Screw down stop valves with brass bodies and dome type operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

241004051

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” x ½” BSP (M).

Marking:

GALA & WRAS on body

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

6410 Angle Pattern stop valves

Approval Holder:

GALA RS INC

Company Name

GALA RS INC

Address

8605 SANTA MONICA BLVD 30327 WEST HOLLYWOOD，CA 90069

Country

United States

View All Listings by this Company

Range of commercial dish washing machines with flow controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only.

Section:

2390 Dishwasher(s)

Size:

¾” BSP(F) captive nut

Marking:

Maidaid, Company address, Model No, Serial No. Brand, Date of manufacture DD/MM/YY & other technical info on adhesive label on panel

Installation Requirements:

R001 R574

Expiry date:

31/03/2028

Model:

UT61-E UT61H-E UT70-E UT132-E

Approval Holder:

Buttress Group Ltd T/A Maidaid Halcyon

Company Name

Buttress Group Ltd T/A Maidaid Halcyon

Address

The Engine Shed Top Station Road Brackley

Country

Northamptonshire

View All Listings by this Company

Range of UV disinfection units with stainless steel bodies. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2411 Disinfection Equipment

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

ESCO International, model, size, pressure and product info on label.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

31/03/2030

Model:

ECO-05, ECO-10, ECO-20, ECO-30, ECO-45, ECO-60, ECO-85 ECO-20LCD, ECO-20LCD-P ECO-45LCD, ECO-45LCD-P ECO-60LCD, ECO-60LCD-P ECO-75LCD ECO-85LCD, ECO-85LCD-P EC0-100LCD, ECO-100LCD-P ECO-200LCD, EC200LCD-P EC1-20R-LCD, EC1-20R-LCD-P EC1-30R-LCD, EC1-30R-LCD-P EC1-40R-LCD, EC1-40R-LCD-P AML24R-LCD, AML24R-LCD-P AML50R-LCD, AML50R-LCD-P AML60R-LCD, AML60R-LCD-P AML96-P AML125-P AML160-P UV4IT, UV10IT, UV40IT, UV80IT EC400-1 (TS/ECO), EC400-2 (TS/ECO), EC400-3 (TS/ECO), EC400-4 (TS/ECO), EC400-5 (TS/ECO), EC400-6 (TS/ECO), EC400-8 (TS/ECO) SIZE: 1/8" 1/2"M 3/4"M 1"M 1 1/2"M 2"M DN80 DN100 DN150 DN200 DN250

Approval Holder:

Esco International

Company Name

Esco International

Address

Unit 8 Cae Ffwt Business Park Pendraw'r Llan Road Glan Conwy

Country

LL28 5SP

View All Listings by this Company

'IUPITAL F30-EW'. Natural, (appears white coloured - opaque), injection moulded POM material. For use with water up to 85°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250455012

Expiry date:

30/04/2030

Approval Holder:

Global Polyacetal Co., Ltd.

Company Name

Global Polyacetal Co., Ltd.

Address

Shiodome Sumitomo-Building 25F 1-9-2, Higashi-shinbashi, Minato Ward, Tokyo 105-0021

Country

Japan

View All Listings by this Company

'ANUBIT HB-1000'. Factory applied, black coloured bitumen coating. Apply as per manufacturer's TDS 'AE-TDS-023-2021', dated '02.08.2024'. Please note that use of a thinner isn't covered by the scope of this approval. Cure for 40 minutes@30°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

250355071

Expiry date:

31/03/2030

Approval Holder:

Anupam Enterprises

Company Name

Anupam Enterprises

Address

113, Park Street 5th Floor, Block-B, Kolkata, 700 016, West Bengal

Country

India

View All Listings by this Company