Directory Search Results

Print List

#2104087

Wall mounted hose union tap (DZR brass body) incorporating a non-rising spindle headwork with a butterfly handle operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1780 Taps
Section Subtitle:
Hose union tap(s).
WRAS Approval Number:
2104087
Size:
¾” BSP male inlet x 19mmØ hose outlet
Marking:
HC logo, WRAS and size on body.
Installation Requirements:
R001 R040
Expiry date:
30/04/2026
Model:
HC-B20205-20

Approval Holder:
Home Creator Group Ltd
Company Name
Home Creator Group Ltd
Address
167 - 169 Great Portland Street London
Postcode
W1W 5PF
Country
United Kingdom

View All Listings by this Company

Print This Approval


#250104029

Range of wall mounted hose union taps with brass bodies incorporating a rising spindle headwork with a T - handle operating member. Model HC-20252-15 incorporates a lockshield device at the base of the operating stem. The spout outlets incorporate a hose union connector. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1780 Taps
Section Subtitle:
Hose union tap(s).
WRAS Approval Number:
250104029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP(M)
Marking:
HC logo, size, WRAS & date of manufacture (MM-YY) on body
Installation Requirements:
R001 R040
Expiry date:
31/01/2030
Model:
HC-B20205-15 & HC-20252-15 (natural brass).

Approval Holder:
Home Creator Group Ltd
Company Name
Home Creator Group Ltd
Address
167 - 169 Great Portland Street London
Postcode
W1W 5PF
Country
United Kingdom

View All Listings by this Company

Print This Approval


#260104002

502 series of automatic air venting valves with brass bodies, plastic float and EPDM ‘O’-rings. For non-potable water use only. Maximum working pressure 10.0 bar. Maximum operating temperature see models.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
260104002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
Caleffi logo on body.
Installation Requirements:
R001 R200
Expiry date:
31/01/2031
Model:
502930 TH 3/8" 110°C 502934 CST 3/8" 110°C 502420 1/4" 115 °C 502430 3/8" 115 °C 502430 CON 3/8" 115 °C 502430 CST 3/8" 115 °C 502431 BSC 3/8" 115 °C 502434 CST 3/8" 115 °C 502435 CST 3/8" 115 °C 502530 TH 3/8" 110°C 502530 TH1 3/8" 110°C 502641 3/8" 115°C 502643A 1/2" NPT 115°C 502533 3/8" 110°C 502533 FRT 3/8" 110°C 502533 TAK 3/8" 110°C 502543 3/8" 110°C 502533 RIF 3/8" 110°C 502530 3/8" 110°C 502141 1/2" 110 °C 502142 1/2" 110 °C 502145 RIF 1/2" 110 °C 502145 RSR 1/2" 110 °C 502630 3/8" 115°C 502630 CST 3/8" 115°C 502636 CST 3/8" 115°C 502638 CST 3/8" 115°C 502638 OEM 3/8" 115°C 502631 CST 3/8" 115°C 502822 1/4" NPT 502620A 1/4" NPT 115°C 502610A 1/8" NPT 115°C 502630 WLF 3/8" 115°C 502634 CST 3/8" 115°C 502640 1/2" 115°C 502649 1/2" 115°C 502649 CST 1/2" 115°C 502730 3/8" 110°C 502730 CST 3/8" 110°C 502730 BSC 3/8" 110°C 502730 NTR 3/8" 110°C 502710A 1/8" NPTF 110°C 502720A 1/4" NPTF 110°C 502030 3/8" 120 °C 502030 CON 3/8" 120 °C 502030 CST 3/8" 120 °C 502035 CST 3/8" 120 °C 502037 CST 3/8" 120 °C 502037 VLL 3/8" 120 °C 502037 WLF 3/8" 120 °C 502038 CST 3/8" 120 °C 502020 CST 1/4" 120 °C 502034 CST 3/8" 120 °C 502130 3/8" 110 °C 502031 3/8" 120 °C 502130 TH1 3/8" 110 °C 502033 CST 3/8" 120 °C 502015A 1/8" NPT 120 °C 502015 B&G 1/8" NPT 120 °C 502015A WEB 1/8" NPT 120 °C 502015 MTR 1/8" NPT 120 °C 502040A 1/2" NPT 120 °C 502040A WEB 1/2" NPT 120 °C 502043A 1/2" NPT 120 °C 502043A CST 1/2" 120 °C 502044 CST 1/2" 120 °C 502040 1/2" 120 °C 502040 CST 1/2" 120 °C 502043 1/2" 120 °C 502043 CST 1/2" 120 °C 502140 1/2" 110 °C 502140 FRT 1/2" 110 °C 502041 1/2" 120 °C 502041 MI 1/2" 120 °C 502046 IMM 1/2" 120 °C 502221 1/4" 120°C 502231 3/8" 120°C 502231 CST 3/8" 120°C 502232 TH 3/8" 120°C 502241 1/2" 120°C 502243A 1/2" NPTF 120°C 502343A 1/2" NPTF 120°C 502246 IMM 1/2" 120°C 502242 TH 1/2" 120°C 502115A 1/8" NPT 110 °C 502133 3/8" 110 °C 502131 3/8" 110 °C 502131 TH 3/8" 110 °C 502132 DEC 3/8" 110 °C 502130 CST 3/8" 110 °C 502130 FRT 3/8" 110 °C 502130 TAK 3/8" 110 °C 502130 TH 3/8" 110 °C 502135 RIF 3/8" 110 °C 502050 3/4" 120 °C 502051 3/4" 120 °C 502052 CST 3/4" 120 °C 502060 1" 120 °C 502055 120 °C 502061 1" 120 °C 502067 1" 120 °C 502400 CST Press fitting ø22,2 customer designed 115 °C 501500 3/4" 120 °C

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#240902022

Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating quarter turn ceramic disc headwork and a two-way, half-turn ceramic disc manual diverter for dual outlet models. The inlets incorporate a stainless-steel strainer & an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240902022
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Shower hose, handset and overhead shower are not supplied.
Size:
¾” BSP (F)
Marking:
Intatec logo on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2029
Model:
IXV0007CP IXV0004CP IXV0007CP + INSPIRATION B = IX100022CP – SINGLE OULET IXV0004CP + INSPIRATION A = IX200020CP & IX200025CP – DUAL OUTLET MODELS ADDED JULY 2025 ST10010CP - SINGLE OUTLET ST12020CP - DUAL OUTLET

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#2212120

Range of wall mounted thermostatic blending valves (chrome plated brass), incorporating a half turn ceramic disc headworks (see models). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button, with a variety of operating members. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection with stainless-steel strainers. Maximum working pressure 5.0 Bar.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2212120
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M) X 1/2" BSP (M) offset unions.
Marking:
ROCA logo on body
Installation Requirements:
R001 R040
Expiry date:
31/12/2027
Model:
TN50202000000000 TN50202100000000

Approval Holder:
Roca Sanitario
Company Name
Roca Sanitario
Address
Rambla Lluch, 2 08850 Gava, Spain

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 21 of 30

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.