Directory Search Results

Print List

#241004715

Range of in-line electrolytic scale reducers with copper bodies for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 40°C.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm & 22mm compression.
Marking:
Gaobo & WRAS on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
31/10/2029
Model:
7568050511 & 7568062211 (15mm compression). 7568086211 (22mm compression).
Product Images

Manufacturer:
Zhejiang Gaobo Sanitary Wares Co Ltd
Company Name
Zhejiang Gaobo Sanitary Wares Co Ltd
Address
Xiaqiu, Yuhuan Sci-Tech Industrial Area, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#241004729

In-line polyphosphate scale inhibitor. The product is supplied with a single check valve cartridge in the inlet connection, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Cold water use only.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm compression
Marking:
BWT and product info on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
31/10/2029
Model:
AC002200 BWT Combi Care
Product Images

Manufacturer:
BWT Holding GmbH
Company Name
BWT Holding GmbH
Address
Walter-Simmer-Straße 4 Mondsee
Postcode
5310
Country
Austria
Phone
+436648172152

View All Listings by this Company

Print This Approval


#2205103

Range of UV disinfection units with stainless steel bodies and EPDM seals. The UV lamps are housed inside quartz tubes. Maximum working pressure 10.3 bar. Maximum operating temperature 40°C.

Section:
2411 Disinfection Equipment
Size:
Please refer to model.
Marking:
Atlas UV (Brand of Wycombe Water) on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
31/05/2027
Model:
L8 (½” female NPT). L12 & L41 (½” male NPT). L22 (¾” male NPT). L57 & L79 (1” male NPT). H15 & H38 (¾” male NPT). H53 & H95(1” male NPT) H151 (1½” male NPT inlet and outlet).

Approval Holder:
Wycombe Water Ltd.
Company Name
Wycombe Water Ltd.
Address
6 Premus Coldharbour Way, Aylesbury HP19 8AP Aylesbury Bucks
Postcode
HP19 8AP
Country
United Kingdom
Phone
01480355446
General Email
sales@uvo3.co.uk

View All Listings by this Company

Print This Approval


#241055017

'JSAW-JAL'. Factory applied, grey coloured ordinary portland cement. Mix cement, sand & water in a 1:1.5:0.5 weight ratio and apply as per work instructions 'JSAW/SMG/DISP/PRO/WI-11', version '3.3', effective date '15.04.2024'. Cure for 2.5 hours@48°C and then 3 days@30°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
241055017
Expiry date:
31/10/2029

Approval Holder:
M/s Jindal Saw Limited
Company Name
M/s Jindal Saw Limited
Address
Village Samaghogha Paragpar Mandvi Road Taluka Mundra District Kutch Gujarat 370415
Country
India

View All Listings by this Company

Print This Approval


#241055021

'JSAW-JAL (OPC-JKL)'. Factory applied, grey coloured ordinary portland cement. Mix cement, sand & water in a 1:1.5:0.5 weight ratio and apply as per work instructions 'JSAW/SMG/DISP/PRO/WI-11', version '3.3', effective date '15.04.2024'. Cure for 2.5 hours@48°C and then 3 days@30°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
241055021
Expiry date:
31/10/2029

Approval Holder:
M/s Jindal Saw Limited
Company Name
M/s Jindal Saw Limited
Address
Village Samaghogha Paragpar Mandvi Road Taluka Mundra District Kutch Gujarat 370415
Country
India

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1854 of 2243

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.