Water meter manifold with a gunmetal body. The product incorporates a non-return valve (not suitable for backflow protection) and a spherical valve on the inlet. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1" BSP (F) x 1” BSP (F).

Marking:

WATERFIT, Waterfit logo, flow arrow and size on body. CR on crutch head and cap.

Installation Requirements:

R001

Expiry date:

28/02/2030

Model:

SACAXX004038

Manufacturer:

Waterfit Ltd

Company Name

Waterfit Ltd

Address

PO Box 28 293 Birmingham New Road Dudley

Postcode

DY1 4SJ

Country

West Midlands

Phone

0121 5207987

View All Listings by this Company

Mixing valve incorporating a brass body and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure10.0 bar. Maximum operating temperature 65°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) captive nut

Marking:

Presto on body

Installation Requirements:

R001 R008 R010

Expiry date:

31/01/2030

Model:

29424 MIXER G1/2

Product Images

Manufacturer:

Les Robinets Presto S.A

Company Name

Les Robinets Presto S.A

Address

4 Rue Lavoiser St. Georges De Didonne

Postcode

17110

Country

France

Phone

+33 546 053 452

View All Listings by this Company

Range of pumps with plastic bodies, pistons and TPE diaphragm. For use with John Guest LLDPE pipe. The products incorporate non-return valves (not suitable for backflow protection). Maximum working pressure: 8.27 Bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002707

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

5/16” push fitting.

Marking:

LEFOO, model number, production batch# and related technical parameters on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

LFP-ABC-D. Model code description:LFP-ABC-D LF means LEFOO, P means Pump A means voltage,0=12V,1=24V,2=36V,5=115V,6=230V B means flow rate,=050,075,100,150,200,300,400,500,600,800,1000 C means function,=W means stabilized;=S means self-priming) D means motor type;=A, B, P or Blank； A - Downgrade Brush motor, B - Brushless motor, Blank - Brush motor, P - Upgraded brush motor

Product Images

Manufacturer:

Lefoo Industrial Co., Ltd.

Company Name

Lefoo Industrial Co., Ltd.

Address

NO.118 Changda Road, Linping Street, Linping District, Hangzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

P 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. P 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. P 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. P 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Foras (Brand of Pentax), model code and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

P range: P X(S) - XX/Y (T) Where: P = pump model X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. P 3S models: P 3S-50/2; P 3S-70/3; P 3S-90/4; P 3S-100/5; P 3S-120/6; P 3S-150/7. P 5S models: P 5S-70/2; P 5S-80/3; P 5S-120/4; P 5S-150/5; P 5S-180/6; P 5S-200/7. P 7S models: P 7S-100/2; P 7S-120/3; P 7S-180/4; P 7S-250/5; P 7S-300/6. P 9S models: P 9S-100/2; P 9S-150/3; P 9S-200/4; P 9S-250/5. P 3S models: P 3S-50/2 T; P 3S-70/3 T; P 3S-90/4 T; P 3S-100/5 T; P 3S-120/6 T; P 3S-150/7 T. P 5S models: P 5S-70/2 T; P 5S-80/3 T; P 5S-120/4 T; P 5S-150/5 T; P 5S-180/6 T; P 5S-200/7 T. P 7S models: P 7S-100/2 T; P 7S-120/3 T; P 7S-180/4 T; P 7S-250/5 T; P 7S-300/6 T; P 7S-350/7 T. P 9S models: P 9S-100/2 T; P 9S-150/3 T; P 9S-200/4 T; P 9S-250/5 T. P 18S models: P 18S-180/2 T; P 18S-250/3 T; P 18S-400/4 T.

Approval Holder:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Range of booster pumps with stainless steel bodies, impellers and non-return valves (not suitable for backflow protection) at the inlets. From June 2025 the pumps are available with plastic or stainless steel impellers. Maximum working pressure 6.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250102716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (M).

Marking:

Pedrollo Spa logo on front panel. Model and product information on adhesive label.

Installation Requirements:

R001 R008 R415

Expiry date:

31/01/2030

Model:

DG-BLU 3, DG PED 3 EVO, DG-BLU 5, DG PED 5 EVO, DUAL DG-BLU 3+3, DUAL DG PED EVO 3+3, DUAL DG-BLU 3+5, DUAL DG PED EVO 3+5, DUAL DG-BLU 5+5, DUAL DG PED EVO 5+5.

Product Images

Manufacturer:

Pedrollo S.p.A.

Company Name

Pedrollo S.p.A.

Address

via Enrico Fermi, 7 37047 San Bonifacio (VR)

Country

Italy

Phone

+39 045 6136311

View All Listings by this Company