Directory Search Results

Print List

#2110322

Range of 5 way inlet control group assembly incorporating a DZR brass body incorporating a pressure reducing valve, with an adjustable outlet pressure range of either 3.0 bar, 3.5 bar, or 6.0 bar and a safety relief valve set at either 6.0 bar or 8.0bar (depending on model). The product incorporates an inline single check valve cartridge after the balanced cold take off, verified by test (suitable for backflow protection against Fluid Category 2). Maximum supply pressure 10.0 bar. Maximum operating temperature 85°C

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2110322
Size:
28mm compression
Marking:
Caleffi, Caleffi Logo, size, Flow arrowand CR cast on body
Installation Requirements:
R001 R120
Expiry date:
31/10/2026
Model:
535101H 535102H 535103H 535104H 535105H
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#2110029

Range of adjustable, pilot operated, pressure reducing control valves with black plastic bodies, EPDM diaphragm, EPDM ‘O’-rings and NBR seals. The products are supplied with auxiliary stainless-steel tubing, lever operated spherical valves, integral stainless-steel strainer, pilot valve and a quarter turn ceramic disc valve. Maximum inlet supply pressure 16.0 bar. Maximum outlet pressure 0 - 8.5 bar, 7.0 - 13.5 bar or 12.0 - 16.0 bar (see model). Maximum operating temperature 60°C.

Section:
2205 Valves
Section Subtitle:
Pressure reducing, pilot operated.
WRAS Approval Number:
2110029
Size:
DN50 - DN300 flanged.
Marking:
Oxford Flow logo, year of manufacture (YYYY) and technical information on adhesive labels on control block and pilot valve. Flow arrow on body of control block.
Installation Requirements:
R001 R120
Expiry date:
31/10/2026
Model:
IP Series: IP-**0B*AAA0E000000F Where: ** = size: 05 = 50mm/2”, 08 = 80mm/3”, 10 = 100mm/4”, 15 = 150mm/6”, 20 = 200mm/8”, 25 = 250mm/10”, 30 = 300mm/12”. * = adjustable pressure range: H = 0 - 8.5 bar, I = 7.0 - 13.5 bar, J = 12.0 - 16.0 bar.
Product Images

Approval Holder:
Oxford Flow
Company Name
Oxford Flow
Address
Osney Mead Oxford
Postcode
OX2 0ES
Phone
01865595248
General Email
INFO@OXFORD-FLOW.COM

View All Listings by this Company

Print This Approval


#2201805

Range of pre-set, spring loaded, angled pressure relief valves with plastic body and EPDM diaphragm. The valves are fitted with rotary type easing gear . For maximum working pressure please refer to model. Maximum operating temperature 99°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
2201805
Size:
SEE MODEL
Marking:
Caleffi logo, flow arrow and DN mould on body Date of manufacture (WWYY) and pressure printed on body Pressure printed on cap
Installation Requirements:
R001 R200
Expiry date:
31/01/2027
Model:
Series 253 ½” BSP (F) 253040 – Preset at 10.0 bar 253042 – Preset at 2.5bar 253043 – Preset at 3.0 bar 253044 – Preset at 4.0 bar 253046 – Preset at 6.0 bar 253048 – Preset at 8.0 bar 253040 TAK – Preset at 10.0 bar 253042 TAK – Preset at 2.5bar 253043 TAK – Preset at 3.0 bar 253643 VIS – Preset at 3.0 bar 253044 TAK – Preset at 4.0 bar 253046 TAK – Preset at 6.0 bar 253546 TXH – Preset at 6.0 bar 253048 TAK – Preset at 8.0 bar Series 253 ¾” BSP (F) 253050 – Preset at 10.0 bar 253052 – Preset at 2.5bar 253053 – Preset at 3.0 bar 253054 – Preset at 4.0 bar 253056 – Preset at 6.0 bar 253058 – Preset at 8.0 bar 253156 CST – Preset at 6.0 bar Series 2531 ½” BSP (F) 253140 CST – Preset at 10.0 bar 253140 – Preset at 10.0 bar 253142 – Preset at 2.5bar 253143 CST – Preset at 3.0 bar 253143 – Preset at 3.0 bar 253144 CST – Preset at 4.0 bar 253144 – Preset at 4.0 bar 253146 CST – Preset at 6.0 bar 253146 VIS – Preset at 6.0 bar 253148 CST – Preset at 8.0 bar 253148 – Preset at 8.0 bar 253246 CST – Preset at 6.0 bar Series 2531 ½” BSP (M) 253344 VIS – Preset at 4.0 bar 253346 CST – Preset at 6.0 bar 253346 VIS – Preset at 6.0 bar 253646 CST – Preset at 6.0 bar 253704 VIS – Preset at 4.0 bar Series 2534 ½” BSP (M) 253443 – Preset at 3.0 bar

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#2110069

Range of pre-set pressure relief valves with bronze bodies and EPDM seating discs. Available with either a manual lever or dome type sealed cap. Pre-set relief pressures: DN15 and DN40 valves: 0.35 bar to 15.9 bar. DN20 valves: 0.35bar to 13.8bar. DN25, DN32 and DN50 valves: 0.35 bar to 12.5 bar. Maximum operating temperature 85°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
2110069
Size:
DN15 valves = ½” BSP (M) or (F). DN20 valves = ¾” BSP (M) or (F) or flanged. DN25 valves = 1” BSP (M) or (F) or flanged. DN32 valves = 1 ¼” BSP (M) or (F) or flanged. DN40 valves = 1 ½” BSP (M) or (F) or flanged. DN50 valves = 2” BSP (M) or (F) or flanged.
Marking:
EMERSON AUTOMATIONS, BAILEY, CE, maximum temperature, maximum pressure and other info on data plate on body. PN and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/10/2026
Model:
Fig 707 Code example 707 “X” “X” E “X” 1st “X” = 1 - (DN15), 2 - (DN20), 3 - (DN25), 4 - (DN32), 5 - (DN40), 6 - (DN50). 2nd “X” = 1 - (M) x (F) BSP, 2 - (F) x (F) BSP, 5 - PN25 Flange. 3rd “X” = L - Marine lever, D - Dome.
Product Images

Approval Holder:
Emerson Automation Solutions Final Control UK Ltd
Company Name
Emerson Automation Solutions Final Control UK Ltd
Address
Sharp Street Worsley Manchester
Postcode
M28 3NA
Phone
0161 709 7741
General Email
safetysystemssupport@pentair.com

View All Listings by this Company
Manufacturer:
Emerson Automation Solutions Final Control UK Ltd
Company Name
Emerson Automation Solutions Final Control UK Ltd
Address
Sharp Street Worsley Manchester
Postcode
M28 3NA
Phone
0161 709 7741
General Email
safetysystemssupport@pentair.com

View All Listings by this Company

Print This Approval


#2110013

Range of latching and normally closed (see model) solenoid valves with plastic bodies, NBR diaphragms and ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2110013
Size:
M24 (M)
Marking:
Serie Micro, RPE website, minimum and maximum working pressure, and technical specifications on top of valve body.
Installation Requirements:
R001 R008
Expiry date:
31/10/2026
Model:
MICRO Series: Latching - 3, 4.5 & 6V Normally Closed - 12V.
Product Images

Approval Holder:
R.P.E. Srl.
Company Name
R.P.E. Srl.
Address
Via S. Abrogio, 1,3,5 22070 Carbonate (CO) Italy
Phone
+39 0331.832515

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 187 of 1241

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.