Expiry date:
31/05/2030
Model:
502.012 3/8” BSP (M) 502.015 ½” BSP(M) 502.020 ¾” BSP (M) 502.024 1” BSP (M)

Approval Holder:
Officine Rigamonti Spa
Company Name
Officine Rigamonti Spa
Address
Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)
Country
Italy
Phone
+39 0163 48 165 Fax: +39 0163347254
General Email
info@officinerigamonti.it

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2160 of 2235

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.