Range of pre-set, spring loaded, angled pressure relief valves (set at various pressure, see models), with plastic bodies. The valves are fitted with either rotary type easing gear or hand operated lifting gear. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

2210 Valves

Section Subtitle:

Pressure relief.

WRAS Approval Number:

260304702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For non-wholesome water use only.

Size:

See models

Marking:

Caleffi logo, Caleffi Hydronic Solutions on body, pressure rating on cap.

Installation Requirements:

R001 R200

Expiry date:

31/03/2031

Model:

B312016 BSC - 3 Bar - 20.79mm manifold connection x 23.05mm spigot, B312024 BSC - 3 Bar - 20.81mm manifold connection x 23.09mm OD, B312494 CST - 3 Bar - 19.84mm manifold connection x ½” BSP (M), B312093 VIS - 3 Bar - 19.83mm manifold connection x 21.55mm spigot, B312090 CST - 3 Bar - 20.83mm manifold connection x ½” BSP (M), B312002 CST - 2.5 Bar - 20.84mm manifold connection x ½” BSP (M), B312414 CST - 3 Bar - 20.88mm manifold connection x ½” BSP (M), B312028 CST - 2.5 Bar - 23.44mm manifold connection x 18.03mm spigot, B312026 CST - 2.5 Bar - 20.83mm manifold connection x 24.93mm spigot, B312017 CST - 4 Bar - 20.82mm manifold connection x ½” BSP (M), B312027 VLL - 2.5 Bar - 20.81mm manifold connection x 24.91mm spigot, B312046 CST - 4 Bar - 20.94mm manifold connection x 25.19mm spigot.

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Range of inline magnetic or electrolytic scale inhibitors with copper or bodies, for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 8.0 bar. Electrolytic models have a maximum operating temperature of 40°C. Magnetic models are cold water use only.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm & 22mm.

Marking:

Entity and product information on adhesive label on body

Installation Requirements:

R001 R120 R170

Expiry date:

30/11/2030

Model:

Entity Magnetic (15mm – Code 403519), Entity Magnetic (22mm – Code 403526,) Entity Electrolytic (15mm – Code 403540), Entity Electrolytic (22mm – Code 403557).

Approval Holder:

UK Plumbing Supplies Ltd

Company Name

UK Plumbing Supplies Ltd

Address

Quayside 2A Wilderspool Park Greenalls Avenue Cheshire

Postcode

WA4 6HL

View All Listings by this Company

'Dicoat Medium Temp Black'. Factory applied, black coloured bitumen coating. Apply at a Relative Humidity of below 60% as per manufacturer's user instructions reference 'SPL/RD/UI/2019100121', issue no. '01' dated 08.07.2020. Cure for 7 days@30°C. For use with water up to 23°C. This material is only approved for the RH & curing conditions that appear on the approval. If the RH and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

251155070

Expiry date:

30/11/2030

Approval Holder:

Shalimar Paints Limited

Company Name

Shalimar Paints Limited

Address

Nashik Mumbai NH Road, Gonde, Nashik, Maharashtra 422403

Country

India

View All Listings by this Company

'IF1947T'. Factory applied, red coloured Fusion Bonded Epoxy coating. Apply as per manufacturer's Instructions for Use 'Doc. No. SPPR/L3/WI/PRD/28.' Cure for 45 minutes@220°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

251155071

Expiry date:

30/11/2030

Approval Holder:

Star Pipe Foundry (India) Pvt. Ltd.

Company Name

Star Pipe Foundry (India) Pvt. Ltd.

Address

Revenue Survey No. 50, Kotada Sangani, Near NH 8-B, 2 KM From Bhunava Toll Plaza, Tirth Agro Technology Hadamtala, Rajkot, Gujarat 360030

Country

India

View All Listings by this Company

'NextGen NP-F9500 PW'. Factory applied, blue coloured powder coating. Apply as per National Paints technical data sheet 'FBE/ REV01 09-07-2019'. Cure for 3 minutes@240°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250155085

Expiry date:

31/01/2030

Approval Holder:

Muscat Ductile Industry LLC

Company Name

Muscat Ductile Industry LLC

Address

PO Box: 2878 CPO PC:111, Sumail Industry Area, Al-Dakheliyeh

Country

Oman

View All Listings by this Company