Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #241002058

Range of screw down stop valves with brass bodies, EPDM gaskets and PTFE washers. For use with copper pipe to EN 1057. Maximum working pressure 16.0 Bar. Maximum operating temperature 99°C.

Section:: 2310 Valves
Section Subtitle:: Stop, metal, screw down.
WRAS Approval Number:: 241002058
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm compression fittings inlet and outlet, 22mm compression fittings inlet and outlet.
Marking:: MB, size and flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: CMTFST-15 & CMTFST-22.

Product Images

WRAS Approval Number: #240908004

STAD range of balancing valves with brass bodies, PTFE sliding washer and EPDM O-rings. Models are available with or without a drain port. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 240908004
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 3/8” BSP (F x F) (DN10) – 2” BSP (F x F) (DN50).
Marking:: IMI, TA, pressure rating, size and CE marking cast on body. IMA , TA, STAD*, DN and logo located on handwheel.
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: Global without drain: DN10 - 52851010, DN15 - 52851015, DN20 - 52861020, DN25 - 52851025, DN32 - 52851032, DN40 - 52851040, DN50 - 52851050. Global with drain ¾”: DN10 - 52851610, DN15 - 52851615, DN20 - 52851620, DN25 - 2552851625, DN32 - 52851632, DN40 - 52851640, DN50 - 52851650. Nordic without drain: DN10 - 52851110, DN15 - 52851115, DN20 - 52851120, DN25 - 52851125, DN32 - 52851132, DN40 - 52851140, DN50 - 52851150. Nordic with drain ½”: DN10 - 52851210, DN15 - 52851215, DN20 - 52851220, DN25 - 52851225, DN32 - 52851232, DN40 - 52851240 DN50 - 52851250.

Product Images

Approval Holder:: IMI international Sp. z.o.o.

Company Name
IMI international Sp. z.o.o.
Address
Olewin 50A, 32-300 Olkusz, Poland

View All Listings by this Company

WRAS Approval Number: #2201109

Range of regulating valves with blue epoxy coated ductile iron bodies incorporating EPDM gaskets and hand wheel operating member. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 2201109
Size:: DN65 - DN300 flanged inlet and outlet connections
Marking:: Vantec, PN, DN, WRAS and other technical information on name plate on body. DN, PN, and flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: VA1209

Approval Holder:: Vantec Industrial

Company Name
Vantec Industrial
Address
128, City Road, London
Postcode
EC1V 2NX
Country
United Kingdom
Phone
+971543038194
General Email
A.OMER@VANTECINDUST.CO.UK

View All Listings by this Company

WRAS Approval Number: #241004036

Range of in line regulating valves with brass bodies, EPDM `O` rings. The valves incorporate a non-rising spindle headwork for temperature regulation. Max working pressure: See models. max operating temperature: See models.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 241004036
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see models
Marking:: Marking T-Just, DN, flow arrow, FlowCon, (H), (D), production year in date clock YY
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: A15.l DN15 – Valve Housing – 25 bar 120oC, A20.l DN20 – Valve Housing – 25 bar 120oC, A25.l DN25 – Valve Housing – 25 bar 120oC. Above models for use with: T-JUST - Thermostatic valve insert - 10 bar 85oC. When valve housing and insert are used in combination, 10 bar 85oC only.

Product Images

Approval Holder:: Flowcon International APS

Company Name
Flowcon International APS
Address
Traficenter Alle Slagelse
Postcode
Denmark

View All Listings by this Company

WRAS Approval Number: #2205103

Range of UV disinfection units with stainless steel bodies and EPDM seals. The UV lamps are housed inside quartz tubes. Maximum working pressure 10.3 bar. Maximum operating temperature 40°C.

Section:: 2411 Disinfection Equipment
Size:: Please refer to model.
Marking:: Atlas UV (Brand of Wycombe Water) on adhesive label on body.
Installation Requirements:: R001 R120 R150 R170 R290
Expiry date:: 31/05/2027
Model:: L8 (½” female NPT). L12 & L41 (½” male NPT). L22 (¾” male NPT). L57 & L79 (1” male NPT). H15 & H38 (¾” male NPT). H53 & H95(1” male NPT) H151 (1½” male NPT inlet and outlet).

Approval Holder:: Wycombe Water Ltd.

Company Name
Wycombe Water Ltd.
Address
6 Premus Coldharbour Way, Aylesbury HP19 8AP Aylesbury Bucks
Postcode
HP19 8AP
Country
United Kingdom
Phone
01480355446
General Email
sales@uvo3.co.uk

View All Listings by this Company

WRAS Approval Number: #240155050

'EP703904 'O' rings'. Black coloured, injection moulded EPDM 'O' rings. Shore hardness 70. Tested in-radius size between 0.5mm & 3.0mm. 'EP703904 Gasket Seal Rings’ were added to the approval in June 2024. Black coloured, injection moulded EPDM gasket seal rings. Shore hardness 70. Tested in-radius size between 0.75mm & 2.0mm. For use with water up to 85°C.

Section:: 5360 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:: 240155050
Expiry date:: 31/01/2029

Approval Holder:: Freudenberg Industrial Services GmbH

Company Name
Freudenberg Industrial Services GmbH
Address
Albert-Schweitzer-Ring 1, 22045 Hamburg
Country
Germany

View All Listings by this Company

WRAS Approval Number: #250355005

'EP11/8/3 BLK'. Black coloured, injection moulded EPDM 'O' rings. Shore hardness 80. Tested in-radius size 1.3mm. For use with water up to 85°C.

Section:: 5360 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:: 250355005
Expiry date:: 31/03/2030

Approval Holder:: Superior Seals Ltd.

Company Name
Superior Seals Ltd.
Address
Nimrod Way, Ferndown Industrial Estate, Ferndown, Dorset
Postcode
BH21 7SH
Country
UK
Phone
01202 854 300
General Email
sales@superiorltd.com

View All Listings by this Company

WRAS Approval Number: #240955030

'EP701443C 'O' rings'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 70. Tested in-radius size 1.75mm. For use with water up to 85°C.

Section:: 5360 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:: 240955030
Expiry date:: 30/09/2029

Approval Holder:: Fannteer Corporation

Company Name
Fannteer Corporation
Address
2F, No. 77, Zhouzi Street, Neihu District, Taipei City 114680
Country
Taiwan
Phone
+886 2 2577 4691
General Email
info@fannteer.com.tw

View All Listings by this Company

WRAS Approval Number: #240955045

‘E27 EPDM moulded parts'. Black coloured, injection moulded EPDM seals. Shore hardness 75. Tested in-radius size between 0.8mm & 4.0mm. For use with water up to 85°C.

Section:: 5360 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:: 240955045
Expiry date:: 30/09/2029

Approval Holder:: EagleBurgmann Germany GmbH & Co. KG

Company Name
EagleBurgmann Germany GmbH & Co. KG
Address
Aeussere Sauerlacher Str. 6-10, D-82515 Wolfratshausen
Country
Germany

View All Listings by this Company

WRAS Approval Number: #241055023

'WRC EPDM 92645'. Black coloured EPDM liner manufactured by calendaring. Shore hardness 80 A. Tested in-radius size 0.5mm. For use with water up to 23°C.

Section:: 5360 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:: 241055023
Expiry date:: 31/10/2029

Approval Holder:: SealEco AB

Company Name
SealEco AB
Address
Kävsjövägen 38, 331 35 Värnamo
Country
Sweden

View All Listings by this Company