Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250504028

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass) bodies. The flow is controlled via a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a thermostatic cartridge. The products incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets incorporate a stainless-steel strainer. The products are supplied with spherical valves for both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:: 0685 Combination Tap Assembly
Section Subtitle:: Tap(s) with a non-touch method of flow control incorporating temperature control.
WRAS Approval Number:: 250504028
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” Male BSP.
Marking:: IDRAL on operating member. Model number and date (WW/YY) on underside of tap.
Installation Requirements:: R001 R010 R040
Expiry date:: 31/05/2030
Model:: 09125/3R - WALL MOUNTED TAP (MAINS OPERATED) I90H1-01000 - WALL MOUNTED REMOVABLE SPOUT TAP (MAINS OPERATED) I90H1-00000 - WALL MOUNTED REMOVABLE SPOUT TAP (BATTERY OPERATED) 09125/3 - WALL MOUNTED TAP (BATTERY OPERATED)

Approval Holder:: Idral S.p.A.

Company Name
Idral S.p.A.
Address
Via Isei, 8/10 - I-28010 Gargallo (NO)
Country
Italy
Phone
+39 0322 912017

View All Listings by this Company

WRAS Approval Number: #251002002

Range of combined bath fillers and overflow waste assemblies with plastic bodies (various finishes). The outlet incorporates a plastic aerator. The products are supplied with a cable operated pop-up waste. Maximum operating temperature 60°C.

Section:: 0690 Combination Tap Assemblies
Section Subtitle:: Combined bath filler and overflow(s).
WRAS Approval Number:: 251002002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided EPDM lined flexible hose assembly with a ½” BSP (F) captive nut end connection.
Marking:: C.G.S. S.r.l logo on waste operating member
Installation Requirements:: R001 R576
Expiry date:: 31/10/2030
Model:: 122YY.XX 132YY.XX YY = Length 122.XX Exact 55 cm 132.XX Exact 55 cm 122-1.XX Max. 70 cm 132-1.XX Max. 70 cm 122-2.XX Max. 80 cm 132-2.XX Max. 80 cm 122-3.XX Max. 90 cm 132-3.XX Max. 90 cm 122-4.XX Max. 105 cm 132-4.XX Max. 105 cm 122-5.XX Max. 115 cm 132-5.XX Max. 115 cm 122-6.XX Max. 125 cm 132-6.XX Max. 125 cm XX = Finish 122YY.01 Standard Chrome 132YY.01 Standard Chrome 122YY.05 PVD Chrome 132YY.05 PVD Chrome 122YY.06 Black Chrome 132YY.06 Black Chrome 122YY.12 Gold 132YY.12 Gold 122YY.15 Rose Gold 132YY.15 Rose Gold 122YY.17 PVD Gold 132YY.17 PVD Gold 122YY.25 Brushed Bronze 132YY.25 Brushed Bronze 122YY.26 Brushed Copper 132YY.26 Brushed Copper 122YY.33 White Matt 132YY.33 White Matt 122YY.35 White 132YY.35 White 122YY.43 Black Matt 132YY.43 Black Matt 122YY.40 Brushed Nickel 132YY.40 Brushed Nickel 122YY.45 Black 132YY.45 Black

Manufacturer:: C.G.S. S.R.L.

Company Name
C.G.S. S.R.L.
Address
Via Torino 9/A Cureggio (NO)
Postcode
28060
Country
Italy

View All Listings by this Company

WRAS Approval Number: #250788014

Shower kit comprising of a shower hose, handset and a flow regulator. Open outlet use only. Maximum operating temperature 65°C.

Section:: 1670 Shower Outlets
Section Subtitle:: Shower kit(s)
WRAS Approval Number:: 250788014
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP conical nut
Marking:: Shower Hose – Aqualisa Shower handset – Aqualisa
Installation Requirements:: R001 R040
Expiry date:: 31/07/2030
Model:: ACY1010.ECO

Approval Holder:: Aqualisa Products Ltd.

Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

WRAS Approval Number: #250815301

Section:: 2052 Diverter
Description:: A Range of Diverter(s) incorporating manual control
Plastic body/bodies
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001
Expiry date:: 31/08/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
TC28		27.98mm	10 bar	85 °C	WANHAI, WRAS, TC28, Production date (DD/MM/YYYY)	Body	No
TC28-1		27.98mm	10 bar	85 °C	WANHAI, WRAS, TC28-1, Production date (DD/MM/YYYY)	Body	No

Product Images

Approval Holder:: Ningbo Wanhai Cartridge Technology Co. Ltd.

Company Name
Ningbo Wanhai Cartridge Technology Co. Ltd.
Address
Xiachen Development Zone, Chunhu, Fenghua
Country
Zhejiang, China

View All Listings by this Company
Manufacturers:: Ningbo Wanhai Cartridge Technology Co

WRAS Approval Number: #250815306

Section:: 0440 Headworks
Description:: A Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
Brass body/bodies
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001
Expiry date:: 31/08/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
XDSV12		BSP 1/2" (M)	16 bar	85 °C	Company logo	Body	No

Product Images

Approval Holder:: ZHEJIANG XINDONG SANITARY WARE CO.,LTD.

Company Name
ZHEJIANG XINDONG SANITARY WARE CO.,LTD.
Address
XUANMEN INDUSTRIAL ZONE YUHUAN CHINA
Country
CHINA

View All Listings by this Company
Manufacturers:: Zhejiang Xindong Sanitary Ware Co., Ltd