'MC-PROOF 4210 AE'. Site applied, grey coloured (once mixed), two-component polyol and prepolymer based coating. Mix Part A (grey liquid) with Part B (amber liquid) in a volume ratio of 1:1 and apply as per manufacturer's TDS '07.10.2025'. Cure for 24 hours@7°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2305567

Expiry date:

31/05/2028

Approval Holder:

Dow Chemical Company

Company Name

Dow Chemical Company

Address

5 Oakwater Park, Cheadle Royal Business Park, Cheadle

Postcode

SK8 3SR

View All Listings by this Company

'WL1225 Lubricant Soft Soap'. Amber coloured (translucent) lubricant. Apply as per manufacturer's IFU dated 22nd April 2025. For use with water up to 65°C. This material incorporates a natural ingredient. Please note that water companies will evaluate the evidence provided and may ask for more information and they reserve the right to refuse installation.

Section:

5160 Lubricants

Expiry date:

31/10/2030

Approval Holder:

Vapurcu Kimya Bitkisel Sabun ve Ins. San. Tic. Ltd. Sti.

Company Name

Vapurcu Kimya Bitkisel Sabun ve Ins. San. Tic. Ltd. Sti.

Address

Isteks Dokumacilar Sanayi Sitesi, A3 Block No 16 Basaksehir, Istanbul

Country

Turkey

View All Listings by this Company

'JXPE100LP'. Blue coloured, extruded HDPE pipe. For use with water up to 23°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

251055037

Expiry date:

31/10/2030

Approval Holder:

Tianjin Junxing Pipe Group Co., Ltd.

Company Name

Tianjin Junxing Pipe Group Co., Ltd.

Address

No.1 Kaiyuan Road, Meichang Town, Fuyuan Economic Development Area, Wuqing District, Tianjin, 301701

Country

China

View All Listings by this Company

'SABIC® PP PHC 31'. White coloured, injection moulded polypropylene material. For use with water up to 23°C.

Section:

5265 Polypropylene

Section Subtitle:

Material only. Components made from materials listed in this section may require to be submitted for audit tests.

WRAS Approval Number:

250755063

Expiry date:

31/07/2030

Approval Holder:

SABIC Petrochemicals B.V.

Company Name

SABIC Petrochemicals B.V.

Address

Europaboulevard 1, 6135 PD Sittard

Country

Netherlands

Phone

+31 (46) 7222222

View All Listings by this Company

'PTFE Thread Seal Tape 201 (white), 202 (pink), 203 (yellow), 204 (blue) & 205 (grey)'. PTFE tapes, manufactured by extrusion, stretching and calendaring, available in a range of colours. For use with water up to 85°C.

Section:

5294 Polytetrafluoroethylene (PTFE)

Section Subtitle:

Components.

WRAS Approval Number:

251055033

Expiry date:

31/10/2030

Approval Holder:

Nan'an City Nanmei Fluorine Sanitary Ware Co., Ltd.

Company Name

Nan'an City Nanmei Fluorine Sanitary Ware Co., Ltd.

Address

No.32, Yuansheng New District, Xiyi Village, Meilin Town, Nan’an City, Fujian Province

Country

China

View All Listings by this Company