Directory Search Results

Print List

#2012032

Range of stainless steel braided EPDM lined hose assemblies with EPDM O-rings and some models incorporate a servicing valve. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2012032
Size:
SEE MODEL
Marking:
GCE, WRAS, size and date of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
DN17) HD125A/15W: 300mmx 1/2" BSP Captive Nut x 15mm Push Fit (DN17) HD225A/15W: S00mmx 1/2" BSP Captive Nut x 15mm Push Fit (DN17) HD325A/15W: 1000mmxl/2" BSP Captive Nut x 15mm Push Fit (DN17) HD425A/15W: 150mm 1/2" BSP Captive Nut x 15mm Push Fit (DN17) HD125B / 22W: 300mm x 1/2" BSP Captive Nut x 22mm Push Fit (DN17) HD225B / 22W: 500mm x 1/2" BSP Captive Nut x 22mm Push Fit (DN17) HD325B / 22W: 1000mm x 1/2" BSP Captive Nut x 22mm Push Fit (DN13) HD125G / 15W: 300mm M12 x 15mm Push fit Monobloc (DN17) HD125H / 300mm x 15W 15mm Push Fit X 15mm Push Fit (DN17) HD225H / 500mm x 15W 15mm Push Fit X 15mm Push Fit (DN13) HD125F/15W: 300mm M10 x 15mm Push fit Monobloc (DN17) HD125H/22W:300mm22mm Push fit 22mm Push fit (DN17) HD225H/22W:500mm 22mm Push fit 22mm Push fit (DN17) HD125D/15W: 15mm Push fit x 1/2" BSP Captive Nut Elbow (DN17) HDW125E/15W: 300mm x 1/2" BSP Captive Nut x 15mm Push fit Service Valve (DN17) HDW225E/15W: 500mm x 1/2" BSP Captive Nut x 15mm Push fit Service Valve (DN17) HD125EH/15W: 300mm x 1/2" BSP Captive Nut x 15mm Push fit Service Valve Handle

Approval Holder:
Wavin UK
Company Name
Wavin UK
Address
Hazelhead Crow Edge Sheffield
Postcode
S36 4HG

View All Listings by this Company

Print This Approval


#2011011

Wall mounted, exposed manual blending valve with brass body (various finishes) incorporating a ceramic cartridge headwork, which controls both temperature and flow and has a single lever operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2011011
Size:
¾” to ½” Offset Unions.
Marking:
Hansgrohe on body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2025
Model:
15 672 xxx Hansgrohe PuraVida Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2104700

Range of wall mounted manually operated, concealed blending valves (brass body) incorporating ceramic cartridge headworks with single lever operating members and a manual diverter to shower outlets with single lever operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2104700
Size:
½” BSP (F)
Marking:
VOLA on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2025
Model:
VOLA 2400V VOLA 2400FV VOLA 2400NV VOLA 2400RV VOLA 2400TV

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval


#2012028

Range of wall mounted, flow control valves with brass bodies and various trim sets (various finishes). Flow is controlled to the outlets via a push to on push to off ‘detent’ headwork. Maximum Working Pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2012028
Size:
For insertion into Hansgrohe I-box with ¾” BSP (F) inlet/outlet
Marking:
Hansgrohe or AXOR on backing plate.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2025
Model:
Hansgrohe ShowerSelect Valve for concealed installation for 3 functions: 15 745 xxx 15 764 xxx 36 717 xxx AXOR - square 36 727 xxx AXOR - round 36 773 xxx AXOR - softcube Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/ or letters, as examples: 00 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2108800

Wall mounted, bar type thermostatic shower mixers (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with single lever operating members. Both inlets incorporate a stainless steel strainer and a single check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2108800
Size:
¾” BSP (M) reducer x 15mm compression.
Marking:
Methven on body. DTC14 (brand of methven) on rear of body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/08/2026
Model:
SOLBEF – SOL bar shower

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 209 of 2215

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.