Filling loop assemblies consisting of a stainless steel braided EPDM lined flexible hose, an isolation valve and another isolation valve incorporating a non-verifiable double check valve assembly, verified by test (suitable for backflow protection against fluid category 3). The 171293 model is supplied with an isolation valve including a dial type pressure gauge. The 171292 model is also supplied with brass end caps incorporating EPDM washers. For use with coper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1015 Filling Loop

Size:

15mm compression

Marking:

Center, CR, flow arrow and size on body of combined isolation valve and double check assembly.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

171291 CENTER G24 FILLING LOOP 171292 CENTER G24 FILLING LOOP WITH CAPS 171293 CENTER G24 FILLING LOOP WITH GAUGE

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

The “TH Instantor” range of press fittings and pipe. Fittings incorporate EPDM ‘O’-rings Maximum working pressure 10 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304341

Size:

SEE MODEL

Marking:

Manufacturers logo, TH and size on fitting. Instantor, WRAS, size, length and ISO 21003 on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

IP10001 16mm IP10002 20mm IP10003 26mm IP10004 32mm IP10005 40mm IP10006 50mm IP10021 20 x 16mm IP10031 26 x 16mm IP10032 26 x 20mm IP10042 32 x 20mm IP10043 32 x 26mm IP10052 40 x 20mm IP10053 40 x 26mm IP10054 40 x 32mm IP10056 50 x 26mm IP10063 50 x 32mm IP10064 50 x 40mm IP11001 1/2"M x 16mm IP11021 3.4" M x 16mm IP11012 1/2" M x 20mm IP11002 3/4" M x 20mm IP11032 1" M x 20mm IP11013 1/2"M x 26mm IP11023 3/4"M x 26mm IP11003 1" M x 26mm IP11034 1"M x 32mm IP11004 1 1/4" x 32mm IP11045 1 1/4" M x 40mm IP11056 1 1/2" M x 50mm IP11066 2" M x 50mm IP12001 1/2" F x 16mm IP12021 3/4" F x 16mm IP12002 3/4" F x 20mm IP12032 1" F x 20mm IP12013 1/2" F x 26mm IP12023 3/4" F x 26mm IP12003 1" F x 26mm IP12034 1" F x 32mm IP12002 3/4" F x 20mm IP12045 1 1/4" F x 40mm IP12056 1 1/2" F x 50mm IP13001 1/2" C x 16mm IP13002 3/4" C x 20mm IP13021 3/4" C x 16mm IP13023 3/4" C x 26mm IP13033 1" X x 26mm IP13034 1" C x 32mm IP13101 1/2" C x 16mm IP13102 3/4" C x 20mm IP13110 15mm C x 16mm IP13111 22mm C x 20mm IP14001 16mm x1/2" IP14011 16mm x 15mm IP14002 20mm x 3/4" IP14022 20mm x 22mm IP14033 26mm x 22mm IP14044 26mm x 28mm IP14003 26mm x 3/4" IP14004 26mm x 1" IP14046 32mm x 28mm IP15001 16mm IP15002 20mm IP15003 26mm IP15004 32mm IP15005 40mm IP15006 50mm IP15055 40mm IP15066 50mm IP15011 16mm x 300mm IP15010 16mm x 100mm IP16001 1/2" M x 16mm IP16012 1/2" M x 20mm IP16002 3/4M x 20mm IP16032 1" M x 20mm IP16023 3/4" M x 26mm IP16003 1"M x 26mm IP16034 1"M x 32mm IP16004 1 1/4" M x 32mm IP17001 1/2" F x 16mm IP17001CP 1/2" x 16mm CP IP17012 1/2" F x 20mm IP17002 3/4" F x 20mm IP17032 1" F x 20mm IP17013 1/2" F x 26mm IP17023 3/4" F x 26mm IP17003 1" F x 26mm IP17034 1"F x 32mm IP17004 1 1/4" x 32mm IP18001 16mm IP18002 20mm IP18003 26mm IP18004 32mm IP18005 40mm IP18006 50mm IP18112 16 x 16 x 20 IP18211 20 x 16 x 16 IP18212 20 x 16 x 20 IP18221 20 x 20 x 16 IP18223 20 x 20 x 26 IP18311 26 x 16 x 16 IP18312 26 x 16 x 20 IP18313 26 x 16 x 26 IP18322 26 x 26 x 20 IP18323 26 x 20 x 26 IP18331 26 x 26 x 16 IP18332 26 x 26 x 20 IP18334 26 x 26 x 32 IP18414 32 x 16 x 32 IP18424 32 x 20 x 32 IP18432 32 x 26 x 20 IP18433 32 x 26 x 26mm IP18434 32 x 26 x 32 IP18441 32 x 32 x 16 IP18442 32 x 32 x 20 IP18443 32 x 32 x 26 IP18552 40 x 40 x 20 IP18553 40 x 40 x 26 IP18554 40 x 40 x 32 IP18663 50 x 50 x 26 IP18664 50 x 50 x 32 IP18665 50 x 50 x 40 IP19001 1/2" F x 16mm IP19012 1/2" F x 20mm IP20001 1/2" x 16mm IP20001CP 1/2" x 16mm CP IP20002 15mm x 16mm IP20002CP 15mm x 16mm CP IP20003 3/4" x 20mm IP20004 1" x 26mm IP20005 22mm x 20mm IP20006 28mm x 26mm IP20060 1/2" x 16mm IP20061 15mm x 16mm IP20062 3/4" x 20mm IP21001 16mm x 15mm IP21002 20mm x 22mm IP21003 26mm x 28mm IP21004 16mm x 1/2" IP21005 20mm x 3/4" IP21006 26mm x 1" IP30001 16 x 16 x 1/2"F IP30002 20 x 20 x 3/4" F IP30003 26 x 26 x 1" F IP30443 32 x 32 x 1" F IP30331 32 x 32 x 1"F IP51001 16mm IP51002 20mm IP51003 26mm IP51004 32mm IP93001 16mm IPAP101 16mm x 100M IPAP102 20mm x 100M IPAP103 26mm x 50M IPAP104 32mm x 50M IPAP105 16mm x 500M IPAP107 16mm x 200M IPAP111 16mm x 4M IPAP112 20mm x 4M IPAP113 26mm x 4M IPAP114 32mm x 4M IPAP115 40mm x 4M IPAP116 50mm x 4M IPAP201 16mm x 100M IPAP202 20mm x 50M IPAP203 26mm x 25M IPAP204 32mm x 25M IPAP205 26mm x 50M IPAP301 16mm x 100M IPAP302 20mm x 50M IPAP303 26mm x 25M IPAP304 32mm x 25M IPAP401 16mm x 100M IPAP402 20mm x 50M IPAP403 26mm x 25M IPAP404 32mm x 25M IPAP501 16mm x 50M IPAP502 20mm x 50M IPAP503 26mm x 25M IPAP601 16mm x 50M IPAP602 20mm x 50M IPAP603 26mm x 25M Pipe variants added January 2025: IPAP701, IPAP702, IPAP703 Pipe variant added July 2025 IPAP 504

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Conex Works, Santry Avenue, Dublin

Postcode

D09 K160

Country

Ireland

Phone

353 1 842 6255

General Email

sales@sanbra.ie

View All Listings by this Company

Range of plastic fittings incorporating an EPDM ‘O’-rings for use with MIXAL pipe. Maximum working pressure 10.0 bar

Non-metallic materials and components comply with BS6920 at 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2305315

Size:

see model

Marking:

Pipe body: Valsir, size, made in Italy, date of manufacture (YYMMDDHHMM); Fitting body: Valsir, size, other technical info etched on fitting crimp; Valsir

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

VS0100272 MIXAL PIPE D16X2 (50 METERS) coils + refrigeration insulation VS0100274 MIXAL PIPE D20X2 (50 METERS) coils + refrigeration insulation VS0100275 MIXAL PIPE D26X2 (50 METERS) coils + refrigeration insulation VS0125323 MIXAL PIPE D16X2 (50 METERS) coils + corrugated VS0125327 MIXAL PIPE D20X2 (50 METERS) coils + corrugated VS0100037 MIXAL PIPE D16X2 (5 METERS) nude bars VS0100039 MIXAL PIPE D20X2 (5 METERS) nude bars VS0100043 MIXAL PIPE D26X2 (5 METERS) nude bars VS0100045 MIXAL PIPE D.32X3 (5 METERS) nude bars VS0100137 MIXAL PIPE D16X2 (100 METERS) coils VS0100138 MIXAL PIPE D16X2 (200 METERS) coils VS0100139 MIXAL PIPE D20X2 (100 METERS) coils VS0100140 MIXAL PIPE D16X2 (450 METERS) coils VS0100141 MIXAL PIPE D16X2 (500 METERS) coils VS0100142 MIXAL PIPE D16X2 (50 METERS) coils VS0100143 MIXAL PIPE D26X2 (50 METERS) coils VS0100145 MIXAL PIPE D.32X3 (50 METERS) coils VS0100177 MIXAL PIPE D16X2 (5 METERS) coils VS0100178 MIXAL PIPE D16X2 (15 METERS) coils VS0100179 MIXAL PIPE D16X2 (10 METERS) coils VS0100180 MIXAL PIPE D16X2 (25 METERS) coils VS0100234 MIXAL PIPE D.32X3 (50 METERS) coils + 6 mm insulation VS0100237 MIXAL PIPE D16X2 (50 METERS) coils + 6 mm insulation VS0100239 MIXAL PIPE D20X2 (50 METERS) coils + 6 mm insulation VS0100241 MIXAL PIPE D16X2 (100 METERS) coils + 6 mm insulation VS0100242 MIXAL PIPE D26X2 (25 METERS) coils + 6 mm insulation VS0100243 MIXAL PIPE D26X2 (50 METERS) coils + 6 mm insulation VS0100245 MIXAL PIPE D.32X3 (25 METERS) coils + 6 mm insulation VS0100443 MIXAL PIPE D16X2 (100 METERS) coils + 6 mm blue insulation VS0100449 MIXAL PIPE D16X2 (100 METERS) coils + 6 mm red insulation VS0100450 MIXAL PIPE D16X2 (50 METERS) coils + 6 mm blue insulation VS0100451 MIXAL PIPE D16X2 (50 METERS) coils + 6 mm red insulation VS0100452 MIXAL PIPE D20X2 (50 METERS) coils + 6 mm blue insulation VS0100453 MIXAL PIPE D20X2 (50 METERS) coils + 6 mm red insulation VS0113005 MIXAL PIPE D16X2 (120 METERS) coils VS0113007 MIXAL PIPE D16X2 (240 METERS) coils VS0113011 MIXAL PIPE D20X2 (240 METERS) coils VS0113013 MIXAL PIPE D20X2 (400 METERS) coils VS0152403 90° ELBOW 90° ELBOW 16X2 VS0152409 90° ELBOW 90° ELBOW 20X2 VS0152413 90° ELBOW 90° ELBOW 26X3 VS0152415 90° ELBOW 90° ELBOW 32X3 VS0152505 MALE THREADED 90° ELBOW 16X2 X 1/2'' VS0152521 MALE THREADED 90° ELBOW 20X2 X 1/2'' VS0152525 MALE THREADED 90° ELBOW 20X2 X 3/4'' VS0152531 MALE THREADED 90° ELBOW 26X3 X 1'' VS0152535 MALE THREADED 90° ELBOW 26X3 X 3/4'' VS0152539 MALE THREADED 90° ELBOW 32X3 X 1" VS0152605 FEMALE THREADED 90° ELBOW 16X2 X 1/2'' VS0152621 FEMALE THREADED 90° ELBOW 20X2 X 1/2'' VS0152625 FEMALE THREADED 90° ELBOW 20X2 X 3/4'' VS0152631 FEMALE THREADED 90° ELBOW 26X3 X 1'' VS0152635 FEMALE THREADED 90° ELBOW 26X3 X 3/4'' VS0152639 FEMALE THREADED 90° ELBOW 32X3 X 1" VS0152205 MALE THREADED COUPLING 16X2 X 1/2'' VS0152209 MALE THREADED COUPLING 16X2 X 3/4'' VS0152213 MALE THREADED COUPLING 16X2 X 3/8'' VS0152221 MALE THREADED COUPLING 20X2 X 1/2'' VS0152225 MALE THREADED COUPLING 20X2 X 3/4'' VS0152231 MALE THREADED COUPLING 26X3 X 1'' VS0152233 MALE THREADED COUPLING 26X3 X 1/2'' VS0152235 MALE THREADED COUPLING 26X3 X 3/4'' VS0152239 MALE THREADED COUPLING 32X3 X 1" VS0152305 FEMALE THREADED COUPLING 16X2 X 1/2'' VS0152309 FEMALE THREADED COUPLING 16X2 X 3/4'' VS0152321 FEMALE THREADED COUPLING 20X2 X 1/2'' VS0152325 FEMALE THREADED COUPLING 20X2 X 3/4'' VS0152331 FEMALE THREADED COUPLING 26X3 X 1'' VS0152335 FEMALE THREADED COUPLING 26X3 X 3/4'' VS0152339 FEMALE THREADED COUPLING 32X3 X 1" VS0152905 FEMALE THREADED UNION TEE 16X2 - 1/2" - 16X2 VS0152921 FEMALE THREADED UNION TEE 20X2 - 1/2" - 20X2 VS0152925 FEMALE THREADED UNION TEE 20X2 - 3/4" - 20X2 VS0152935 FEMALE THREADED UNION TEE 26X3 - 3/4" - 26X3 VS0152939 FEMALE THREADED UNION TEE 32X3 - 1" - 32X3 VS0152937 FEMALE THREADED UNION TEE 32X3 - 3/4" - 32X3 VS0152003 STRAIGHT COUPLING 16X2 VS0152009 STRAIGHT COUPLING 20X2 VS0152013 STRAIGHT COUPLING 26X3 VS0152015 STRAIGHT COUPLING 32X3 VS0152119 REDUCING COUPLING 20X2 - 16X2 VS0152127 REDUCING COUPLING 26X3 - 16X2 VS0152131 REDUCING COUPLING 26X3 - 20X2 VS0152143 REDUCING COUPLING 32X3 - 16X2 VS0152145 REDUCING COUPLING 32X3 - 20X2 VS0152149 REDUCING COUPLING 32X3 - 26X3 VS0152703 UNION TEE 16X2 VS0152709 UNION TEE 20X2 VS0152713 UNION TEE 26X3 VS0152715 UNION TEE 32X3 VS0152807 REDUCING UNION TEE 16X2 - 20X2 - 16X2 VS0152815 REDUCING UNION TEE 20X2 - 16X2 - 16X2 VS0152819 REDUCING UNION TEE 20X2 - 16X2 - 20X2 VS0152825 REDUCING UNION TEE 20X2 - 20X2 - 16X2 VS0152829 REDUCING UNION TEE 20X2 - 26X3 - 20X2 VS0152881 REDUCING UNION TEE 26X3 - 16X2 - 16X2 VS0152833 REDUCING UNION TEE 26X3 - 16X2 - 26X3 VS0152839 REDUCING UNION TEE 26X3 - 20X2 - 20X2 VS0152843 REDUCING UNION TEE 26X3 - 20X2 - 26X3 VS0152883 REDUCING UNION TEE 26X3 - 26X3 -16X2 VS0152847 REDUCING UNION TEE 26X3 - 26X3 -20X2 VS0152851 REDUCING UNION TEE 32X3 - 16X2 - 32X3 VS0152853 REDUCING UNION TEE 32X3 - 20X2 - 32X3 VS0152857 REDUCING UNION TEE 32X3 - 26X3 - 26X3 VS0152859 REDUCING UNION TEE 32X3 - 26X3 - 32X3 VS0152891 REDUCING UNION TEE 32X3 - 32X3 - 20X2 VS0152893 REDUCING UNION TEE 32X3 - 32X3 - 26X3 VS0153005 WINGBACK ELBOW 16X2 - 1/2'' VS0153021 WINGBACK ELBOW 20X2 - 1/2" VS0153025 WINGBACK ELBOW 20X2 - 3/4" VS0153035 WINGBACK ELBOW 26X3 - 3/4"

Product Images

Approval Holder:

Valsir Spa

Company Name

Valsir Spa

Address

MERLARO 2 STREET VESTONE

Postcode

25078

Country

Italy

Phone

+39 365 877011

General Email

valsir@valsir.it

View All Listings by this Company

Range of copper press fittings with EPDM seals for use with EN1057 copper tube. The joints are achieved by means of a press tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112371

Size:

see models

Marking:

Valtech on body

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

CPM05 Press 90°Bend C×C (12,15,22,28,35,42,54mm) CPM07 Press 90° Bend FTG×C(12,15,22,28,35,42,54mm) CPM08 Press 45° Bend C×C (12,15,22,28,35,42,54mm) CPM09 Press 45° Bend FTG×C (12,15,22,28,35,42,54mm) CPM10 Press Tee C×C×C (12,15,22,28,35,42,54mm) CPM11 Press ReducingTee C×C×C (15×15×12, 22×22×15, 22×22×12, 22×15×15, 22×15×22, 28×28×22, 28×28×15, 28×15×22, 28×22×22, 28×15×28, 28×22×28, 35×35×28, 35×35×22,35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42, 54×54×35, 54×54×28, 54×54×22) CPM12 Press Cap (12,15,22,28,35,42,54mm) CPM01 Press Coupling C×C (12,15,22,28,35,42,54mm) CPM04 Press Fitting Reducer Ftg×C (15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35, 54×28, 54×22) CPM03 Press Reducing Coupling C×C (15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35)

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

“Inox press-fitting system” range of stainless-steel press fittings with EPDM ‘O’-rings for use with stainless steel pipe (manufactured to EN10312 series 2). Joints are achieved using a press fitting tool. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2306062

Size:

See models

Marking:

Filinox logo, size, material & certification number on fitting body.

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

27M15, Straight Coupling 15mmx15mm 27M18, Straight Coupling 18mmx18mm 27M22, Straight Coupling 22mmx22mm 27M28, Straight Coupling 28mmx28mm 27M35, Straight Coupling 35mmx35mm 26M42, Straight Coupling 42mmx42mm 26M54, Straight Coupling 54mmx54mm 26M76, Straight Coupling 76.1mm x 76.1mm 26M88, Straight Coupling 88.9mm x 88.9mm 26M108, Straight Coupling 108mm x 108mm 27UM15X12, Straight Adapter Male 15mm x 1/2” BSP 27UM18X12, Straight Adapter Male 18 x ½” BSP 27UM22X12, Straight Adapter Male 22 x ½” BSP 27UM15X34, Straight Adapter Male 15 x ¾” BSP 27UM18X34, Straight Adapter Male 18mm x ¾” BSP 27UM22X34, Straight Adapter Male 22mm x ¾” BSP 27UM28X34, Straight Adapter Male 28mm x ¾” BSP 27MST15 Sleeve Coupling 15MM x 15MM 27MST18 Sleeve Coupling 18MM x 18MM 27MST22 Sleeve Coupling Sleeve Coupling 22mm x 22mm 27MST28 Sleeve Coupling 28mm x 28mm 27MST35 Sleeve Coupling 35mm x 35mm 26MST42 Sleeve Coupling 42mm x 42mm 26MST54 Sleeve Coupling 54mm x 54mm 26MST76 Sleeve Coupling 76.1mm x 76.1mm 26MST88 Sleeve Coupling 88.9mm x 88.9mm 26MST108 Sleeve Coupling 108mm x 108mm 27RE18X15 Straight Coupling Reduction 18mm x 15mm 27RE22X15 Straight Coupling Reduction 22mm x 15mm 27RE22X18 Straight Coupling Reduction 22mm x 18mm 27RE28X15 Straight Coupling Reduction 28mm x 15mm 27RE28X18 Straight Coupling Reduction 28mm x 18mm 27RE28X22 Straight Coupling Reduction 28mm x 22mm 27RE35X22 Straight Coupling Reduction 35mm x 22mm 27RE35X28 Straight Coupling Reduction 35mm x 28mm 27RE42X22 Straight Coupling Reduction 42mm x 22mm 27RE42X28 Straight Coupling Reduction 42mm x 28mm 27RE42X35 Straight Coupling Reduction 42mm x 35mm 27RE54X22 Straight Coupling Reduction 54mm x 22mm 27RE54X28 Straight Coupling Reduction 54mm x 28mm 27RE54X35 Straight Coupling Reduction 54mm x 35mm 26RE54X42 Straight Coupling Reduction 54mm x 42mm 26RE76X54 Straight Coupling Reduction 76.1mm x 54mm 26RE88X54 Straight Coupling Reduction 88.9mm x 54mm 26RE88X76 Straight Coupling Reduction 88.9mm x 76.1mm 26RE108X54 Straight Coupling Reduction 108mm x 54mm 26RE108X76 Straight Coupling Reduction 108mm x 76.1mm 26RE108X88 Straight Coupling Reduction 108mm x 88.9mm 27RPJP15X12 Joint Connector Female 15 x ½” BSP 27RPJP15X34 Joint Connector Female 15 x ¾” BSP 27RPJP18X12 Joint Connector Female 18 x ½” BSP 27RPJP18X34 Joint Connector Female 18 x ¾” BSP 27RPJP22X34 Joint Connector Female 22 x ¾” BSP 27RPJP22X10 Joint Connector Female 22 x 1” BSP 27RPJP28X10 Joint Connector Female 28 x 1” BSP 27RPJP28X114 Joint Connector Female 28 x 5/4 27RPJP35X114 Joint Connector Female 35 x 5/4 26RPJP42X112 Joint Connector Female 42 x 3/2 26RPJP54X20 Joint Connector Female 54 x 2” BSP 26RPJP76X212 Joint Connector Female 76.1 x 2 ½” BSP 27C90HH15 Bend 90º F-F 15mm 27C90HH18 Bend 90º F-F 18mm 27C90HH22 Bend 90º F-F 22mm 27C90HH28 Bend 90º F-F 28mm 27C90HH35 Bend 90º F-F 35mm 26C90HH42 Bend 90º F-F 42mm 26C90HH54 Bend 90º F-F 54mm 26C90HH76 Bend 90º F-F 76.1mm 26C90HH88 Bend 90º F-F 89.1 26C90HH108 Bend 90º F-F 108mm 27C90HM15 Bend 90º F-M 15mm 27C90HM18 Bend 90º F-M 18mm 27C90HM22 Bend 90º F-M 22mm 27C90HM28 Bend 90º F-M 28mm 27C90HM35 Bend 90º F-M 35mm 26C90HM42 Bend 90º F-M 42mm 26C90HM54 Bend 90º F-M 54mm 26C90HM76 Bend 90º F-M 76.1mm 26C90HM88 Bend 90º F-M 88.9mm 26C90HM108 Bend 90º F-M 108mm 27C45HH15 Bend 45º F-F 15mm 27C45HH18 Bend 45º F-F 18mm 27C45HH22 Bend 45º F-F 22mm 27C45HH28 Bend 45º F-F 28mm 27C45HH35 Bend 45º F-F 35mm 26C45HH42 Bend 45º F-F 42mm 26C45HH54 Bend 45º F-F 54mm 26C45HH76 Bend 45º F-F 76.1mm 26C45HH88 Bend 45º F-F 88.9mm 26C45HH108 Bend 45º F-F 108mm 27C45HM15 Bend 45º F-M 15mm 27C45HM18 Bend 45º F-M 18mm 27C45HM22 Bend 45º F-M 22mm 27C45HM28 Bend 45º F-M 28mm 27C45HM35 Bend 45º F-M 35mm 26C45HM42 Bend 45º F-M 42mm 26C45HM54 Bend 45º F-M 54mm 26C45HM76 Bend 45º F-M 76.1mm 26C45HM88 Bend 45º F-M 88.9mm 26C45HM108 Bend 45º F-M 108mm 27CM15X12 Elbow Transition Male 15mm X ½” BSP 27CM18X12 Elbow Transition Male 18MM X ½” BSP 27CM22X34 Elbow Transition Male 22MM X ¾” BSP 27CM28X10 Elbow Transition Male 28MM X 1” BSP 27CM35X114 Elbow Transition Male 35MM X 5/4 26CM42X112 Elbow Transition Male 42MM X 3/2 26CM54X20 Elbow Transition Male 54MM X 2 27CH15X12 Elbow Transition Female 15mm X ½” BSP 27CH18X12 Elbow Transition Female 18mm X ½” BSP 27CH22X34 Elbow Transition Female 22mm X ¾” BSP 27CH28X10 Elbow Transition Female 28mm X 1” BSP 27CH35X114 Elbow Transition Female 35mm X 5/4 26ST15 Straight By-Pass 15mm X 15mm 26ST18 Straight By-Pass 18mm X 18mm 26ST22 Straight By-Pass 22mm X 22mm 26ST28 Straight By-Pass 28mm X 28mm 26CA1528 Bend 15º M-M 28mm 26CA1535 Bend 15º M-M 35mm 26CA1542 Bend 15º M-M 42mm 26CA1554 Bend 15º M-M 54mm 26CA3028 Bend 30º M-M 28mm 26CA3035 Bend 30º M-M 35mm 26CA3042 Bend 30º M-M 42mm 26CA3054 Bend 30º M-M 54mm 26CA6028 Bend 60º M-M 28mm 26CA6035 Bend 60º M-M 35mm 26CA6042 Bend 60º M-M 42mm 26CA6054 Bend 60º M-M 54mm 26CA9015 Bend 90º M-M 15mm 26CA9018 Bend 90º M-M 18mm 26CA9022 Bend 90º M-M 22mm 26CA9028 Bend 90º M-M 28mm 26CA9035 Bend 90º M-M 35mm 26CA9042 Bend 90º M-M 42mm 26CA9054 Bend 90º M-M 54mm 27CDHM15 By-Pass Bend M - F 15mm 27CDHM18 By-Pass Bend M - F 18mm 27CDHM22 By-Pass Bend M - F 22mm 27T15 Tee Coupling F-F-F 15mm 27T18 Tee Coupling F-F-F 18mm 27T22 Tee Coupling F-F-F 22mm 27T28 Tee Coupling F-F-F 28mm 27T35 Tee Coupling F-F-F 35mm 26T42 Tee Coupling F-F-F 42mm 26T54 Tee Coupling F-F-F 54mm 26T76 Tee Coupling F-F-F 76,1mm 26T88 Tee Coupling F-F-F 88,9mm 26T108 Tee Coupling F-F-F 108mm 27TR18X15 Tee Coupling Reduction F-F-F 18mm x 15mm x 18mm 27TR22X15 Tee Coupling Reduction F-F-F 22mm x 15mm x 22mm 27TR22X18 Tee Coupling Reduction F-F-F 22mm x 18mm x 22mm 27TR28X15 Tee Coupling Reduction F-F-F 28mmx 15mm x 28mm 27TR28X18 Tee Coupling Reduction F-F-F 28mm x 18mm x 28mm 27TR28X22 Tee Coupling Reduction F-F-F 28mm x 22mm x 28mm 27TR35X15 Tee Coupling Reduction F-F-F 35mm x 15mm x 35mm 27TR35X18 Tee Coupling Reduction F-F-F 35mm x 18mm x 35mm 27TR35X22 Tee Coupling Reduction F-F-F 35mm x 22mm x 35mm 27TR35X28 Tee Coupling Reduction F-F-F 35mm x 28mm x 35mm 27TR42X22 Tee Coupling Reduction F-F-F 42mm x 22mm x 42mm 27TR42X28 Tee Coupling Reduction F-F-F 28mm x 42mm x 42mm 27TR42X35 Tee Coupling Reduction F-F-F 42mm x 35mm x 42mm 27TR54X22 Tee Coupling Reduction F-F-F 54mm x 22mm x 54mm 27TR54X28 Tee Coupling Reduction F-F-F 54MM x 28MM x 54MM 27TR54X35 Tee Coupling Reduction F-F-F 54MM x 35MM x 54MM 26TR54X42 Tee Coupling Reduction F-F-F 54MM x 42MM x 54MM 27TR76X22 Tee Coupling Reduction F-F-F 76.1MM x 22MM x 76.1MM 27TR76X28 Tee Coupling Reduction F-F-F 76,1MM x 28MM x 76,1MM 27TR76X35 Tee Coupling Reduction F-F-F 76,1MM x 35MM x 76,1MM 26TR76X42 Tee Coupling Reduction F-F-F 76,1 x 42 x 76,1 26TR76X54 Tee Coupling Reduction F-F-F 76,1 x 54 x 76,1 27TR88X22 Tee Coupling Reduction F-F-F 88,9 x 22 x 88,9 27TR88X28 Tee Coupling Reduction F-F-F 88,9 x 28 x 88,9 27TR88X35 Tee Coupling Reduction F-F-F 88,9 x 35 x 88,9 26TR88X42 Tee Coupling Reduction F-F-F 88,9 x 42 x 88.9 26TR88X54 Tee Coupling Reduction F-F-F 88,9 x 54 x 88,9MM 26TR88X76 Tee Coupling Reduction F-F-F 88.9 x 76.1 x 88.9mm 27TR108X22 Tee Coupling Reduction F-F-F 108mm x 22mm x 108mm 27TR108X28 Tee Coupling Reduction F-F-F 108mm x 28mm x 108mm 27TR108X35 Tee Coupling Reduction F-F-F 108mm x 35mm x 108mm 26TR108X42 Tee Coupling Reduction F-F-F 108mm x 42mm x 108mm 26TR108X54 Tee Coupling Reduction F-F-F 108mm x 54mm x 108mm 26TR108X76 Tee Coupling Reduction F-F-F 108mm x 76,1mm x 108mm 26TR108X88 Tee Coupling Reduction F-F-F 108mm x 88,9mm x 108mm 27TH15X12 Press Tee Coupling Press –15mm x 1/2 x 15mm 27TH18X12 Tee Coupling Press–F –18mm x ½” x 18mm 27TH18X34 Tee Coupling Press–F –18mm x ¾” x 18mm 27TH22X12 Tee Coupling Press–F –22mm x ½” x 22mm 27TH22X34 Tee Coupling Press–F –22mm x ¾” x 22mm 27TH28X12 Tee Coupling Press–F –28mmx ½” x 28mm 27TH28X34 Tee Coupling Press–F –28mm x 3/4 x 28mm 27TH35X12 Tee Coupling Press–F –35mm x 1/2 x 35mm 27TH35X34 Tee Coupling Press–F –35mm x 3/4 x 35mm 26TH42X12 Tee Coupling Press–F Press 42mm x 1/2 x 42mm 26TH42X34–Press Tee Coupling Female –42mm x ¾” x 42mm 26TH54X12–Press Tee Coupling Female – 54mm x 1/2 x 54mm 26TH54X34 Tee Coupling Press– Female –54mm x ¾” x 54mm 26TH54X20 Press Tee Coupling Press – Female – Press 54mm x 2 x 54mm 26TH76X34 Press Tee Coupling Press – Female – Press 76.1mm x 3/4 x 76.1mm 26TH76X20 Press Tee Coupling Press – Female – Press 76.1mm x 2 x 76.1mm 26TH88X34 Press Tee Coupling Press – Female – Press 88.9mm x 3/4 x 88.9mm 26TH88X20 Press Tee Coupling Press – Female – Press 88.9mm x 2 x 88.9mm 26TH108X34 Press Tee Coupling Press – Female – Press 108 x 3/4 x 108mm 26TH108X20 Press Tee Coupling Press – Female – Press 108mm x 2 x 108mm 27CF15X12 Wallplate Female –Press 15mm x ½” 27CF18X12 Wallplate Female –Press 18mm x ½” 27CF22X34 Wallplate Female –Press 22mm x ¾” 27CF28X10 Wallplate Female –Press 28mm x 1” 27BA15 Flange with Press-Joint Flange 27BA18 Flange with Press-Joint 18mm 27BA22 Flange with Press-Joint 22mm 27BA28 Flange with Press-Joint 28mm 27BA35 Flange with Press-Joint 35mm 26BA42 Flange with Press-Joint 42mm 26BA54 Flange with Press-Joint 54mm 26BA76 Flange with Press-Joint 76.mm 26BA88 Flange with Press 88.9mm 26BA108 Flange with Press 108mm 27TA15 End Cap Press 15mm 27TA18 End Cap Press 18mm 27TA22 End Cap Press 22mm 27TA28 End Cap Press 28mm 27TA35 End Cap Press 35mm 26TA42 End Cap Press 42mm 26TA54 End Cap Press 54mm 26TA76 End Cap Press 76.1mm 26TA88 End Cap Press 88.9mm 26TA108 End Cap Press 108mm 27CD15 Expansion Compensator 15mm 27CD18 Expansion Compensator 18mm 27CD22 Expansion Compensator 22mm 27CD28 Expansion Compensator 28mm 27CD35 Expansion Compensator 35mm 26CD42 Expansion Compensator 42mm 26CD54 Expansion Compensator 54mm 26CD76 Expansion Compensator 76.1mm 26CD88 Expansion Compensator 88.9mm 26CD108 Expansion Compensator 108mm

Product Images

Approval Holder:

FILINOX, S.A.

Company Name

FILINOX, S.A.

Address

C/ SANT JOAN BAPTISTA, 53, 59 LA TORRE DE CLARAMUNT

Postcode

E-08789

Country

Spain

Phone

+ 34 932 232 662

General Email

ppenya@inoxidables.com

View All Listings by this Company

Manufacturer:

FILINOX, S.A.

Company Name

FILINOX, S.A.

Address

C/ SANT JOAN BAPTISTA, 53, 59 LA TORRE DE CLARAMUNT

Postcode

E-08789

Country

Spain

Phone

+ 34 932 232 662

General Email

ppenya@inoxidables.com

View All Listings by this Company