Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #251102033

Wall mounted, fixed, spout outlet (brass bodies – various finishes) incorporating a plastic flow straightener. Maximum operating temperature 60°C Maximum working pressure: Open outlet use only

Section:: 0695 Combination Tap Assemblies
Section Subtitle:: Spout outlet(s).
WRAS Approval Number:: 251102033
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: Villeroy & Boch 1748 on faceplate
Installation Requirements:: R001 R040
Expiry date:: 30/11/2030
Model:: TVT116001000XX Where XX denotes the finish and can be replaced with the following: 61 – Chrome K5 - Matt black 76 - Brushed gold 64 - Brushed nickel

Approval Holder:: Villeroy & Boch AG

Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

WRAS Approval Number: #251102306

Section:: 1660 Shower Outlets
Description:: A Range of Shower hose(s)
Nylon braided hose with TPSiV inner liner.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
30 090 8xx	Various	G 1/2"	10 bar	65 °C	AXOR	on the nut	Yes	Not applicable	Not Applicable	Not Applicable	Shower Hose,

Notes & Further Information: Where 8xx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #251102030

Range of shower kits with a shower hose, handset and shower rail. Open outlet use only Maximum operating temperature 60.0°C

Section:: 1670 Shower Outlets
Section Subtitle:: Shower kit(s)
WRAS Approval Number:: 251102030
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP Captive nut.
Marking:: Villeroy & Boch on handset & shelf.
Installation Requirements:: R001 R040
Expiry date:: 30/11/2030
Model:: TVS110002000XX TVS110003000XX Where XX denotes the finish and can be replaced with either: 61 = Chrome K5 = Black

Approval Holder:: Villeroy & Boch AG

Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

WRAS Approval Number: #251108004

Range of wall mounted, manually operated, concealed blending shower valves (stainless steel bodies – various finishes) incorporating a ceramic cartridge headwork, with single lever operating member and 2 or 3-way diverter, controlling the flow and temperature. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 2001 Shower Valves
Section Subtitle:: Shower valve(s) with manual temperature control , incorporating a manual diverter between outlets.
WRAS Approval Number:: 251108004
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” NPT (F).
Marking:: BAGNODESIGN on faceplate ring.
Installation Requirements:: R001 R010 R040
Expiry date:: 30/11/2030
Model:: BDM-STU-411-XX Studio 316 wall mounted concealed shower mixer with two-way diverter. BDM-STU-412-XX Studio 316 wall mounted concealed shower mixer with three-way diverter. XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

WRAS Approval Number: #251108006

Range of concealed, manually operated blending valves (brass bodies - various finishes), incorporating a ceramic cartridge headwork controlling the flow and temperature, a manually operated diverter to shower outlet with lever type operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:: 2001 Shower Valves
Section Subtitle:: Shower valve(s) with manual temperature control , incorporating a manual diverter between outlets.
WRAS Approval Number:: 251108006
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (F).
Marking:: Coalbrook logo on the shroud.
Installation Requirements:: R001 R020
Expiry date:: 30/11/2030
Model:: XX 3006 YY. First two letters (e.g. XX) – These are replaced with letters representing the name of the trim (handles). The number of letters will depend on the name of the trim. Examples are, but not limited to: ZU - which represents the name Zurich. DO - which represents the name Domo. DC - which represents the name Decca. Middle four numbers (e.g. 3006) – This is the numeric code allocated to the model and remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are but not limited to: BN - Brushed Nickel, CP - Chrome, GM - Gunmetal, BB - Brushed Brass.

Approval Holder:: Davroc Limited

Company Name
Davroc Limited
Postcode
EN11 0QS
Country
United Kingdom
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

WRAS Approval Number: #251112301

Section:: 2011 Shower Valves
Description:: A Range of Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.
Wall Mounted Undefinable Air Gap – See IRN’s Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R020 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork
SH-T8089D-**	Various	¾” to ½” Offset Unions.	5 bar	75 °C	SHANHU	BODY	No	1/4 Turn ceramic disk
SH-T8089-**	Various	¾” to ½” Offset Unions.	5 bar	75 °C	SHANHU	BODY	No	1/4 Turn ceramic disk
SH-T80810-**	Various	¾” to ½” Offset Unions.	5 bar	75 °C	SHANHU	BODY	No	1/4 Turn ceramic disk
SH-T80810D-**	Various	15mm compression union	5 bar	75 °C	SHANHU	BODY	No	1/4 Turn ceramic disk

Notes & Further Information: -**Represents the following different surface treatments: 1.PB-ARTISAN BRASS 2.EB-Matte black 3.CP-CHROME

Product Images

Approval Holder:: ZHEJIANG CORAL SANITARY CO., LTD

Company Name
ZHEJIANG CORAL SANITARY CO., LTD
Address
KEYUAN ROAD NO.23.HUXIN INDUSTRIAL AREA CHUMEN TOWN, YUHUAN CITY, 317600
Postcode
317605
Country
China
Phone
0086-15888667668
General Email
wendy@coralbathroom.com

View All Listings by this Company
Manufacturers:: ZHEJIANG CORAL SANITARY CO., LTD

WRAS Approval Number: #251115305

Section:: 2011 Shower Valves
Description:: A Range of Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.
Wall Mounted Concealed. Undefinable Air Gap – See IRN’s Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R020
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
JD-AT2**	Various	BSP 1/2" (F) x BSP 3/4" (F)	10 bar	60 °C	Kind	Body	No	1/2 Turn ceramic disk	Not Applicable	Not Applicable
JD-AT3**	Various	BSP 1/2" (F) x BSP 3/4" (F)	10 bar	60 °C	Kind	Body	No	1/2 Turn ceramic disk	Not Applicable	Not Applicable

Notes & Further Information: Note: ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251105301

Section:: 2004 Shower Valves
Description:: A Range of Shower valve(s) with manual temperature control, incorporating a self-cancelling diverter with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3).
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R030 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Wastes
TVS106353110xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS103353000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVT127001000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS112003000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS125003000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS104353000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS107005000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS106353113xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVT111001000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS122002000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS108008000xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS105353110xx	null	1/2" F	10 bar	60 °C	V&B Logo	Operating Member	Yes	Ceramic cartridge	null	null	null
TVS00035100000	null	1/2" F	10 bar	60 °C	null	null	Yes	Ceramic cartridge	null	null	null

Notes & Further Information: TVS00035100000 – Vi-Box is used in conjunction with all of the models. Where xx denotes the surface finish (which is a non-water contact part) 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite

Approval Holder:: Villeroy & Boch AG

Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

WRAS Approval Number: #251102307

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck mounted Stainless steel Braided PEX lined flexible hose assemblies incorporating 3/8 captive nut end connections. Supplied with a click type waste - not verified by test. Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Wastes
71 052 xx0	various	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator
71 051 xx0	various	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator	Click Type
71 053 xx0	various	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator
71 054 xx0	various	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator	Click Type
71 055 xx0	various	G 3/8	10 bar	60 °C	hansgrohe	on the handle	Yes	Ceramic cartridge	C-plate	Aerator

Notes & Further Information: Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturers:: Hansgrohe d.o.o.

WRAS Approval Number: #251116302

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted. Capable of achieving AUK3 Tap Gap. Stainless Steel braided EPDM lined inlet hoses. R160 applies to model 91202 only.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010 R160
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
32002	chromium plated	½” BSF (F) Captive nut	10bar bar	60℃ °C	Bokeya	on body	No	Ceramic cartridge	C-plate	Aerator
41202	chromium plated	½” BSF (F) Captive nut	10bar bar	60℃ °C	Bokeya	on body	No	Ceramic cartridge	C-plate	Aerator
41802	chromium plated	½” BSF (F) Captive nut	10bar bar	60℃ °C	Bokeya	on body	No	Ceramic cartridge	C-plate	Aerator
41802L	chromium plated	½” BSF (F) Captive nut	10bar bar	60℃ °C	Bokeya	on body	No	Ceramic cartridge	C-plate	Aerator
81202	chromium plated	½” BSF (F) Captive nut	10bar bar	85℃ °C	Bokeya	on body	No	Ceramic cartridge	C-plate
81202L	chromium plated	½” BSF (F) Captive nut	10bar bar	85℃ °C	Bokeya	on body	No	Ceramic cartridge	C-plate
81402	chromium plated	½” BSF (F) Captive nut	10bar bar	85℃ °C	Bokeya	on body	No	Ceramic cartridge	C-plate
81402L	chromium plated	½” BSF (F) Captive nut	10bar bar	85℃ °C	Bokeya	on body	No	Ceramic cartridge	C-plate
91202	chromium plated	½” BSF (F) Captive nut	10bar bar	85℃ °C	Bokeya	on body	No	Ceramic cartridge	C-plate

Approval Holder:: Yuhuan Bokeya Sanitary Ware Technology Co., Ltd.

Company Name
Yuhuan Bokeya Sanitary Ware Technology Co., Ltd.
Address
Saozhoushan Industrial Zone Qinggang Town, Yuhuan, Zhejiang
Postcode
317600
Country
China
General Email
105069040@qq.com

View All Listings by this Company
Manufacturers:: YUHUAN BOKEYA SANITARY WARE TECHNOLOGY CO., LTD.