Range of hand showers and shower arm kits with (brass bodies - various finishes. The inlets of the hand showers and the inlet elbows incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Open outlet use only. Maximum operating temperature 65°C.

Section:

1670 Shower Outlets

Section Subtitle:

Shower kit(s)

WRAS Approval Number:

250602017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP female (with a ½” BSPP male adaptor for international use) for hand showers. 1/2" NPT male for shower arm.

Marking:

Waterworks logo on handset (BHS010, HNHS010 & CNHS10) Waterworks on escutcheon (BHS010 & BSH001CO)

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

Hand Showers: BHS010XZZ BHS010ZZ HNHS010ZZ CNHS10ZZ Shower Arm: BSH001XZZ Where XX denotes the finish and can be replaced by: AC = Antique Copper AB = Architectural Bronze AQB = Antique Brass BZ = Architectural Bronze C = Polished Chrome CO = Concordia DN = Dark Nickel G = Gold L = Lumin M = Matte Nickel MC = Matte Chrome MG = Matte Gold MS = Matte Silver N = Polished Nickel S = Silver SC = Shiny Copper SO = Sovereign UB = Unlacquered Brass Where XX denotes the handle components and can be replaced by: 0 = Less Handles 1 = Cross Handle 2 = Two‐Tone Cross Handle 3 = Coin Edge Cross Handle 10 = Solo Series Lever Handle 11 = Lever Handle 12 = Two‐Tone Lever Handle 13 = Coin Edge Lever Handle 14 = Walnut Lever Handle 15 = Leather Lever Handle 20 = Solo Series Straight Lever Handle 2A = Tandem Series Guilloche Lines Lever Handle 2B = Tandem Series Two‐Tone Lever Handle 2C = Union Series Guilloche Link Lever Handle 2D = Union Series Enamel Guilloche Lines Lever Handle 2E = Union Series Guilloche Pinstripe Lever Handle 2P = Solo Series Two‐Piece Straight Lever Handle 2S = Bond Rally Series Lever Handle 2T = Teak Lever Handle 30 = Solo Series Knob Handle 3S = Bond Rally Series Knob Handle 4A = Tandem Series Guilloche Lines Knob Handle 4B = Tandem Series Two‐Tone Guilloche Knob Handle 4D = Union Series Enamel Guilloche Lines Knob Handle 5C = Union Series Guilloche Link Knob Handle 7A = Tandem Series Guiloche Lines Lever handles with Gland Cover 7B = Tandem Series Two Tone Lever handles with Gland Cover 7C = Union Series Guiloche Link Lever handles with Gland Cover 7D = Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E = Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P = Solo Series Two Piece Straight Lever handle with Gland Cover 7S = Bond Rally Series Lever Handle With Gland Cover 7T = Tandem Series Teak lever with Gland Cover 8Z = Straight Lever Handle 90 = Solo Series Straight Lever handles with Gland Cover

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London

Postcode

WC1N2EB

Country

United Kingdom

View All Listings by this Company

Section:

0440 Headworks

Description:

A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

Brass body/bodies

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/07/2030

Approval Holder:

ZHEJIANG GAOAO SANITARY WARE CO.,LTD.

Company Name

ZHEJIANG GAOAO SANITARY WARE CO.,LTD.

Address

No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province

Postcode

318020

Country

China

General Email

2900324142@qq.com

View All Listings by this Company

Manufacturers:

Zhejiang Gaoao Sanitary Ware Co., Ltd. Jiangkou Branch

Kisdon range of single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The outlet of the pull-out spray incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

250814303

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP

Marking:

WIX on tap body

Installation Requirements:

R001 R090

Expiry date:

31/08/2030

Model:

170099 311142 313077 313078 313079 313087

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Range of single-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The products are supplied with click type pop up waste (verified by test). Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240702084

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

ESTEEM on front of body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2029

Model:

E61111 Brushed Brass E61108 Matt Black E61117 Brushed Brass E61114 Matt Black

Approval Holder:

UK Plumbing Supplies Ltd

Company Name

UK Plumbing Supplies Ltd

Address

Quayside 2A Wilderspool Park Greenalls Avenue Cheshire

Postcode

WA4 6HL

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with (brass bodies - various finishes), incorporating a ceramic disc headwork with various type operating members. The spout outlet incorporates a plastic aerator. Product is supplied with click type pop-up waste – not verified by test. Maximum working pressure 6 Bar. Maximum operating temperature 65°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP F

Marking:

Waterworks on spout outlet.

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Model:

HKM4ZZX CLS4ZZX HLS4ZZX Suffix Options: Where ZZ represents handle components 0 - Less Handles 1 - Cross Handle 2 - Two‐Tone Cross Handle 3 - Coin Edge Cross Handle 10 - Solo Series Lever Handle 11 - Lever Handle 12 - Two‐Tone Lever Handle 13 - Coin Edge Lever Handle 14 - Walnut Lever Handle 15 - Leather Lever Handle 20 - Solo Series Straight Lever Handle 2A - Tandem Series Guilloche Lines Lever Handle 2B - Tandem Series Two‐Tone Lever Handle 2C - Union Series Guilloche Link Lever Handle 2D - Union Series Enamel Guilloche Lines Lever Handle 2E - Union Series Guilloche Pinstripe Lever Handle 2P - Solo Series Two‐Piece Straight Lever Handle 2S - Bond Rally Series Lever Handle 2T - Teak Lever Handle 30 - Solo Series Knob Handle 3S - Bond Rally Series Knob Handle 4A - Tandem Series Guilloche Lines Knob Handle 4B - Tandem Series Two‐Tone Guilloche Knob Handle 4D - Union Series Enamel Guilloche Lines Knob Handle 5C - Union Series Guilloche Link Knob Handle 7A - Tandem Series Guiloche Lines Lever handles with Gland Cover 7B - Tandem Series Two Tone Lever handles with Gland Cover 7C - Union Series Guiloche Link Lever handles with Gland Cover 7D - Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E - Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P - Solo Series Two Piece Straight Lever handle with Gland Cover 7S - Bond Rally Series Lever Handle With Gland Cover 7T - Tandem Series Teak lever with Gland Cover 8Z - Straight Lever Handle 90 - Solo Series Straight Lever handles with Gland Cover

Where X represents External Colour or Finish Options AC - Antique Copper AB - Architectural Bronze AQB - Antique Brass BZ - Architectural Bronze C - Polished Chrome CO - Concordia DN - Dark Nickel G - Gold L - Lumin M - Matte Nickel MC - Matte Chrome MG - Matte Gold MS - Matte Silver N - Polished Nickel S - Silver SC - Shiny Copper SO - Sovereign UB - Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company