A range of four-hole single outlet fixed combination tap assemblies with brass bodies in a variety of finishes (See models). Incorporating ¼ ceramic disc headworks with single lever operating members and a self-cancelling diverter to a shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet elbow incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. This product is supplied with a shower hose, shower handset and metal screw clamp type back nuts. The side valves and the spout are connected with a copper tube. Maximum working pressure 10 bar. Maximum working temperature 60 °C.

Section:

0680 Combination Tap Assemblies

Section Subtitle:

Multi hole tap(s) with a single outlet and a swivel spout , incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3).

WRAS Approval Number:

2112042

Size:

For use with basic set 13244180 which has ½” BSP (M) inlets

Marking:

HANSGROHE on Spout

Installation Requirements:

R001 R006 R030

Expiry date:

31/12/2026

Model:

HG Vernis Blend 4 hole bath mixer chrome models: 71 456 xxx 71 459 xxx Has to be installed with basic set 13 244 180 (HG 4 hole bath mixer basic set) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of wall elbows incorporating brass bodies (various finishes) and various back plates. Maximum operating temperature 95ºC.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2112004

Size:

½” BSP (M)

Marking:

SHS on body.

Installation Requirements:

R001 R040

Expiry date:

31/12/2026

Model:

V264-W-XX Fairfield Elbow V664-W-XX Style Moderne Elbow V764-W-XX Landmark Elbow T164-W-XX 100 Collection Elbow “XX” denotes choice of finish available and can be replaced with any of the following: CP = Chrome Plate PN = Polished Nickel SSF = Stainless Steel Finish NL = Non-Lacquered BG = Brushed Gold BGG = Brushed Gold Gloss lacquered BGM = Brushed Gold Matt Lacquered CTB = City Bronze CNB = Country Bronze AG = Antique Gold MOP = Matt Finish MBC = Matt Black Chrome SSB = Stainless steel finish URB = Urban Brass URM = Urban Brass Matt

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of basin spout outlets with brass bodies (various finishes), the outlet incorporates either a metal aerators, plastic aerators or open outlet (depending on model). Maximum working pressure 3.5 bar. Maximum operating temperature 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2201309

Size:

¾” BSP (M)

Marking:

THG on body.

Installation Requirements:

R010 R040

Expiry date:

31/01/2027

Model:

xxx.xxx.22G/W wall mounted goliath spout xxx.xxx.22SG/W wall mounted super goliath spout First xxx = style Second xxx = finish Style xxx.xxx.22SG/W Broadway A04 Broadway à manettes - A52 Broadway LE 11 BY ALBERTO PINO U2A le 11 by alberto pinto - U2B le 11 by alberto pinto a manettes POMME A42 pomme cristal clair satine - A46 pomme cristal lustre or - U2D infini porcelaine blanche - U2E infini porcelaine blanche décor platine - U2F infini porcelaine blanche décor or ART DECO A54 Art Déco - A55 Art Déco à manettes - A56 Art Déco Cristal - A57 Tradition - A58 Tradition à manettes - A59 Tradition Cristal BELUGA G1T BELUGA - G1U BELUGA A MANETTES BEYOND U6F Beyond Crystal cristal clair - U6G Beyond Crystal cristal aqua - U6H Beyond Crystal cristal rouge - U6J Beyond Crystal cristal couleur champagne - U6K Beyond Crystal - cristal bleu CHARLESTON G29 Charleston - G3N Charleston à manettes métal lisse - G75 Charleston à manettes FAUBOURG A2I Perle - A7D Capucine mauve décor Or -A7E Capucine vert décor Platine - G2H Le 9 howlite - G2I Le 9 Nero Marquina - G2J Faubourg porcelaine blanche à manettes - G2K Faubourg porcelaine blanche - G2L Faubourg porcelaine noire - G2M Faubourg porcelaine noire à manettes - G2N Froufrou - G2P Froufrou à manettes - G2R Frivole - G2S Frivole à manettes - G2T Faubourg métal - G2U Faubourg métal à manettes - G58 Spirit à manettes - G69 Spirit METAMORPHOSE G6A Métamorphose - G6B Métamorphose à manettes - G6C Métamorphose carbone - G6D Métamorphose céramique noire - G6E Métamorphose céramique blanche -G6F Métamorphose à manettes coloris spécifique MOSSI A2N Mossi cristal clair - A9B Jaipur cristal satiné - U4E Duomo - U6D Pétale de Cristal noir - A41 Dahlia - A9C Jaipur Onyx noir - U4F Duomo cristal - U6E Pétale de Cristal clair liseré doré -A7A Ithaque décor Or - A9D Jaipur Quartz rose - U5A Flore - U7A Trocadéro Malachite - A7B Ithaque décor Platine - A9F Jaipur métal - U5B Island - U7B Trocadéro Lapis Lazuli - A7F Marquise noir décor Or - E53 Najem - U5C Paradise - U7C Trocadéro Jaspe Rouge - A7G Marquise blanc décor Platine - U1A Mandarine métal -U5D Sun Dragon - U7D Trocadéro Onyx noir A8B Vogue Améthyste - U1D Mandarine cristal clair -U5G Moon Dragon -U7E Trocadéro Oeil de Tigre - A8M Vogue Malachite - U1E Mandarine cristal clair satiné - U5H Jade Dragon - U8A Wedding - A8N Vogue Jaspe rouge - U1K Mandarine Cristallia Diamant - U5J Rose - A8P Vogue Onyx noir - U4A Diplomate bagues lisses - U6A Pétale de Cristal clair - A8R Vogue Oeil de tigre - U4B Diplomate bagues annelées - U6B Pétale de Cristal bleu - A8S Vogue Lapis Lazuli - U4C Diplomate bagues torsadées - U6C Pétale de Cristal rouge PRESTIGE A1J Amboise Malachite - A2G Ange - A1K Amboise Lapis Lazuli - A2H Panthère cristal clair - A1L Amboise Jaspe rouge - A2J Papillon - A1M Amboise Onyx noir - A2K Panthère cristal noir - A1S Cheverny Malachite - A3T Amboise Marbre à définir - A1T Cheverny Lapis Lazuli - A3V Cheverny Marbre à définir - A1U Cheverny Jaspe rouge - A3Y Sully Marbre à définir - A1V Sully Malachite - U1S Sully Onyx blanc - A1W Sully Lapis Lazuli - U1T Sully Onyx noir - A1X Sully Jaspe rouge - U1V Cheverny Onyx noir - A2C Océania - A2E Venice - A2F Naïade PROFIL A6A Profil métal - A6B Profil métal à manettes - A6G Profil Lalique cristal clair - A6H Profil Lalique cristal clair à manettes - A6J Profil Couleur à définir - A6K Profil à manettes - Couleur à définir - A6L Profil Lalique cristal noir - A6N Profil Onyx noir - A6P Profil Onyx noir à manettes PURE A2R Masque de Femme Lunaire - A2S Masque de Femme Solaire - A2T Masque de Femme, métal gravé - A2U Masque de Femme, métal lisse - G04 Pure - U5E Ginkgo - U5F Vegetal SHAO A33 Bambou cristal noir - A34 Bambou cristal Ambre - A35 Bambou cristal clair xxx.xxx.22G/W BEAUBOURG – ST GERMAIN G7C Saint Germain-G7D Saint Germain à manettes-G7ABeaubourg-G7B Beaubourg à manettes MALMAISON U8B Monte Carlo porcelaine or - U8C Monte Carlo porcelaine or blanc - U93 Malmaison métal - U94 Malmaison cristal - U95 Malmaison Portoro - U97 Malmaison Howlite NANO G5A Nano - G5B Nano à manettes - G5D Anoa corne noire PULLMAN A2A Métropolis cristal clair - A2B Métropolis cristal clair à manettes - A2L Métropolis cristal noir - A2M Métropolis cristal noir à manettes - G79 Cubica - J17 Beverley VENDOME G47 Vendôme ROCHAMBEAU G13 Rochambeau - G14 Versailles BAGATELLE U3A Bagatelle métal - U3B Bagatelle métal à manettes - U3E Bagatelle pierre noire - U3F Bagatelle pierre noire à manettes Finishing A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD H58 – Brushed stainless steel color PVD H59 – Stainless steel color PVD H60 – Matt blush PVD H62 – Blush PVD H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD

Product Images

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

ERA-01 range of SDR11 and SDR17 polyethylene butt welded fittings for use with ERA-02 range of SDR11 and SDR17 PE 100 pipe. SDR11 rated pipe and fittings have a maximum working pressure of 16.0 bar. SDR17 rated pipe and fittings have a maximum working pressure of 10.0 bar. For above and below ground use. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112025

Size:

SDR11 pipe and fittings = DN75 – DN315. SDR17 pipe and fittings = DN160 – DN315.

Marking:

‘ERA®’ and technical information on pipe and fitting.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

ERA-01 range of fittings (90° elbow, 45° elbow, flange, cross, straight tee, reducing cross, reducing tee, end cap and reducing socket) for use with ERA-02 pipe.

Product Images

Approval Holder:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

Range of copper press fittings with EPDM seals for use with EN1057 copper tube. The joints are achieved by means of a press tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112303

Size:

see models

Marking:

Company logo (HS) and size on body

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

6002(Press 90° Bend C×C) 12,15,22,28,35,42,54mm 6001(Press 90° Bend FTG×C) 12,15,22,28,35,42,54mm 6041(Press 45° Bend C×C) 12,15,22,28,35,42,54mm 6040(Press 45° Bend FTG×C) 12,15,22,28,35,42,54mm 6130(Press Tee C×C×C) 12,15,22,28,35,42,54mm 6301(Press Cap) 12,15,22,28,35,42,54mm 6270(Press CouplingC×C) 12,15,22,28,35,42,54mm 6130R(Press ReducingTee C×C×C) 15×15×12, 22×22×15, 22×22×12, 22×15×15, 22×15×22, 28×28×22, 28×28×15, 28×15×22, 28×22×22, 28×15×28, 28×22×28, 35×35×28, 35×35×22,35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42, 54×54×35, 54×54×28, 54×54×22 6240 (Press Reducing Coupling C×C) 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35; 6243 (Press Fitting Reducer Ftg×C) 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35, 54×28, 54×22

Approval Holder:

Ningbo Hengsheng Pipe Fitting Co Ltd

Company Name

Ningbo Hengsheng Pipe Fitting Co Ltd

Address

No. 28 West Jinshui Road, Ninghai, Zhejiang

Country

China

Phone

0086-574-65338995

General Email

sales@hengshen.com

View All Listings by this Company