521 Range of pressure switches with stainless steel bodies (1.4305 / AISI 303 or 1.4404 / AISI 316L see model) and EPDM ‘O’-rings. Maximum working pressure range 0-60.0 bar (see model). Maximum operating temperature 99°C

Section:

1720 Switches

Section Subtitle:

Pressure operated.

WRAS Approval Number:

2005022

Size:

See model.

Marking:

Huba Control, model number and date of manufacture (YY/MM).

Installation Requirements:

R001

Expiry date:

31/05/2025

Model:

521 Range: 521.914 S X X X X X X X (pressure range 0 - 2.5 bar), 521.915 S X X X X X X X (pressure range 0 - 4.0 bar), 521.917 S X X X X X X X (pressure range 0 - 6.0 bar), 521.930 S X X X X X X X (pressure range 0 - 10.0 bar), 521.931 S X X X X X X X (pressure range 0 - 16.0 bar), 521.932 S X X X X X X X (pressure range 0 - 25.0 bar), 521.933 S X X X X X X X (pressure range 0 - 40.0 bar), 521.940 S X X X X X X X (pressure range 0 - 60.0 bar). Where: 1st X = Version: 0 = Standard 1 = Oxygen applications 2nd X = Switching contact: 1 = Contact N/O High-Side-Switch PNP 2 = Contact N/C High-Side-Switch PNP 3rd X = Electrical connection: 0 = Swift connector without cable 3 = Connector M12x1 2 L = Swift connector with cable 1.5 m 4th X = Pressure connection, inside thread versions: 0 = 7/16 -20 UNF sealing cone with Schrader K = 7/16 -20 UNF 1 = G ¼ with O-Ring seal FPM D = ½ -14 NPT (< 60 bar) Outside thread versions: E = M20x1.5 sealed at front and manometer (combi) 2 = 7/16 -20 UNF sealing cone 3 = ¼ -18 NPT, 4 = G ¼ sealed at back DIN 3852-E with Profile seal ring in FPM 7 = R ¼ acc. to EN 10226 8 = G ½ sealed at back and manometer with Profile seal ring in FPM 9 = G ½ sealed at front 5th X = Pressure tip orifice: Without = 0 With = 2 6th X = Material pressure connection: N = Stainless steel 1.4305 / AISI 303 1 = Stainless steel 1.4404 / AISI 316L 7th X = Switching points: W = Indicates switching points (e.g.: W100/60bar).

Approval Holder:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

Manufacturer:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

Flow through valve (chromium plated brass) incorporating EPDM ‘O’-rings, PTFE seals, a drain valve, isolation valve and water mixing feature for connection to expansion vessels. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2005329

Size:

1” BSP (M) x 1” BSP (F)

Marking:

Global Water Solutions, model, PN and date of manufacture (YYWW) on body.

Installation Requirements:

R001

Expiry date:

31/05/2025

Model:

IFP-100B

Approval Holder:

Global Water Solutions Ltd.

Company Name

Global Water Solutions Ltd.

Address

5th Floor, 37 Esplanade, St. Helier Jersey The Channel Islands

Postcode

JE1 2TR

Country

United Kingdom

Phone

+886 4 2622 0078

General Email

adam@globalwatersolutions.com

View All Listings by this Company

Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headwork with either cross top, single lever or dome type operating members. The DLT SPEC103 model is supplied with metal backnuts. All other models are supplied with plastic backnuts. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2006806

Size:

½” BSP (M)

Marking:

DTC 34 (brand of Methven) on body

Installation Requirements:

R001 R006

Expiry date:

30/06/2025

Model:

DLT103, DLT SPEC103, KEE DLT103, KEE DLT103-4, VW DLT103, 208.0574.211, DLV103, CNTL03, KEE CNTL03 & 60177003.

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks, and various operating members. The spout outlet incorporates a plastic flow straightener. Fittings are supplied with either brass or plastic backnuts depending on model. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2005313

Size:

¾” BSP (M)

Marking:

DTC on rear of body.

Installation Requirements:

R001 R040

Expiry date:

31/05/2025

Model:

CNTL02 EXG5052 DLT102 DLV102 DLT SPEC102 (brass backnuts) KEE DLT102 (brass backnuts) VW DLT102 (brass backnuts)

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of pillar taps having brass bodies (chromium plated) and non-concussive headworks with dome type operating members. The outlet incorporates a plastic aerator and the product is supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2005338

Size:

½” BSP (M)

Marking:

Vado on body.

Installation Requirements:

R001 R006

Expiry date:

31/05/2025

Model:

PRO – 367/SB-C/P PRO – 367/SB-EW-C/P

Approval Holder:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company

Manufacturer:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company