‘HLBRxx’ range of brass or DZR brass compression fittings for use with copper pipe (manufactured to EN 1057). The HLBRTC‐1 tank connector, HLBRSS‐1 and HLBRBS‐1 tap connectors all incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250915008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model: 8-54mm, ¼” - 2” BSP (M) or (F).

Marking:

HL and size on nut or body. DZR brass fittings are also marked CR.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

HLBRRC‐1 Reducing Coupling 10mm x 8mm, HLBRRC‐1 Reducing Coupling 15mm x 8mm, HLBRRC‐1 Reducing Coupling 15mm x 10mm, HLBRRC‐1 Reducing Coupling 15mm x 12mm, HLBRRC‐1 Reducing Coupling 22mm x 15mm, HLBRRC‐1 Reducing Coupling 28mm x 15mm, HLBRRC‐1 Reducing Coupling 28mm x 22mm, HLBRSS‐1 Straight Swivel Tap Connector 15mm x 1/2", HLBRSS‐1 Straight Swivel Tap Connector 15mm x 3/4", HLBRSS‐1 Straight Swivel Tap Connector 22mm x 3/4", HLBRBS‐1 Bent Swivel Tap Connector 15mm x 1/2", HLBRBS‐1 Bent Swivel Tap Connector 22mm x 3/4", HLBRTC‐1 Tank Connector 15mm, HLBRTC‐1 Tank Connector 22mm, HLBRTC‐1 Tank Connector 28mm, HLBRTC‐1 Tank Connector 35mm, HLBRER‐1 Elbow Reducer 22mm x 15mm, HLBRFB‐1 Female Backplate Elbow 15mm x 1/2" female, HLBRFB‐1 Female Backplate Elbow 22mm x 3/4" female, HLBRCN‐1 Compression Nut 15mm, HLBRCN‐1 Compression Nut 22mm, HLBRCN‐1 Compression Nut 28mm, HLBRCC‐1 Compression Cap / Blank Nut 1/2", HLBRCB‐1 Compression Blank Capnut 22mm, HLBRRT‐1 Reducing Tee 15mm x 15mm x 22mm, HLBRRT‐1 Reducing Tee 22mm x 15mm x 15mm, HLBRRT‐1 Reducing Tee 22mm x 15mm x 22mm, HLBRRT‐1 Reducing Tee 22mm x 22mm x 15mm, HLBRRT‐1 Reducing Tee 22mm x 22mm x 28mm, HLBRRT‐1 Reducing Tee 28mm x 28mm x 15mm, HLBRRT‐1 Reducing Tee 28mm x 15mm x 28mm, HLBRRT‐1 Reducing Tee 28mm x 28mm x 22mm, HLBRFB‐2 Female Branch Tee 15mm x 15mm x 1/2", HLBRFB‐2 Female Branch Tee 22mm x 22mm x 1/2", HLBRFB‐2 Female Branch Tee 22mm x 22mm x 3/4", HLBRFB‐2 Female Branch Tee 28mm x 28mm x 1/2", HLBRFE‐2 Female End Tee 15mm x 1/2" x 15mm, HLBRRS‐1 Reducing Set (3 part) 15mm x 8mm, HLBRRS‐1 Reducing Set (3 part) 15mm x 10mm, HLBRRS‐1 Reducing Set (3 part) 22mm x 15mm, HLBRRS‐1 Reducing Set (3 part) 28mm x 15mm, HLBRRS‐1 Reducing Set (3 part) 28mm x 22mm, HLBRRS‐1 Reducing Set (3 part) 35mm x 22mm, HLBRTA‐1 Tap Adaptor Male x Female 1/2", HLBRBR‐1 Burst Repair Coupling 15mm x 15mm x 80mm, HLBRSC‐1 Straight Coupling 8mm, HLBRSC‐1 Straight Coupling 10mm, HLBRSC‐1 Straight Coupling 15mm, HLBRSC‐1 Straight Coupling 22mm, HLBRSC‐1 Straight Coupling 28mm, HLBRSC‐1 Straight Coupling 35mm, HLBRSC‐1 Straight Coupling 42mm, HLBRSC‐1 Straight Coupling 54mm, HLBRMC‐1 Male Coupling 8mm x 1/4" male, HLBRMC‐1 Male Coupling 10mm x 1/4" male, HLBRMC‐1 Male Coupling 10mm x 1/2" male, HLBRMC‐1 Male Coupling 10mm x 3/8" male, HLBRMC‐1 Male Coupling 15mm x 1/4" male, HLBRMC‐1 Male Coupling 15mm x 3/8" male, HLBRMC‐1 Male Coupling 15mm x 1/2" male, HLBRMC‐1 Male Coupling 15mm x 3/4" male, HLBRMC‐1 Male Coupling 22mm x 1/2" male, HLBRMC‐1 Male Coupling 22mm x 3/4" male, HLBRMC‐1 Male Coupling 22mm x 1" male, HLBRMC‐1 Male Coupling 28mm x 1" male, HLBRMC‐1 Male Coupling 28mm x 1.1/4" male, HLBRMC‐1 Male Coupling 35mm x 1.1/4" male, HLBRMC‐1 Male Coupling 42mm x 1. 1/2" male, HLBRMC‐1 Male Coupling 54mm x 2" male, HLBRFC‐1 Female Coupling 8mm x 1/4" female, HLBRFC‐1 Female Coupling 10mm x 1/4" female, HLBRFC‐1 Female Coupling 10mm x 3/8" female, HLBRFC‐1 Female Coupling 10mm x 1/2" female, HLBRFC‐1 Female Coupling 15mm x 1/2" female, HLBRFC‐1 Female Coupling 15mm x 3/8" female, HLBRFC‐1 Female Coupling 15mm x 3/4" female, HLBRFC‐1 Female Coupling 22mm x 1/2" female, HLBRFC‐1 Female Coupling 22mm x 3/4" female, HLBRFC‐1 Female Coupling 22mm x 1" female, HLBRFC‐1 Female Coupling 28mm x 1" female , HLBRFC‐1 Female Coupling 35mm x 1.1/4" female, HLBRFC‐1 Female Coupling 42mm x 1.1/2" female, HLBRFC‐1 Female Coupling 54mm x 2" female, HLBRSE‐1 Stop End 8mm, HLBRSE‐1 Stop End 10mm, HLBRSE‐1 Stop End 15mm, HLBRSE‐1 Stop End 22mm, HLBRSE‐1 Stop End 28mm, HLBRSE‐1 Stop End 35mm, HLBRSE‐1 Stop End 42mm, HLBRSE‐1 Stop End 54mm, HLBRIR‐1 Internal Reducer 15mm x 8mm, HLBRIR‐1 Internal Reducer 10mm x 8mm, HLBRIR‐1 Internal Reducer 15mm x 10mm, HLBRIR‐1 Internal Reducer 22mm x 15mm, HLBRIR‐1 Internal Reducer 28mm x 15mm, HLBRIR‐1 Internal Reducer 28mm x 22mm, HLBRE‐1 Elbow 8mm, HLBRE‐1 Elbow 10mm, HLBRE‐1 Elbow 15mm, HLBRE‐1 Elbow 22mm, HLBRE‐1 Elbow 28mm, HLBRE‐1 Elbow 35mm, HLBRE‐1 Elbow 42mm, HLBRME‐1 Male Elbow 15mm x 1/2" male, HLBRME‐1 Male Elbow 15mm x 3/4" male, HLBRME‐1 Male Elbow 22mm x 3/4" male, HLBRME‐1 Male Elbow 22mm x 1" male, HLBRME‐1 Male Elbow 28mm x 1" male, HLBRFE‐1 Female Elbow 15mm x 1/2" female, HLBRFE‐1 Female Elbow 15mm x 3/4" female, HLBRFE‐1 Female Elbow 22mm x 3/4" female, HLBRFE‐1 Female Elbow 22mm x 1" female, HLBRFE‐1 Female Elbow 28mm x 1" female, HLBRET‐1 Equal Tee 8mm, HLBRET‐1 Equal Tee 10mm, HLBRET‐1 Equal Tee 15mm, HLBRET‐1 Equal Tee 22mm, HLBRET‐1 Equal Tee 28mm, HLBRET‐1 Equal Tee 35mm, HLBRET‐1 Equal Tee 42mm, HLBRET‐1 Equal Tee 54mm.

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

‘BF’ range of Brass compression fittings for use with copper pipe manufactured to EN1057 Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250602051

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

South Coast Sales logo on body. EN 1254 and Size on compression Nut.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

BF range comprising of models: BF34821 ¾” Compression x ½” Compression BF34831 1” Compression x 1/2" Compression BF34832 1” Compression x ¾” Compression BF3101 ½” Compression BF3102 ¾” Compression BF3103 1” Compression BF31021 ¾” Compression x ½” Compression BF31032 1” Compression x 1/2" Compression BF31031 1” Compression x ¾” Compression BF3111 ½” BSP (M) x ½” Compression BF31112 ½” BSP (M) x ¾” Compression BF3112 ¾” BSP (M) x ¾” Compression BF31121 ¾” BSP (M) x ½” Compression BF31123 ¾” BSP (M) x 1” Compression BF3113 1” BSP (M) x 1” Compression BF31132 1” BSP (M) x ¾” Compression BF3121 ½” BSP (F) x ½” Compression BF31212 ½” BSP (F) x ¾” Compression BF3122 ¾” BSP (F) x ¾” Compression BF31221 ¾” BSP (F) x ½” Compression BF31223 ¾” BSP (F) x 1” Compression BF3123 1” BSP (F) x 1” Compression BF31232 1” BSP (F) x ¾” Compression BF3141 ½” Compression x 1/2"swivel F BF3271 ½” Compression x 1/2"swivel F BF3151 ½” Compression BF3152 ¾” Compression BF3153 1” Compression BF31521 ¾” Compression x 1/2" Compression BF31532 1" Compression x ¾” Compression BF3161 ½” BSP (M) x ½” Compression BF31612 ½” BSP (M) x ¾” Compression BF3162 ¾” BSP (M) x ¾” Compression BF31621 ¾” BSP (M) x ½” Compression BF31623 ¾” BSP (M) x 1” Compression BF3163 1” BSP (M) x 1” Compression BF31632 1” BSP (M) x ¾” Compression BF3171 ½” BSP (M) x ½” Compression BF31712 ½” BSP (M) x ¾” Compression BF3172 ¾” BSP (M) x ¾” Compression BF31721 ¾” BSP (M) x ½” Compression BF31723 ¾” BSP (M) x 1” Compression BF3173 1” BSP (M) x 1” Compression BF31732 1” BSP (M) x ¾” Compression BF3181 1/2" Compression BF3182 ¾” Compression BF3183 1" Compression BF320222 ¾” BSP (M) x ¾” Compression x ¾” Compression BF320333 1” BSP (M) x 1” Compression x 1” Compression BF318112 1/2" Compression x 1/2" Compression x ¾” Compression BF318211 ¾” Compression x 1/2" Compression x 1/2" Compression BF318212 ¾” Compression x 1/2" Compression x ¾” Compression BF318221 ¾” Compression x ¾” Compression x 1/2" Compression BF318223 ¾” Compression x ¾” Compression x 1" Compression BF318311 1" Compression x 1/2" Compression x 1/2" Compression BF318313 1" Compression x ½” Compression x 1" Compression BF318322 1" Compression x ¾” Compression x ¾” Compression BF318323 1" Compression x ¾” Compression x 1" Compression BF318331 1" Compression x 1" Compression x 1/2" Compression BF318332 1" Compression x 1" Compression x ¾” Compression BF3301 ½” Compression x ½” Compression x ½” BSP (F) BF3302 ¾” Compression x ¾” Compression x ¾” BSP (F) BF330221 ¾” Compression x ¾” Compression x ½” BSP (F) BF3303 1” Compression x 1” Compression x 1” BSP (F) BF330331 1” Compression x 1” Compression x ½” BSP (F) BF330332 1” Compression x 1” Compression x ¾” BSP (F) BF3402 ¾” BSP (M) x F COMPRESSION BF3403 1” BSP (M) x F COMPRESSION BF3211 ½” Compression x ½” BSP (F) BF3212 ¾” Compression x ¾” BSP (F) BF 32112 ¾” Compression x ½” BSP (F) BF3501 ½” Compression BF3502 ¾” Compression BF3503 1” Compression BF3511 ½” Compression BF3512 ¾” Compression BF3513 1" Compression

Approval Holder:

South Coast Sales

Company Name

South Coast Sales

Address

1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.

Postcode

T12 TR62

Country

Ireland

Phone

00353 21 - 43 46 143

General Email

info@southcoastsales.com

View All Listings by this Company

‘CFxx’ range of brass or DZR brass compression fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: CF15 and CF16 models: 65°C. All other models: 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250915003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Valtech and size on compression nut or body (CF19 and CF20 models only). CR on body of DZR brass fittings.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

CF01 STRAIGHT COUPLINGS: 8mm*8mm, 10mm*10mm, 12mm*12mm, 15mm*15mm, 22mm*22mm, 28mm*28mm, 35mm*35mm, 42mm*42mm, 54mm*54mm. CF01L Repair Coupling: 15mm*15mm*82mm, 22mm*22mm*82mm. CF02 ELBOWS: 8mm*8mm, 10mm*10mm, 12mm*12mm, 15mm*15mm, 22mm*22mm, 28mm*28mm, 35mm*35mm, 42mm*42mm, 54mm*54mm. CF03 REDUCING COUPLING: 10mm*8mm, 12mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 16mm*15mm, 22mm*15mm, 22mm*18mm, 28mm*15mm, 28mm*22mm, 35mm*22mm, 35mm*28mm. CF04 REDUCING ELBOWS: 10mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 18mm*15mm, 22mm*15mm, 22mm*18mm, 28mm*15mm, 28mm*22mm. CF05 STRAIGHT CONN BSP FI: 8mm*1/4" BSP (F), 8mm*3/8" BSP (F), 10mm*1/4" BSP (F), 10mm*3/8" BSP (F), 10mm*1/2" BSP (F), 12mm*1/4" BSP (F), 12mm*3/8" BSP (F), 12mm*1/2" BSP (F), 15mm*1/4" BSP (F), 15mm*3/8" BSP (F), 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 15mm*1" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F), 22mm*1" BSP (F), 28mm*3/4" BSP (F), 28mm*1" BSP (F), 35mm*1 1/4" BSP (F), 42mm*1 1/2" BSP (F), 54mm*2" BSP (F). CF06 ELBOWS BSP FI: 8mm*1/4" BSP (F) , 10mm*1/4" BSP (F), 10mm*3/8" BSP (F), 10mm*1/2" BSP (F), 12mm*3/8" BSP (F), 12mm*1/2" BSP (F), 15mm*3/8" BSP (F), 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F), 22mm*1" BSP (F), 28mm*1" BSP (F), 35mm*1 1/4" BSP (F), 42mm*1 1/2" BSP (F), 54mm*2" BSP (F). CF07 STRAIGHT CONN BSP MI: 8mm*1/8" BSP (M), 8mm*1/4" BSP (M), 8mm*3/8" BSP (M), 8mm*1/2" BSP (M), 10mm*1/4" BSP (M), 10mm*3/8" BSP (M), 10mm*1/2" BSP (M), 12mm*1/4" BSP (M), 12mm*3/8" BSP (M), 12mm*1/2" BSP (M), 15mm*1/4" BSP (M), 15mm*3/8" BSP (M), 15mm*1/2" BSP (M), 15mm*3/4" BSP (M), 18mm*1/2" BSP (M), 18mm*3/4" BSP (M), 22mm*1/2" BSP (M), 22mm*3/4" BSP (M), 22mm*1" BSP (M), 22mm*1 1/4" BSP (M), 28mm*3/4" BSP (M), 28mm*1" BSP (M), 28mm*1 1/4" BSP (M), 35mm*1 1/4" BSP (M), 35mm*1 1/2" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF08 ELBOWS BSP MI: 8mm*1/4" BSP (M), 8mm*1/2" BSP (M), 10mm*1/4" BSP (M), 10mm*3/8" BSP (M), 10mm*1/2" BSP (M), 12mm*1/4" BSP (M), 12mm*3/8" BSP (M), 12mm*1/2" BSP (M), 15mm*1/4" BSP (M), 15mm*3/8" BSP (M), 15mm*1/2" BSP (M), 15mm*3/4" BSP (M), 22mm*1/2" BSP (M), 22mm*3/4" BSP (M), 22mm*1" BSP (M), 28mm*1" BSP (M), 35mm*1 1/4" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF10 WALL PLATE ELBOW: 15mm*1/2" BSP (F), 22mm*1/2" BSP (F), 22mm*3/4" BSP (F). CF11 EQUAL TEE: 8mm*8mm*8mm, 10mm*10mm*10mm, 12mm*12mm*12mm, 15mm*15mm*15mm, 22mm*22mm*22mm, 28mm*28mm*28mm, 35mm*35mm*35mm, 42mm*42mm*42mm, 54mm*54mm*54mm. CF12 REDUCING TEE: 15mm*15mm*22mm, 22mm*15mm*15mm, 22mm*15mm*22mm, 22mm*22mm*15mm, 22mm*22mm*18mm, 28mm*22mm*15mm, 28mm*15mm*15mm, 28mm*28mm*15mm, 28mm*15mm*28mm, 28mm*22mm*22mm, 22mm*22mm*28mm, 28mm*28mm*22mm, 28mm*22mm*28mm, 35mm*35mm*15mm, 35mm*35mm*22mm, 35mm*35mm*28mm, 42mm*42mm*15mm, 42mm*42mm*22mm, 42mm*42mm*28mm, 42mm*42mm*35mm, 54mm*54mm*15mm, 54mm*54mm*22mm, 54mm*54mm*28mm, 54mm*54mm*35mm, 54mm*54mm*42mm. CF13 BSP (F)TEE CXCXFI: 10mm*10mm*3/8" BSP (F), 12mm*12mm*3/8" BSP (F), 12mm*12mm*1/2" BSP (F), 15mm*15mm*1/4" BSP (F), 15mm*15mm*1/2" BSP (F), 18mm*18mm*3/4" BSP (F), 22mm*22mm*1/2" BSP (F), 22mm*22mm*3/4" BSP (F), 28mm*28mm*1/2" BSP (F), 28mm*28mm*3/4" BSP (F), 28mm*28mm*1" BSP (F). CF14 STOP ENDS: 8mm, 10mm, 12mm, 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm. CF15 STRAIGHT TAP CON: 15mm*1/2" BSP (F), 15mm*3/4" BSP (F), 22mm*3/4" BSP (F). CF16 BENT TAP CONN: 15mm*1/2" BSP (F), 22mm*3/4" BSP (F). CF17 TANK CONNECTORS: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. CF19 Reducing Set: 10mm*8mm, 12mm*8mm, 12mm*10mm, 15mm*8mm, 15mm*10mm, 15mm*12mm, 22mm*15mm, 28mm*15mm, 28mm*22mm, 35mm*15mm, 35mm*22mm, 35mm*28mm, 42mm*15mm, 42mm*22mm, 42mm*28mm, 42mm*35mm, 54mm*15mm, 54mm*22mm, 54mm*28mm, 54mm*35mm, 54mm*42mm. CF20 RED SET ONE PT: 15mm*8mm, 15mm*10mm, 15mm*12mm, 22mm*15mm, 28mm*15mm, 28mm*22mm. CF22 Water Tank Connector: 15mm*1/2" BSP (M), 22mm*3/4" BSP (M), 28mm*1" BSP (M), 35mm*1 1/4" BSP (M), 42mm*1 1/2" BSP (M), 54mm*2" BSP (M). CF23 45 degree elbow: 15mm*15mm, 22mm*22mm, 28mm*28mm. CF24 CROSS: 15mm*15mm*15mm*15mm, 22mm*22mm*22mm*22mm.

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Room 610 New Oriental Times Building No. 1130 Biaizhang East Road Ningbo Zhejiang

Country

China

Phone

+86 0574 88001556

View All Listings by this Company

Manufacturer:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Room 6‐25, 6‐26, New Oriental Time Building, 1130 Baizhang Road, Ningbo, Zhejiang

Country

China

View All Listings by this Company

Range of compression fittings with polypropylene bodies for use with PE100 pipe (manufactured to EN 12201). Some of the female adaptors (55920-9-L, 55920-10-L, 55920-11-L & 55920-11-M), female threaded elbows (56935-10-L, 56935-11-L & 56935-11-M) have a maximum working pressure of 10.0 bar. All other models have a maximum working pressure of 16.0 bar. For above and below ground, cold water use.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250902025

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

20mm – 110mm. (please note: 20mm-50mm sizes added January 2026).

Marking:

Plastica Alpha logo, size and date of manufacture (MM/YY) on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Blu Line Plus: 53910-8 Coupling ø63 mm 53910-9 Coupling ø75 mm 53910-10 Coupling ø90 mm 53910-11 Coupling ø110 mm 53915-8 Repair Coupling ø63 mm 53915-9 Repair Coupling ø75 mm 53915-10 Repair Coupling ø90 mm 53915-11 Repair Coupling ø110 mm 53920-8-3 Reducing coupling ø63 - 25 53920-8-4 Reducing coupling ø63 - 32 53920-8-6 Reducing coupling ø63 - 40 53920-8-7 Reducing coupling ø63 - 50 53920-9-6 Reducing coupling ø75 - 40 53920-9-7 Reducing coupling ø75 - 50 53920-9-8 Reducing coupling ø75 - 63 53920-10-8 Reducing coupling ø90 - 63 53920-10-9 Reducing coupling ø90 - 75 53920-11-8 Reducing coupling ø110 - 63 53920-11-9 Reducing coupling ø110 - 75 53920-11-10 Reducing coupling ø110 - 90 55910-8-F Male adaptor ø63 x 1”½ 55910-8-G Male adaptor ø63 x 2” 55910-8-H Male adaptor ø63 x 2”½ 55910-9-G Male adaptor ø75 x 2” 55910-9-H Male adaptor ø75 x 2”½ 55910-9-L Male adaptor ø75 x 3” 55910-10-G Male adaptor ø90 x 2” 55910-10-H Male adaptor ø90 x 2”½ 55910-10-L Male adaptor ø90 x 3” 55910-10-M Male adaptor ø90 x 4” 55910-11-L Male adaptor ø110 x 3” 55910-11-M Male adaptor ø110 x 4” 55920-8-F Female adaptor ø63 x 1” ½ 55920-8-G Female adaptor ø63 x 2” 55920-9-G Female adaptor ø75 x 2” 55920-9-H Female adaptor ø75 x 2” ½ 55920-9-L Female adaptor ø75 x 3” 55920-10-L Female adaptor ø90 x 3” 55920-11-L Female adaptor ø110 x 3” 55920-11-M Female adaptor ø110 x 4” 56950-8 90° elbow ø63 mm 56950-9 90° elbow ø75 mm 56950-10 90° elbow ø90 mm 56950-11 90° elbow ø110 mm 56925-8-F 90° male threaded elbow ø63 x 1” ½ 56925-8-G 90° male threaded elbow ø63 x 2” 56925-8-H 90° male threaded elbow ø63 x 2” ½ 56925-9-G 90° male threaded elbow ø75 x 2” 56925-9-H 90° male threaded elbow ø75 x 2” ½ 56925-10-L 0° male threaded elbow ø90 x 3” 56925-10-M 90° male threaded elbow ø90 x 4” 56925-11-M 90° male threaded elbow ø110 x 4” 56935-8-G 90° female threaded elbow ø63 x 2” 56935-9-G 90° female threaded elbow ø75 x 2” 56935-9-H 90° female threaded elbow ø75 x 2” ½ 56935-10-H 90° female threaded elbow ø90 x 2” ½ 56935-10-L 90° female threaded elbow ø90 x 3” 56935-11-L 90° female threaded elbow ø110 x 3” 56935-11-M 90° female threaded elbow ø110 x 4” 54910-8 90° tee ø63 mm 54910-9 90° tee ø75 mm 54910-10 90° tee ø90 mm 54910-11 90° tee ø110 mm 54920-9-8 90° reducing tee ø54920-9-8 54920-10-9 90° reducing tee ø54920-10-9 54920-11-8 90° reducing tee ø54920-11-8 54920-11-9 90° reducing tee ø54920-11-9 54920-11-10 90° reducing tee ø54920-11-10 54930-8-G 90° male threaded tee ø63 x 2” 54930-8-H 90° male threaded tee ø63 x 2”½ 54930-9-G 90° male threaded tee ø75 x 2” 54930-10-L 90° male threaded tee ø90 x 3” 54930-10-M 90° male threaded tee ø90 x 4” 54930-11-L 90° male threaded tee ø110 x 3” 54930-11-M 90° male threaded tee ø110 x 4” 54940-7-G 90° female threaded tee ø63 x 2” 54940-8-G 90° female threaded tee ø63 x 2”½ 54940-9-G 90° female threaded tee ø75 x 2” 54940-10-L 90° female threaded tee ø90 x 3” 54940-10-M 90° female threaded tee ø90 x 4” 54940-11-L 90° female threaded tee ø110 x 3” 54940-11-M 90° female threaded tee ø110 x 4” 56941-8 End cap ø63 mm 56941-9 End cap ø75 mm 56941-10 End cap ø90 mm 56941-11 End cap ø110 mm 55930-8-G Flanged adaptor ø63 x 2” 55930-9-H Flanged adaptor ø75 x 2”½ 55930-9-L Flanged adaptor ø75 x 3” 55930-10-L Flanged adaptor ø90 x 3” 55930-10-M Flanged adaptor ø90 x 4” 55930-11-M Flanged adaptor ø110 x 4” 56980-8-G 90° Flanged Elbow ø63 x 2” 56980-9-H 90° Flanged Elbow ø75 x 2”½ 56980-9-L 90° Flanged Elbow ø75 x 3” 56980-10-L 90° Flanged Elbow ø90 x 3” 56980-10-M 90° Flanged Elbow ø90 x 4” 56980-11-M 90° Flanged Elbow ø110 x 4” 54930-8-G 90° Flanged Tee ø63 x 2” 54930-9-H 90° Flanged Tee ø75 x 2”½ 54930-9-L 90° Flanged Tee ø75 x 3” 54930-10-L 90° Flanged Tee ø90 x 3” 54930-10-M 90° Flanged Tee ø90 x 4” 54930-11-M 90° Flanged Tee ø110 x 4” Models added January 2026: 53910-2 Coupling ø20 mm 53910-3 Coupling ø25 mm 53910-4 Coupling ø32 mm 53910-6 Coupling ø40 mm 53910-7 Coupling ø50 mm 53915-2 Repair Coupling ø20 mm 53915-3 Repair Coupling ø25 mm 53915-4 Repair Coupling ø32 mm 53915-6 Repair Coupling ø40 mm 53915-7 Repair Coupling ø50 mm 53920-3-2 Reducing coupling ø25 - 20 53920-4-2 Reducing coupling ø32 - 20 53920-4-3 Reducing coupling ø32 - 25 53920-6-4 Reducing coupling ø40 - 32 53920-7-4 Reducing coupling ø50 - 32 53920-7-6 Reducing coupling ø50 - 40 55910-2-B Male adaptor ø20 x ½” 55910-2-C Male adaptor ø20 x ¾” 55910-3-B Male adaptor ø25 x ½” 55910-3-C Male adaptor ø25 x ¾” 55910-3-D Male adaptor ø25 x 1” 55910-4-B Male adaptor ø32 x ½” 55910-4-C Male adaptor ø32 x ¾” 55910-4-D Male adaptor ø32 x 1” 55910-4-E Male adaptor ø32 x 1”¼ 55910-6-D Male adaptor ø40 x 1” 55910-6-E Male adaptor ø40 x 1”¼ 55910-6-F Male adaptor ø40 x 1”½ 55910-7-F Male adaptor ø50 x 1”½ 55910-7-G Male adaptor ø50 x 2” 55920-2-B Female adaptor ø20 x ½” 55920-2-C Female adaptor ø20 x ¾” 55920-3-B Female adaptor ø25 x ½” 55920-3-C Female adaptor ø25 x ¾” 55920-3-D Female adaptor ø25 x 1” 55920-4-C Female adaptor ø32 x ¾” 55920-4-D Female adaptor ø32 x 1” 55920-6-D Female adaptor ø40 x 1” 55920-6-E Female adaptor ø40 x 1” ¼ 55920-6-F Female adaptor ø40 x 1” ½ 55920-7-F Female adaptor ø50 x 1” ½ 55920-7-G Female adaptor ø50 x 2” 56950-2 90° elbow ø20 mm 56950-3 90° elbow ø25 mm 56950-4 90° elbow ø32 mm 56950-6 90° elbow ø40 mm 56950-7 90° elbow ø50 mm 56925-2-B 90° male threaded elbow ø20 x ½” 56925-2-C 90° male threaded elbow ø20 x ¾” 56925-3-B 90° male threaded elbow ø25 x ½” 56925-3-C 90° male threaded elbow ø25 x ¾” 56925-3-D 90° male threaded elbow ø25 x 1” 56925-4-C 90° male threaded elbow ø32 x ¾” 56925-4-D 90° male threaded elbow ø32 x 1” 56925-4-E 90° male threaded elbow ø32 x 1” ¼ 56925-6-D 90° male threaded elbow ø40 x 1” 56925-6-E 90° male threaded elbow ø40 x 1” ¼ 56925-6-F 90° male threaded elbow ø40 x 1” ½ 56925-6-G 90° male threaded elbow ø40 x 2” 56925-7-E 90° male threaded elbow ø50 x 1” ¼ 56925-7-F 90° male threaded elbow ø50 x 1” ½ 56925-7-G 90° male threaded elbow ø50 x 2” 56935-2-B 90° female threaded elbow ø20 x ½” 56935-2-C 90° female threaded elbow ø20 x ¾” 56935-3-B 90° female threaded elbow ø25 x ½” 56935-3-C 90° female threaded elbow ø25 x ¾” 56935-3-D 90° female threaded elbow ø25 x 1” 56935-4-C 90° female threaded elbow ø32 x ¾” 56935-4-D 90° female threaded elbow ø32 x 1” 56935-6-D 90° female threaded elbow ø40 x 1” 56935-6-E 90° female threaded elbow ø40 x 1” ¼ 56935-7-F 90° female threaded elbow ø50 x 1” ½ 56935-7-G 90° female threaded elbow ø50 x 2” 56965-2-B 90° wall plate elbow ø20 x ½” 56965-3-B 90° wall plate elbow ø25 x ½” 56965-3-C 90° wall plate elbow ø25 x ¾” 56965-4-D 90° wall plate elbow ø32 x 1” 54910-2 90° tee ø20 mm 54910-3 90° tee ø25 mm 54910-4 90° tee ø32 mm 54910-6 90° tee ø40 mm 54910-7 90° tee ø50 mm 54920-2-3 90° reducing tee ø54920-2-3 54920-3-2 90° reducing tee ø54920-3-2 54920-4-2 90° reducing tee ø54920-4-2 54920-4-3 90° reducing tee ø54920-4-3 54920-6-3 90° reducing tee ø54920-6-3 54920-6-4 90° reducing tee ø54920-6-4 54920-7-3 90° reducing tee ø54920-7-3 54920-7-4 90° reducing tee ø54920-7-4 54920-7-6 90° reducing tee ø54920-7-6 54920-8-3 90° reducing tee ø54920-8-3 54920-8-4 90° reducing tee ø54920-8-4 54920-8-6 90° reducing tee ø54920-8-6 54920-8-7 90° reducing tee ø54920-8-7 54930-1-C 90° male threaded tee ø16 x ¾” 54930-2-B 90° male threaded tee ø20 x ½” 54930-2-C 90° male threaded tee ø20 x ¾” 54930-3-B 90° male threaded tee ø25 x ½” 54930-3-C 90° male threaded tee ø25 x ¾” 54930-3-D 90° male threaded tee ø25 x 1” 54930-4-C 90° male threaded tee ø32 x ¾” 54930-4-D 90° male threaded tee ø32 x 1” 54930-6-D 90° male threaded tee ø40 x 1” 54930-6-E 90° male threaded tee ø40 x 1”¼ 54930-6-F 90° male threaded tee ø40 x 1”½ 54930-7-F 90° male threaded tee ø50 x 1”½ 54930-7-G 90° male threaded tee ø50 x 2” 54940-2-B 90° female threaded tee ø20 x ½” 54940-2-C 90° female threaded tee ø20 x ¾” 54940-3-B 90° female threaded tee ø25 x ½” 54940-3-C 90° female threaded tee ø25 x ¾” 54940-3-D 90° female threaded tee ø25 x 1” 54940-4-C 90° female threaded tee ø32 x ¾” 54940-4-D 90° female threaded tee ø32 x 1” 54940-6-D 90° female threaded tee ø40 x 1” 54940-6-E 90° female threaded tee ø40 x 1”¼ 54940-6-F 90° female threaded tee ø40 x 1”½ 54940-7-E 90° female threaded tee ø50 x 1”½ 54940-7-F 90° female threaded tee ø50 x 2” 56941-2 End cap ø20 mm 56941-3 End cap ø25 mm 56941-4 End cap ø32 mm 56941-6 End cap ø40 mm 56941-7 End cap ø50 mm 55930-7-G Flanged adaptor ø50 x 2” 56980-7-F 90° Flanged Elbow ø50 x1”½ 56980-7-G 90° Flanged Elbow ø50 x 2” 54980-7-F 90° Flanged Tee ø50 x1”½ 54930-7-G 90° Flanged Tee ø50 x 2”

Manufacturer:

Plastica Alfa S.p.a.

Company Name

Plastica Alfa S.p.a.

Address

C.da S.M. Poggiarelli, Z.I., 95041 Caltagirone (CT), Italy

View All Listings by this Company

"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404724

Size:

Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:

Hevac Ltd

Company Name

Hevac Ltd

Address

Muirfield Drive Naas Road Dublin 12

Postcode

D12 X0A3

Country

Ireland

Phone

0035 314 191924

General Email

dave.grenville@hevac.ie

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of stainless-steel press fittings (SUS304 or 316L) with EPDM ‘O’-rings for use with stainless-steel pipe (SUS304 or 316L EN 10312), using an ‘M’ press profile. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004054

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODEL

Marking:

KPress logo, material and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

HB-H15XXX - 45 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I15XXX - 45 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H16XXX - 45 Degree Plain End Elbow - SUS304 - 28, 35, 42, 54. HB-I16XXX - 45 Degree Plain End Elbow - SUS316L - 28, 35, 42, 54. HB-H07XXX - 90 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I07XXX - 90 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H08XXX - 90 Degree Female Thread Elbow - SUS304 - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-I08XXX - 90 Degree Female Thread Elbow - SUS316L - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-H09XXX - 90 Degree Male Thread Elbow - SUS304 - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-I09XXX - 90 Degree Male Thread Elbow - SUS316L - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-H14XXX - 90 Degree Plain End Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I14XXX - 90 Degree Plain End Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H18XXX - Cap - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I18XXX - Cap - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H01XXX - Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I01XXX - Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H03XXX - Male Thread Adapter - SUS304 - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-I03XXX - Male Thread Adapter - SUS316L - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-H24XXX - Plain End Coupling - SUS304 - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-I24XXX - Plain end Coupling - SUS316L - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-H02XXX - Reducing Coupling - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I02XXX - Reducing Coupling - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H13XXX - Reducing Cross - SUS304 - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-I13XXX - Reducing Cross - SUS316L - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-H06XXX - Reducing Tee - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I06XXX - Reducing Tee - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H19XXX - Slip Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I19XXX - Slip Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H11XXX - Tee with male Thread - SUS304 - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-I11XXX - Tee with male Thread - SUS316L - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-H20XXX - Union Adapter - SUS304 - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-I20XXX - Union Adapter - SUS316L - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-H05XXX - Equal Tee - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I05XXX - Equal Tee - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H12XXX - Equal Cross - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I12XXX - Equal Cross - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H10XXX - Tee with Female Thread - SUS304 - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-I10XXX - Tee with Female Thread - SUS316L - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-H00XXX - Stainless Steel Pipe - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I00XXX - Stainless Steel Pipe - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108.

Approval Holder:

Kesanitar GmbH

Company Name

Kesanitar GmbH

Address

Märkische Straße 12, 47809 Krefeld, NRW

Country

Germany

Phone

+49 2151 3624071

General Email

info@kesanitar.com

View All Listings by this Company

‘F17’ range of brass press fittings with EPDM ‘O’-rings for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved via a crimping tool using either a ‘U’, ‘TH’ or ‘H’ profile. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251115001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Equal Straight Union: 16mm - 32mm, Unequal Straight Union: 20mmx16mm - 32mmx26mm, Male Straight Union: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Straight Union: 16mmx⅜” BSP (F) - 32mmx1” BSP (F), Equal Elbows: 16mm - 32mm, Unequal Elbows: 20mmx16mm - 32mmx25mm, Male Elbows: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Elbows: 16mmx⅜ BSP (F) - 32mmx1” BSP (F), Equal Tees: 16mm - 32mm, Unequal Tees: 16mmx20mmx16mm - 32mmx26mmx32mm, Female Tee: 16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F), Male tee: 16mmx16mmx⅜” BSP (M) - 25mmx25mmx¾” BSP (M), Wall-plated female elbow: 16mmx⅜” BSP (F) - 26mmx¾” BSP (F), Demountable female straight union: 16mmx⅜ BSP (F) - 32mmx1” BSP (F), End cap: 16mm - 32mm.

Marking:

RIFENG, size, crimp profile (U-TH-H) and production date (MM/YYYY) on crimp sleeve.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

Equal Straight Union (16mm - 32mm): F17-S1216x1216, F17-S1620x1620, F17-S2025x2025, F17-S2026x2026, F17-S2632x2632. Unequal Straight Union (20mmx16mm - 32mmx26mm): F17-S1620x1216, F17-S2025x1216, F17-S2025x1620, F17-S2026x1216, F17-S2026x1620, F17-S2632x1216, F17-S2632x1620, F17-S2632x2025, F17-S2632x2026. Male Straight Union (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): F17-S1216x3/8, F17-S1216x1/2, F17-S1216x3/4, F17-S1620x1/2, F17-S1620x3/4, F17-S1620x1, F17-S2025x3/4, F17-S2025x1, F17-S2026x3/4, F17-S2026x1, F17-S2632x1. Female Straight Union (16mmx⅜” BSP (F) - 32mmx1” BSP (F)): F17-S1216x3/8F, F17-S1216x1/2F, F17-S1216x3/4F, F17-S1620x1/2F, F17-S1620x3/4F, F17-S1620x1F, F17-S2025x3/4F, F17-S2025x1F, F17-S2026x3/4F, F17-S2026x1F, F17-S2632x1F. Equal Elbows (16mm - 32mm): F17-L1216x1216, F17-L1620x1620, F17-L2025x2025, F17-L2026x2026, F17-L2632x2632. Unequal Elbows (20mmx16mm - 32mmx25mm): F17-L1620*1216, F17-L2025*1216, F17-L2025*1620, F17-L2632*2025. Male Elbows (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): F17-L1216x3/8, F17-L1216x1/2, F17-L1216x3/4, F17-L1620x1/2, F17-L1620x3/4, F17-L1620x1, F17-L2025x3/4, F17-L2025x1, F17-L2026x3/4, F17-L2026x1, F17-L2632x1. Female Elbows (16mmx⅜ BSP (F) - 32mmx1” BSP (F)): F17-L1216x3/8F, F17-L1216x1/2F, F17-L1216x3/4F, F17-L1620x1/2F, F17-L1620x3/4F, F17-L2025x3/4F, F17-L2026x3/4F, F17-L2025x1F, F17-L2632x1F. Equal Tees (16mm - 32mm): F17-T1216x1216x1216, F17-T1620x1620x1620, F17-T2025x2025x2025, F17-T2026x2026x2026, F17-T2632x2632x2632. Unequal Tees (16mmx20mmx16mm - 32mmx26mmx32mm): F17-T1216x1620x1216, F17-T1216x2025x1216, F17-T1620x1216x1216, F17-T2025x1216x1216, F17-T2026x1216x1216, F17-T2026x1216x1620, F17-T1620x1216x1620, F17-T1620x1620x1216, F17-T1620x2025x1620, F17-T1620x2026x1620, F17-T2025x1216x2025, F17-T2025x1620x1620, F17-T2025x2025x1620, F17-T2025x1620x2025, F17-T2026x1216x2026, F17-T2026x1620x1620, F17-T2026x1620x2026, F17-T2026x2026x1620, F17-T2632x1216x2632, F17-T2632x1620x2632, F17-T2632x2026x2026, F17-T2632x2025x2632, F17-T2632x2026x2632. Female Tee (16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F)): F17-T1216x3/8Fx1216, F17-T1216x1/2Fx1216, F17-T1620x1/2Fx1620, F17-T1620x3/4Fx1620, F17-T2025x1/2Fx2025, F17-T2025x3/4Fx2025, F17-T2026x1/2Fx2026, F17-T2026x3/4Fx2026, F17-T2632x3/4Fx2632, F17-T2632x1Fx2632. Male tee (16mmx16mmx⅜” BSP (M) - 25mmx25mmx¾” BSP (M)): F17-T1216x3/8x1216, F17-T1216x1/2x1216, F17-T1620x1/2x1620, F17-T1620x3/4x1620, F17-T2025x1/2x2025, F17-T2025x3/4x2025. Wall-plated female elbow (16mmx⅜” BSP (F) - 26mmx¾” BSP (F)): F17-L1216x3/8F (Z), F17-L1216x1/2F (Z), F17-L1620x1/2F (Z), F17-L1620x3/4F (Z), F17-L2025x3/4F (Z), F17-L2026x3/4F (Z). Demountable female straight union (16mmx⅜ BSP (F) - 32mmx1” BSP (F)): F17-S1216x3/8F (H), F17-S1216x1/2F (H), F17-S1216x3/4F (H), F17-S1620x1/2F (H), F17-S1620x3/4F (H), F17-S2025x3/4F (H), F17-S2026x3/4F (H), F17-S2632x1F (H). End cap (16mm - 32mm): F17-D1216, F17-D1620, F17-D2025, F17-D2026, F17-D2632.

Approval Holder:

Rifeng Enterprise (Foshan) Co., Ltd.

Company Name

Rifeng Enterprise (Foshan) Co., Ltd.

Address

F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province

Postcode

528318

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

Manufacturer:

Rifeng Enterprise (Foshan) Co., Ltd.

Company Name

Rifeng Enterprise (Foshan) Co., Ltd.

Address

F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province

Postcode

528318

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

'PlumbRight' range of push-fit fittings with PEX-b, polysulphone or PPE bodies, supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part 2) and copper pipe (EN1057). Maximum working pressure 12.5 bar @ 20°C. As of October 2025: Maximum working pressure/temperature 3 Bar @ 92°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250602052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm, 15mm, 22mm, 28mm

Marking:

TLC (TwistLoc logo) and size on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

'PlumbRight' range comprising of models: SRDE6764M 15mmX1/2"BSP DROP EAR ELBOW SRF6764M 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M 28mmX1"BSP FEMALE ADAPTOR SPU6711M 10mm STR UNION SPU6766M 15mm STR UNION SPU6744M 22mm STR UNION SPU6700M 28mm STR UNION SPU6761M 15mmX10mm REDUCING STR UNION SPU6746M 22mmX15mm REDUCING STR UNION SRSE6714M 10mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6764M 15mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6765M 15mmX3/4"BSP SWIVEL ELBOW (Hand Tighten) SRSE6714BM 10mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6764BM 15mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6765BM 15mmX3/4"BSP SWIVEL ELBOW (Brass Nut) SPSU6714M 10mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6764M 15mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6765M 15mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6745M 22mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6714BM 10mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6764BM 15mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6765BM 15mmX3/4"BSP SWIVEL UNION (Brass Nut) SPSU6745BM 22mmX3/4"BSP SWIVEL UNION (Brass Nut) SPST671M 10mm END STOP SPST676M 15mm END STOP SPST674M 22mm END STOP SRST670M 28mm END STOP SPE6711M 10mm ELBOW SPE6766M 15mm ELBOW SPE6744M 22mm ELBOW SPE6700M 28mm ELBOW SPE6761M 15mmX10mm REDUCING ELBOW SPE6746M 22mmX15mm REDUCING ELBOW SPATE6766M 15mm-135o STEM ELBOW SPATE6744M 22mm-135o STEM ELBOW SPR6716M 10mmX15mm REDUCER SPR6764M 15mmX22mm REDUCER SPR6760M 15mmX28mm REDUCER SPR6740M 22mmX28mm REDUCER SPT67111M 10mm TEE SPT67666M 15mm TEE SPT67444M 22mm TEE SPT67000M 28mm TEE SPT67611M 15mmX10mmX10mm REDUCING TEE SPT67661M 15mmX15mmX10mm REDUCING TEE SPT67664M 15mmX15mmX22mm REDUCING TEE SPT67466M 22mmX15mmX15mm REDUCING TEE SPT67464M 22mmx15mmx22mm REDUCING TEE SPT67441M 22mmx22mmx10mm REDUCING TEE SPT67446M 22mmX22mmX15mm REDUCING TEE SPT67044M 28mmX22mmX22mm REDUCING TEE SPT67040M 28mmX22mmX28mm REDUCING TEE SPT67001M 28mmX28mmX10mm REDUCING TEE SPT67006M 28mmX28mmX15mm REDUCING TEE SPT67004M 28mmX28mmX22mm REDUCING TEE SPTT67441M 22mX22mmX10mm TUBE TEE SPTT67446M 22mX22mmX15mm TUBE TEE SPTE6711M 10mm TUBE ELBOW SPTE6716M 10mmx15mm TUBE ELBOW SPTE6766M 15mm TUBE ELBOW SPTE6744M 22mm TUBE ELBOW SRMC6764M 15mmX1/2"BSPT MALE CONNECTOR SRME6764M 15mmX1/2"BSPT MALE ELBOW SRFWC6741M 22mmX10mm 4WAY MANIFOLD SRU6766SM 15mm SLIP UNION SRU6744SM 22mm SLIP UNION STS10M 10mm PIPE INSERT STS15M 15mm PIPE INSERT STS22M 22mm PIPE INSERT STS28M 28mm PIPE INSERT SRAV63M 15mm AIR-VENT CONNECTOR

Approval Holder:

City Plumbing

Company Name

City Plumbing

Address

Highbourne House, 1 Eldon Way, Crick, Northamptonshire

Postcode

NN6 7SL

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company

“D-“ and “E-“ range of 304 and 316L stainless steel press fittings, in either ‘M’ press profile (D- prefix models) or ‘V’ press profile (E- prefix models) for use with stainless steel pipe (316L & 304 manufactured to EN10312). For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature: 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250912029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Company logo “WEGS”, size, material SUS304 or SUS316L on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

D-DN10 - 90° Equal Elbow: 15mm, D-DN15 - 90° Equal Elbow: 18mm, D-DN20 - 90° Equal Elbow: 22mm, D-DN25 - 90° Equal Elbow: 28mm, D-DN32 - 90° Equal Elbow: 35mm, D-DN40 - 90° Equal Elbow: 42mm, D-DN50 - 90° Equal Elbow: 54mm, D-DN10 - 90° B-type equal elbow: 15mm, D-DN15 - 91° B-type equal elbow: 18mm, D-DN20 - 92° B-type equal elbow: 22mm, D-DN25 - 93° B-type equal elbow: 28mm, D-DN32 - 94° B-type equal elbow: 35mm, D-DN40 - 95° B-type equal elbow: 42mm, D-DN50 - 96° B-type equal elbow: 54mm, D-DN15×10 - 90° Reducing Elbow: 15×18mm, D-DN20×15 - 91° Reducing Elbow: 22×18mm, D-DN25×15 - 92° Reducing Elbow: 28×18mm, D-DN25×20 - 93° Reducing Elbow: 28×22mm, D-DN10×½ - 90° Male Elbow: 15mm×½, D-DN10×¾ - 90° Male Elbow: 15mm×¾, D-DN15×½ - 90° Male Elbow: 18mm×½, D-DN15×¾ - 90° Male Elbow: 18mm×¾, D-DN20×¾ - 90° Male Elbow: 22mm×¾, D-DN25×1 - 90° Male Elbow: 28 mm×1, D-DN32×1¼ - 90° Male Elbow: 35mm×1¼, D-DN40×1½ - 90° Male Elbow: 42mm×1½, D-DN50×2 - 90° Male Elbow: 54mm×2, D-DN10×½ - 90° female elbow: 15mm×½, D-DN10×¾ - 90° female elbow: 15mm×¾, D-DN15×½ - 90° female elbow: 18mm×½, D-DN15×¾ - 90° female elbow: 18mm×¾, D-DN20×¾ - 90° female elbow: 22mm×¾, D-DN25×1 - 90° female elbow: 28 mm×1, D-DN32×1¼ - 90° female elbow: 35mm×1¼, D-DN40×1½ - 90° female elbow: 42mm×1½, D-DN50×2 - 90° female elbow: 54 mm×2, D-DN10 - 45° Equal Elbow: 15mm, D-DN15 - 45° Equal Elbow: 18mm, D-DN20 - 45° Equal Elbow: 22mm, D-DN25 - 45° Equal Elbow: 28mm, D-DN32 - 45° Equal Elbow: 35mm, D-DN40 - 45° Equal Elbow: 42mm, D-DN50 - 45° Equal Elbow: 54mm, D-DN10 - 45° B-type equal elbow: 15mm, D-DN15 - 45° B-type equal elbow: 18mm, D-DN20 - 45° B-type equal elbow: 22mm, D-DN25 - 45° B-type equal elbow: 28mm, D-DN32 - 45° B-type equal elbow: 35mm, D-DN40 - 45° B-type equal elbow: 42mm, D-DN50 - 45° B-type equal elbow: 54mm, D-DN10 - Equal tee: 15mm, D-DN15 - Equal tee: 18mm, D-DN20 - Equal tee: 22mm, D-DN25 - Equal tee: 28mm, D-DN32 - Equal tee: 35mm, D-DN40 - Equal tee: 42mm, D-DN50 - Equal tee: 54mm, D-DN15×10 - Reducing Tee: 18×15mm, D-DN20×10 - Reducing Tee: 22×15mm, D-DN20×15 - Reducing Tee: 22×18mm, D-DN25×10 - Reducing Tee: 28×15mm, D-DN25×15 - Reducing Tee: 28×18mm, D-DN25×20 - Reducing Tee: 28×22mm, D-DN32×10 - Reducing Tee: 35×15mm, D-DN32×15 - Reducing Tee: 35×18mm, D-DN32×20 - Reducing Tee: 35×22mm, D-DN32×25 - Reducing Tee: 35×28mm, D-DN40×15 - Reducing Tee: 42×18mm, D-DN40×20 - Reducing Tee: 42×22mm, D-DN40×25 - Reducing Tee: 42×28mm, D-DN40×32 - Reducing Tee: 42×35mm, D-DN50×20 - Reducing Tee: 54×22mm, D-DN50×25 - Reducing Tee: 54×28mm, D-DN50×32 - Reducing Tee: 54×35mm, D-DN50×40 - Reducing Tee: 54×42mm, D-DN10×½ - Short elbow with female: 15mm×½, D-DN10×¾ - Short elbow with female: 15mm×¾, D-DN15×½ - Short elbow with female: 18mm×½, D-DN15×¾ - Short elbow with female: 18mm×¾, D-DN20×¾ - Short elbow with female: 22mm×¾, D-DN25×½ - Short elbow with female: 28mm×½, D-DN25×¾ - Short elbow with female: 28mm×¾, D-DN25×1 - Short elbow with female: 28mm×1, D-DN10×½ - Female Tee: 15mm×½, D-DN10×¾ - Female Tee: 15mm×¾, D-DN15×½ - Female Tee: 18mm×½, D-DN15×¾ - Female Tee: 18mm×¾, D-DN20×½ - Female Tee: 22mm×½, D-DN20×¾ - Female Tee: 22mm×¾, D-DN25×½ - Female Tee: 28mm×½, D-DN25×¾ - Female Tee: 28mm×¾, D-DN25×1 - Female Tee: 28 mm×1, D-DN32×½ - Female Tee: 35mm×½, D-DN32×¾ - Female Tee: 35mm×¾, D-DN32×1¼ - Female Tee: 35mm×1¼, D-DN40×½ - Female Tee: 42mm×½, D-DN40×¾ - Female Tee: 42mm×¾, D-DN40×1¼ - Female Tee: 42mm×1¼, D-DN40×1½ - Female Tee: 42mm×1½, D-DN50×½ - Female Tee: 54mm×½, D-DN50×¾ - Female Tee: 54mm×¾, D-DN50×2 - Female Tee: 54mm×2, D-DN10×½ - Male Tee: 15mm×½, D-DN10×¾ - Male Tee: 15mm×¾, D-DN15×½ - Male Tee: 18mm×½, D-DN15×¾ - Male Tee: 18mm×¾, D-DN20×½ - Male Tee: 22mm×½, D-DN20×¾ - Male Tee: 22mm×¾, D-DN25×½ - Male Tee: 28mm×½, D-DN25×¾ - Male Tee: 28mm×¾, D-DN25×1 - Male Tee: 28 mm×1, D-DN32×½ - Male Tee: 35mm×½, D-DN32×¾ - Male Tee: 35mm×¾, D-DN32×1¼ - Male Tee: 35mm×1¼, D-DN40×½ - Male Tee: 42mm×½, D-DN40×¾ - Male Tee: 42mm×¾, D-DN40×1¼ - Male Tee: 42mm×1¼, D-DN40×1½ - Male Tee: 42mm×1½, D-DN50×½ - Male Tee: 54mm×½, D-DN50×¾ - Male Tee: 54mm×¾, D-DN50×2 - Male Tee: 54 mm×2, D-DN10×½ - Male Adapter: 15mm×½, D-DN10×¾ - Male Adapter: 15mm×¾, D-DN15×½ - Male Adapter: 18mm×½, D-DN15×¾ - Male Adapter: 18mm×¾, D-DN20×½ - Male Adapter: 22mm×½, D-DN20×¾ - Male Adapter: 22mm×¾, D-DN20×1 - Male Adapter: 22mm×1, D-DN25×¾ - Male Adapter: 28mm×¾, D-DN25×1 - Male Adapter: 28mm×1, D-DN32×1 - Male Adapter: 35 mm×1, D-DN32×1¼ - Male Adapter: 35mm×1¼, D-DN40×1½ - Male Adapter: 42mm×1½, D-DN50×2 - Male Adapter: 54 m×2, D-DN10 - Equal coupling: 15mm, D-DN15 - Equal coupling: 18mm, D-DN20 - Equal coupling: 22mm, D-DN25 - Equal coupling: 28mm, D-DN32 - Equal coupling: 35mm, D-DN40 - Equal coupling: 42mm, D-DN50 - Equal coupling: 54mm, D-DN15×10 - Reducing coupling: 18×15mm, D-DN20×10 - Reducing coupling: 22×15mm, D-DN20×15 - Reducing coupling: 22×18mm, D-DN25×10 - Reducing coupling: 28×15mm, D-DN25×15 - Reducing coupling: 28×18mm, D-DN25×20 - Reducing coupling: 28×22mm, D-DN32×15 - Reducing coupling: 35×18mm, D-DN32×20 - Reducing coupling: 35×22mm, D-DN32×25 - Reducing coupling: 35×28mm, D-DN40×15 - Reducing coupling: 42×18mm, D-DN40×20 - Reducing coupling: 42×22mm, D-DN40×25 - Reducing coupling: 42×28mm, D-DN40×32 - Reducing coupling: 42×35mm, D-DN50×15 - Reducing coupling: 54×18mm, D-DN50×20 - Reducing coupling: 54×22mm, D-DN50×25 - Reducing coupling: 54×28mm, D-DN50×32 - Reducing coupling: 54×35mm, D-DN50×40 - Reducing coupling: 54×42mm, D-DN10×½ - Female Adapter: 15mm×½, D-DN10×¾ - Female Adapter: 15mm×¾, D-DN15×½ - Female Adapter: 18mm×½, D-DN15×¾ - Female Adapter: 18mm×¾, D-DN20×½ - Female Adapter: 22mm×½, D-DN20×¾ - Female Adapter: 22mm×¾, D-DN25×½ - Female Adapter: 28mm×½, D-DN25×¾ - Female Adapter: 28mm×¾, D-DN25×1 - Female Adapter: 28mm×1, D-DN32×1¼ - Female Adapter: 35mm×1¼, D-DN40×1½ - Female Adapter: 42mm×1½, D-DN50×2 - Female Adapter: 54mm×2, D-DN10×½ - Moving Female Adapter: 15mm×½, D-DN10×¾ - Moving Female Adapter: 15mm×¾, D-DN15×½ - Moving Female Adapter: 18mm×½, D-DN15×¾ - Moving Female Adapter: 18mm×¾, D-DN20×½ - Moving Female Adapter: 22mm×½, D-DN20×¾ - Moving Female Adapter: 22mm×¾, D-DN25×1 - Moving Female Adapter: 28 mm×1, D-DN32×1¼ - Moving Female Adapter: 35mm×1¼, D-DN40×1½ - Moving Female Adapter: 42mm×1½, D-DN50×2 - Moving Female Adapter: 54 mm×2, D-DN10 - Slip coupling: 15mm, D-DN15 - Slip coupling: 18mm, D-DN20 - Slip coupling: 22mm, D-DN25 - Slip coupling: 28mm, D-DN32 - Slip coupling: 35mm, D-DN40 - Slip coupling: 42mm, D-DN50 - Slip coupling: 54mm, DN10×½ - Hexagonal male connector: 15mm×½, DN10×¾ - Hexagonal male connector: 15mm×¾, DN15×½ - Hexagonal male connector: 18 mm×½, DN20×¾ - Hexagonal male connector: 22 mm×¾, DN25×1 - Hexagonal male connector: 28mm×1, DN32×1¼ - Hexagonal male connector: 35 mm×1¼, DN40×1½ - Hexagonal male connector: 42mm×1½, DN50×2 - Hexagonal male connector: 54mm×2, D-DN10 - Caps: 15mm, D-DN15 - Caps: 18mm, D-DN20 - Caps: 22mm, D-DN25 - Caps: 28mm, D-DN32 - Caps: 35mm, D-DN40 - Caps: 42mm, D-DN50 - Caps: 54mm, DN15 - Straight Tube Fittings: 18mm, DN20 - Straight Tube Fittings: 22mm, DN25 - Straight Tube Fittings: 28mm, DN10 - Layflat bridge: 15mm, DN15 - Layflat bridge: 18mm, DN20 - Layflat bridge: 22mm, DN25 - Layflat bridge: 28mm, D-DN25 - Flange adapters: 28mm, D-DN32 - Flange adapters: 35mm, D-DN40 - Flange adapters: 42mm, D-DN50 - Flange adapters: 54mm.

E-DN10 - 90° Equal Elbow: 15mm, E-DN15 - 90° Equal Elbow: 18mm, E-DN20 - 90° Equal Elbow: 22mm, E-DN25 - 90° Equal Elbow: 28mm, E-DN32 - 90° Equal Elbow: 35mm, E-DN40 - 90° Equal Elbow: 42mm, E-DN50 - 90° Equal Elbow: 54mm, E-DN10 - 90° B-type equal elbow: 15mm, E-DN15 - 90° B-type equal elbow: 18mm, E-DN20 - 90° B-type equal elbow: 22mm, E-DN25 - 90° B-type equal elbow: 28mm, E-DN32 - 90° B-type equal elbow: 35mm, E-DN40 - 90° B-type equal elbow: 42mm, E-DN50 - 90° B-type equal elbow: 54mm, E-DN15×10 - 90° Reducing Elbow: 15×18mm, E-DN20×15 - 90° Reducing Elbow: 22×18mm, E-DN25×15 - 90° Reducing Elbow: 28×18mm, E-DN25×20 - 90° Reducing Elbow: 28×22mm, E-DN10×½ - 90° Male Elbow: 15mm×½, E-DN10×¾ - 90° Male Elbow: 15mm×¾, E-DN15×½ - 90° Male Elbow: 18mm×½, E-DN15×¾ - 90° Male Elbow: 18mm×¾, E-DN20×¾ - 90° Male Elbow: 22mm×¾, E-DN25×1 - 90° Male Elbow: 28 mm×1, E-DN32×1¼ - 90° Male Elbow: 35mm×1¼, E-DN40×1½ - 90° Male Elbow: 42mm×1½, E-DN50×2 - 90° Male Elbow: 54mm×2, E-DN10×½ - 90° female elbow: 15mm×½, E-DN10×¾ - 90° female elbow: 15mm×¾, E-DN15×½ - 90° female elbow: 18mm×½, E-DN15×¾ - 90° female elbow: 18mm×¾, E-DN20×¾ - 90° female elbow: 22mm×¾, E-DN25×1 - 90° female elbow: 28 mm×1, E-DN32×1¼ - 90° female elbow: 35mm×1¼, E-DN40×1½ - 90° female elbow: 42mm×1½, E-DN50×2 - 90° female elbow: 54 mm×2, E-DN10 - 45° Equal Elbow: 15mm, E-DN15 - 45° Equal Elbow: 18mm, E-DN20 - 45° Equal Elbow: 22mm, E-DN25 - 45° Equal Elbow: 28mm, E-DN32 - 45° Equal Elbow: 35mm, E-DN40 - 45° Equal Elbow: 42mm, E-DN50 - 45° Equal Elbow: 54mm, E-DN10 - 45° B-type equal elbow: 15mm, E-DN15 - 45° B-type equal elbow: 18mm, E-DN20 - 45° B-type equal elbow: 22mm, E-DN25 - 45° B-type equal elbow: 28mm, E-DN32 - 45° B-type equal elbow: 35mm, E-DN40 - 45° B-type equal elbow: 42mm, E-DN50 - 45° B-type equal elbow: 54mm, E-DN10 - Equal tee: 15mm, E-DN15 - Equal tee: 18mm, E-DN20 - Equal tee: 22mm, E-DN25 - Equal tee: 28mm, E-DN32 - Equal tee: 35mm, E-DN40 - Equal tee: 42mm, E-DN50 - Equal tee: 54mm, E-DN15×10 - Reducing Tee: 18×15mm, E-DN20×10 - Reducing Tee: 22×15mm, E-DN20×15 - Reducing Tee: 22×18mm, E-DN25×10 - Reducing Tee: 28×15mm, E-DN25×15 - Reducing Tee: 28×18mm, E-DN25×20 - Reducing Tee: 28×22mm, E-DN32×10 - Reducing Tee: 35×15mm, E-DN32×15 - Reducing Tee: 35×18mm, E-DN32×20 - Reducing Tee: 35×22mm, E-DN32×25 - Reducing Tee: 35×28mm, E-DN40×15 - Reducing Tee: 42×18mm, E-DN40×20 - Reducing Tee: 42×22mm, E-DN40×25 - Reducing Tee: 42×28mm, E-DN40×32 - Reducing Tee: 42×35mm, E-DN50×20 - Reducing Tee: 54×22mm, E-DN50×25 - Reducing Tee: 54×28mm, E-DN50×32 - Reducing Tee: 54×35mm, E-DN50×40 - Reducing Tee: 54×42mm, E-DN10×½ - Short elbow with female: 15mm×½, E-DN10×¾ - Short elbow with female: 15mm×¾, E-DN15×½ - Short elbow with female: 18mm×½, E-DN15×¾ - Short elbow with female: 18mm×¾, E-DN20×¾ - Short elbow with female: 22mm×¾, E-DN25×½ - Short elbow with female: 28mm×½, E-DN25×¾ - Short elbow with female: 28mm×¾, E-DN25×1 - Short elbow with female: 28mm×1, E-DN10×½ - Female Tee: 15mm×½, E-DN10×¾ - Female Tee: 15mm×¾, E-DN15×½ - Female Tee: 18mm×½, E-DN15×¾ - Female Tee: 18mm×¾, E-DN20×½ - Female Tee: 22mm×½, E-DN20×¾ - Female Tee: 22mm×¾, E-DN25×½ - Female Tee: 28mm×½, E-DN25×¾ - Female Tee: 28mm×¾, E-DN25×1 - Female Tee: 28 mm×1, E-DN32×½ - Female Tee: 35mm×½, E-DN32×¾ - Female Tee: 35mm×¾, E-DN32×1¼ - Female Tee: 35mm×1¼, E-DN40×½ - Female Tee: 42mm×½, E-DN40×¾ - Female Tee: 42mm×¾, E-DN40×1¼ - Female Tee: 42mm×1¼, E-DN40×1½ - Female Tee: 42mm×1½, E-DN50×½ - Female Tee: 54mm×½, E-DN50×¾ - Female Tee: 54mm×¾, E-DN50×2 - Female Tee: 54mm×2, E-DN10×½ - Male Tee: 15mm×½, E-DN10×¾ - Male Tee: 15mm×¾, E-DN15×½ - Male Tee: 18mm×½, E-DN15×¾ - Male Tee: 18mm×¾, E-DN20×½ - Male Tee: 22mm×½, E-DN20×¾ - Male Tee: 22mm×¾, E-DN25×½ - Male Tee: 28mm×½, E-DN25×¾ - Male Tee: 28mm×¾, E-DN25×1 - Male Tee: 28 mm×1, E-DN32×½ - Male Tee: 35mm×½, E-DN32×¾ - Male Tee: 35mm×¾, E-DN32×1¼ - Male Tee: 35mm×1¼, E-DN40×½ - Male Tee: 42mm×½, E-DN40×¾ - Male Tee: 42mm×¾, E-DN40×1¼ - Male Tee: 42mm×1¼, E-DN40×1½ - Male Tee: 42mm×1½, E-DN50×½ - Male Tee: 54mm×½, E-DN50×¾ - Male Tee: 54mm×¾, E-DN50×2 - Male Tee: 54 mm×2, E-DN10×½ - Male Adapter: 15mm×½, E-DN10×¾ - Male Adapter: 15mm×¾, E-DN15×½ - Male Adapter: 18mm×½, E-DN15×¾ - Male Adapter: 18mm×¾, E-DN20×½ - Male Adapter: 22mm×½, E-DN20×¾ - Male Adapter: 22mm×¾, E-DN20×1 - Male Adapter: 22mm×1, E-DN25×¾ - Male Adapter: 28mm×¾, E-DN25×1 - Male Adapter: 28mm×1, E-DN32×1 - Male Adapter: 35 mm×1, E-DN32×1¼ - Male Adapter: 35mm×1¼, E-DN40×1½ - Male Adapter: 42mm×1½, E-DN50×2 - Male Adapter: 54 m×2, E-DN10 - Equal coupling: 15mm, E-DN15 - Equal coupling: 18mm, E-DN20 - Equal coupling: 22mm, E-DN25 - Equal coupling: 28mm, E-DN32 - Equal coupling: 35mm, E-DN40 - Equal coupling: 42mm, E-DN50 - Equal coupling: 54mm, E-DN15×10 - Reducing coupling: 18×15mm, E-DN20×10 - Reducing coupling: 22×15mm, E-DN20×15 - Reducing coupling: 22×18mm, E-DN25×10 - Reducing coupling: 28×15mm, E-DN25×15 - Reducing coupling: 28×18mm, E-DN25×20 - Reducing coupling: 28×22mm, E-DN32×15 - Reducing coupling: 35×18mm, E-DN32×20 - Reducing coupling: 35×22mm, E-DN32×25 - Reducing coupling: 35×28mm, E-DN40×15 - Reducing coupling: 42×18mm, E-DN40×20 - Reducing coupling: 42×22mm, E-DN40×25 - Reducing coupling: 42×28mm, E-DN40×32 - Reducing coupling: 42×35mm, E-DN50×15 - Reducing coupling: 54×18mm, E-DN50×20 - Reducing coupling: 54×22mm, E-DN50×25 - Reducing coupling: 54×28mm, E-DN50×32 - Reducing coupling: 54×35mm, E-DN50×40 - Reducing coupling: 54×42mm, E-DN10×½ - Female Adapter: 15mm×½, E-DN10×¾ - Female Adapter: 15mm×¾, E-DN15×½ - Female Adapter: 18mm×½, E-DN15×¾ - Female Adapter: 18mm×¾, E-DN20×½ - Female Adapter: 22mm×½, E-DN20×¾ - Female Adapter: 22mm×¾, E-DN25×½ - Female Adapter: 28mm×½, E-DN25×¾ - Female Adapter: 28mm×¾, E-DN25×1 - Female Adapter: 28mm×1, E-DN32×1¼ - Female Adapter: 35mm×1¼, E-DN40×1½ - Female Adapter: 42mm×1½, E-DN50×2 - Female Adapter: 54mm×2, E-DN10×½ - Moving Female Adapter: 15mm×½, E-DN10×¾ - Moving Female Adapter: 15mm×¾, E-DN15×½ - Moving Female Adapter: 18mm×½, E-DN15×¾ - Moving Female Adapter: 18mm×¾, E-DN20×½ - Moving Female Adapter: 22mm×½, E-DN20×¾ - Moving Female Adapter: 22mm×¾, E-DN25×1 - Moving Female Adapter: 28 mm×1, E-DN32×1¼ - Moving Female Adapter: 35mm×1¼, E-DN40×1½ - Moving Female Adapter: 42mm×1½, E-DN50×2 - Moving Female Adapter: 54 mm×2, E-DN10 - Slip coupling: 15mm, E-DN15 - Slip coupling: 18mm, E-DN20 - Slip coupling: 22mm, E-DN25 - Slip coupling: 28mm, E-DN32 - Slip coupling: 35mm, E-DN40 - Slip coupling: 42mm, E-DN50 - Slip coupling: 54mm, E-DN10 - Caps: 15mm, E-DN15 - Caps: 18mm, E-DN20 - Caps: 22mm, E-DN25 - Caps: 28mm, E-DN32 - Caps: 35mm, E-DN40 - Caps: 42mm, E-DN50 - Caps: 54mm, E-DN25 - Flange adapters: 28mm, E-DN32 - Flange adapters: 35mm, E-DN40 - Flange adapters: 42mm, E-DN50 - Flange adapters: 54mm.

Approval Holder:

Wegs Hubei Fluid Technology Co., Ltd

Company Name

Wegs Hubei Fluid Technology Co., Ltd

Address

Intersection of Xiyuan 7th Road and Xiyuan 10th Road, Phase III, Hitech Development Zone, Xianning City, Hubei Province

Country

China

View All Listings by this Company

Manufacturer:

Wegs Hubei Fluid Technology Co., Ltd

Company Name

Wegs Hubei Fluid Technology Co., Ltd

Address

Intersection of Xiyuan 7th Road and Xiyuan 10th Road, Phase III, Hitech Development Zone, Xianning City, Hubei Province

Country

China

View All Listings by this Company

Stainless steel plate heat exchangers with copper brazing.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

0.75 to 2”.

Marking:

UK Exchangers and product info on label.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

UKE-BR030 UKE-BR040 UKE-BR060H UKE-BR050 UKE-BR050R UKE-BR095H BR200L UKE-BR200M UKE-BR205 UKE-BRX12B

Approval Holder:

UK Exchangers Ltd

Company Name

UK Exchangers Ltd

Address

Unit 55 Stilebrook Road Olney

Postcode

MK46 5EA

Country

United Kingdom

General Email

alex@ukeltd.com

View All Listings by this Company