Headwork assemblies (stainless steel or brass bodies) incorporating a quarter turn ceramic disc with single lever operating member. The outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

2109031

Size:

½” BSP (M)

Marking:

Vola on operating member

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

S50XX, S50HXX, S50MXX & S50LXX - Stainless Steel Trim Kits. XX denotes surface finish and is replaced with: 40 = Brushed Stainless Steel. 61 = Brushed Black. 64 = Brushed Copper. 70 = Brushed Gold. S50XX, S50HXX, S50MXX & S50LXX - Brass Trim Kits. XX denotes surface finish and is replaced with: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Headwork assemblies (stainless steel or brass bodies) incorporating a quarter turn ceramic disc with single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

2109032

Size:

½” BSP (M)

Marking:

Vola on operating member

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

S50DXX & S50DHXX - Stainless Steel Trim Kits. XX denotes surface finish and is replaced with: 61 = Brushed Black. 64 = Brushed Copper. 70 = Brushed Gold. S50DXX & S50DHXX - Brass Trim Kits. XX denotes surface finish and is replaced with: 02 = Grey. 04 = Blue. 05 = Orange. 06 = Light Green. 08 = Yellow. 09 = Dark Grey. 12 = Mocca. 14 = Bright Red. 15 = Dark Blue. 16 = Chrome. 17 = Gloss Black. 18 = White. 19 = Natural Brass. 20 = Brushed Chrome. 21 = Carmine Red. 25 = Pink. 27 = Matt Black. 28 = Matt White. 60 = Black. B61 = Brushed Black. 62 = Deep Black. 63 = Copper. B64 = Brushed Copper. 65 = Gold. 66 = Dark Gold. 68 = Nickel. B70 = Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of quarter turn ceramic disc and cartridge headworks with plastic bodies to be inserted into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

2112026

Size:

See model

Marking:

XMSXST & WRAS on Body

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

35mm Ø Ceramic cartridge: FX350100 20mm Ø Ceramic cartridge: FX200800 FX201000 FX201400

Approval Holder:

Xiamen water core technology Co., Ltd

Company Name

Xiamen water core technology Co., Ltd

Address

4 / F, Building A, 700-702 Caotang Road, Tong 'an District, Xiamen City, Fujian Province

View All Listings by this Company

Manufacturer:

Xiamen water core technology Co., Ltd

Company Name

Xiamen water core technology Co., Ltd

Address

4 / F, Building A, 700-702 Caotang Road, Tong 'an District, Xiamen City, Fujian Province

View All Listings by this Company

Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The connection between the body and the spout incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet incorporates a plastic aerator. The products are supplied with optional ½” BSP (F) x ⅜ BSP (M) brass adaptors and NBR washers for installation on each inlet hose. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

2107328

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ⅜” captive nut end connections.

Marking:

Comap on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

Jeroni Chef Range: 922138 (Chrome Body/Black Spout). 922139 (Brushed Nickel Body/Black Spout). 922140 (White Body/Grey Spout). 922141 (Black Body / Black Spout). 922145 (Gun Metal Bdy/Black Spout). 922146 (Antique Brass Body/Black Spout). 922147 (Copper Body / Black Spout).

Approval Holder:

Standard Hidráulica, S.A.U

Company Name

Standard Hidráulica, S.A.U

Address

Avenida de la Ferreria 73 Montcada i Reixac

Postcode

08110

Country

Spain

General Email

Jorge.casado@sth.email

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass or stainless steel body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The HV3 model is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 65 °C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2109706

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 10mm spigot end connections.

Marking:

VOLA on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2026

Model:

VOLA HV1 & VOLA HV3 - Stainless Steel body. Where XX denotes surface finish Brass body models available in: 02 = Grey, 04 = Light Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Polished chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold. Stainless Steel body models available in: 40 = Brushed Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold. 71 = Brushed Dark Copper.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company