Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body. The products incorporate a drain port between the cartridges. Compression connection for use with copper pipe to BS EN1057 Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

251102720

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

JET, flow arrow, CR, and size on body

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

K74234 – 1” MBSP External thread; 3/4” FBSP Internal thread, 22mm Compression

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies (brass bodies – various finishes) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.

WRAS Approval Number:

251102016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The products are supplied with a lever type pop up waste set – not verified by test.

Size:

Stainless Steel braided PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections

Marking:

Grohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2030

Model:

23.263.xx1 32.882.xx1 24.332.xx1 where xx1 denotes finish, can be replaced by: 001 – Chrome DC1 – Supersteel DA1 – Warm sunset AL1 – Brushed hard graphite GL1 – cool sunrise 23.263.xx1, 32.882.xx1 and 24.332.xx1 have identical water pathways, just pop-up waste or packaging (swift) is different.

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assembly (brass bodies – various finishes) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.

WRAS Approval Number:

251102029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8” BSP (F) captive nut end connections.

Marking:

Sanycces on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2030

Model:

MBD001XX Where XX denotes the finish and can be replaced with any of the following: CR = chrome BM = Matte Black MG = Gun Metal NB = Brushed Nickel BG = Brushed Gold RG = Brushed Rose Gold

Approval Holder:

SANYCCES DESIGN S.L.U.

Company Name

SANYCCES DESIGN S.L.U.

Address

C/COURE, p11 BURRIANA

Postcode

12530

Country

Spain

Phone

0034639269393

General Email

j.nevot@sanycces.es

View All Listings by this Company

Single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assembly (brass bodies – various finishes) incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.

WRAS Approval Number:

251102034

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections

Marking:

Villeroy & Boch on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2030

Model:

TVB116001000XX Where XX denotes the finish and can be replaced with any of the following: 61 – Chrome K5 - Matt black 76 - Brushed gold 64 - Brushed nickel

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Section:

0440 Headworks

Description:

A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

Plastic body/bodies

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

30/11/2030

Notes & Further Information

30 122 100 - Diameter= 25,4mm 30 122 101 - Diameter= 25,4mm 30 333 001 - Diameter= 25,4mm 30 746 700 - Diameter= 25,4mm 30 746 702 - Diameter= 25,4mm 30 579 600 - Diameter= 25,4mm

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company