Directory Search Results

Print List

#241002071

Range of wall mounted concealed thermostatic blending valves with (brass bodies - various finishes,). The product incorporates a manual diverter valve which can be limited to control the flow between 1, 2 or 3 outlets, a separate thermostatic cartridge controls the temperature. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002071
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The valves are available in 1-, 2- and 3-way versions. The 1 and 2-way valves have a physical stop fitted to limit the diverter rotation and there are the corresponding number of dots on the cover plate. ie Off + 1 dot for the 1-way; Off + 2 dots for the 2-way and Off + 3 dots for the 3-way. The actual valve is the same in all cases.
Size:
3/4" BSP (F) inlets x 1/2" BSP (F) Outlets
Marking:
Tissino on faceplate
Installation Requirements:
R001 R040
Expiry date:
31/10/2029
Model:
Concealed valve TTB-100 Thermobox shower valve Face-plate and Handle set TMA-115-P (3 outlet model, chrome) TMA-116-P (1 outlet model, chrome) TMA-117-P (2 outlet model, chrome TLC-202-xx-P (3 outlet model, various finishes) TLC-203-xx-P (1 outlet model, various finishes) TLC-204-xx-P (2 outlet model, various finishes) Where ‘xx’ shown, this denotes the surface finish and can be replaced with any of the following surface finish designations, for example: MN = Matt Black BB = Brushed Brass
Product Images

Approval Holder:
Tissino Ltd.
Company Name
Tissino Ltd.
Address
Unit 2 A Lyncastle Road Appleton Thorn Warrington
Postcode
WA4 4SN
Country
Cheshire

View All Listings by this Company

Print This Approval


#241002077

Range of plastic smart box blending valves, incorporating a brass flow meter with or without an insulated body (see models). The products incorporate a non-return valve. For use with Polybutylene Barrier Pipe (manufactured to BS EN 7291-2:2010 ) and PEX Barrier Pipe (manufactured to BS EN 7291-3:2010) and Copper Pipe (manufactured to BS EN1057) Maximum working pressure 3.0 Bar. Maximum operating temperature 65.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002077
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Nexus Omega will not be supplied with any wet fittings connections but does state in the manual that push-fit connections must be used on the inlets and outlets of the valve
Size:
22mm PF inlet/outlets
Marking:
ShowerKap, ShoweKap logo and flow arrows on insulated cover
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Nexus, Nexus Omega
Product Images

Approval Holder:
Showerkap Ltd
Company Name
Showerkap Ltd
Address
Robins Green, Knob Hill, Warnham, West Sussex, RH12 3SN

View All Listings by this Company

Print This Approval


#240602075

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240602075
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.
Marking:
BOME, CR and size on body. BOME on label on cap.
Installation Requirements:
R001 R040 R120
Expiry date:
30/06/2029
Model:
T08T151C,T08T221C T08T155C & T08T225C

Approval Holder:
Bome Srl
Company Name
Bome Srl
Address
via Allo Strego 1 Cavallirio 28010 Cavallirio
Country
Italy

View All Listings by this Company
Manufacturer:
Bome Srl
Company Name
Bome Srl
Address
via Allo Strego 1 Cavallirio 28010 Cavallirio
Country
Italy

View All Listings by this Company

Print This Approval


#240602076

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. The inlet adaptors for models DT400MX15CP & DT400MX22CP are 90° elbows instead of straight adaptors and incorporate additional integral spherical valves. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240602076
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.
Marking:
IMIX DELTA, CR and size on body. IMIX DELTA on label on cap.
Installation Requirements:
R001 R040 R120
Expiry date:
30/06/2029
Model:
DT40015CP, DT40022CP DT400MX15CP & DT400MX22CP

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#241004024

Range of wall mounted concealed electronically controlled thermostatic shower mixers, incorporating plastic solenoid valves to control the flow to various outlets activated via a remote actuator. The temperature is controlled via two transducers housed within the concealed box. The products incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure: 6.0 bar. Maximum operating temperature: 65°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241004024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The products are not supplied with shower hoses, handsets, riser rails or overhead shower outlets
Size:
½” BSP (M)
Marking:
Sedal
Installation Requirements:
R001 R009 R010 R040
Expiry date:
31/10/2029
Model:
CPU iSCU2 TH 20 CPU iSCU2 TH 30 CPU iSCU2 TH 40

Approval Holder:
Sedal S.A
Company Name
Sedal S.A
Address
AV Barcelona 264 08750 Molins De Rei Barcelona
Country
Spain

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1846 of 2243

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.