Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002708

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Pentax logo, model code and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.

Product Images

Approval Holder:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Manufacturer:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Range of vertical (CVM) or horizontal (CHM) multistage pumps with stainless-steel bodies and stainless-steel impellers, intermediate chambers, shaft and outer sleeve and EPDM seals. Maximum working pressure: 25 Bar. Maximum working temperature: 23°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models below.

Marking:

Groundfos Logo, D.O.M (YYYY.MM.DD), series number, max temp, max pressure and other information on data plate on body. Flow arrow on body

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

CV(H)M 4: 2 to 12 stages: Suction flange – DN50, Discharge flange – DN20. CV(H)M 5: 2 to 12 stages: Suction flange – DN50, Discharge flange – DN40. CV(H)M 6: 2 to 11 stages: Suction flange – DN65, Discharge flange – DN40. CV(H)M 10: 2 to 10 stages: Suction flange – DN100, Discharge flange – DN80.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of ABS plastic shower handsets, (various finishes) Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240488002

Note:

Open outlet use only

Size:

½” BSP (M)

Marking:

Aqualisa on body

Installation Requirements:

R001 R040

Expiry date:

30/04/2029

Model:

707743 Shower handset chrome 707839 Shower handset black

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

A range of wall mounted shower handsets (brass bodies) incorporating approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection, and plastic flow regulators. The products are also supplied with shower hoses and handset holders. Maximum operating temperature 60.0°C Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241002057

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Volevatch on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

B/DT-00-02 (1.5m shower hose) & B/DT-00-03 (2m shower hose).

Product Images

Approval Holder:

VOLEVATCH

Company Name

VOLEVATCH

Address

1 BIS PLACE JEAN JAURES 80130 TULLY

Country

FRANCE

View All Listings by this Company

Range of shower outlets (brass bodies – various finishes) incorporating a PEX lined hose as an inner pathway with an aerator type outlet. Open outlet use only. Maximum operating temperature 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241002076

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP M

Marking:

ZHONG RUI YI SHENG on shower body

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

WJ6187000 XX Where XX denotes the finish and can be replaced with any of the following: CH = Chrome BN = Stainless Steel BBL = Brushed Black BBR = Brushed Brass, MB = Matt Black BRZ = Brushed Bronze

Product Images

Manufacturer:

Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd

Company Name

Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd

Address

Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company