Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101377

Size:

see model

Marking:

JD PRESS, JD logo, WRAS, date of manufacture MM/YY and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

JDF22015SS STRAIGHT COUPLING 15mm JDF22018SS STRAIGHT COUPLING 18mm JDF22022SS STRAIGHT COUPLING 22mm JDF22028SS STRAIGHT COUPLING 28mm JDF22035SS STRAIGHT COUPLING 35mm JDF22042SS STRAIGHT COUPLING 42mm JDF22054SS STRAIGHT COUPLING 54mm JDF22115SS SLIP COUPLING 15mm JDF22118SS SLIP COUPLING 18mm JDF22122SS SLIP COUPLING 22mm JDF22128SS SLIP COUPLING 28mm JDF22135SS SLIP COUPLING 35mm JDF22142SS SLIP COUPLING 42mm JDF22154SS SLIP COUPLING 54mm JDF9015SS 90 DEG ELBOW 15mm JDF9018SS 90 DEG ELBOW 18mm JDF9022SS 90 DEG ELBOW 22mm JDF9028SS 90 DEG ELBOW 28mm JDF9035SS 90 DEG ELBOW 35mm JDF9042SS 90 DEG ELBOW 42mm JDF9054SS 90 DEG ELBOW 54mm JDF9215SS 90 DEG M&F ELBOW 15mm JDF9218SS 90 DEG M&F ELBOW 18mm JDF9222SS 90 DEG M&F ELBOW 22mm JDF9228SS 90 DEG M&F ELBOW 28mm JDF9235SS 90 DEG M&F ELBOW 35mm JDF9242SS 90 DEG M&F ELBOW 42mm JDF9254SS 90 DEG M&F ELBOW 54mm JDF12015SS 45 DEG ELBOW 15mm JDF12018SS 45 DEG ELBOW 18mm JDF12022SS 45 DEG ELBOW 22mm JDF12028SS 45 DEG ELBOW 28mm JDF12035SS 45 DEG ELBOW 35mm JDF12042SS 45 DEG ELBOW 42mm JDF12054SS 45 DEG ELBOW 54mm JDF12115SS 45 DEG M&F ELBOW 15mm JDF12118SS 45 DEG M&F ELBOW 18mm JDF12122SS 45 DEG M&F ELBOW 22mm JDF12128SS 45 DEG M&F ELBOW 28mm JDF12135SS 45 DEG M&F ELBOW 35mm JDF12142SS 45 DEG M&F ELBOW 42mm JDF12154SS 45 DEG M&F ELBOW 54mm JDF13015SS TEE 15mm JDF13018SS TEE 18mm JDF13022SS TEE 22mm JDF13028SS TEE 28mm JDF13035SS TEE 35mm JDF13042SS TEE 42mm JDF13054SS TEE 54mm JDF13018X15SS REDUCING TEE 18mmx15mm JDF13022X15SS REDUCING TEE 22mmx15mm JDF13022X18SS REDUCING TEE 22mmx18mm JDF13028X15SS REDUCING TEE 28mmx15mm JDF13028X18SS REDUCING TEE 28mmx18mm JDF13028X22SS REDUCING TEE 28mmx22mm JDF13035X15SS REDUCING TEE 35mmx15mm JDF13035X18SS REDUCING TEE 35mmx18mm JDF13035X22SS REDUCING TEE 35mmx22mm JDF13035X28SS REDUCING TEE 35mmx28mm JDF13042X15SS REDUCING TEE 42mmx15mm JDF13042X18SS REDUCING TEE 42mmx18mm JDF13042X22SS REDUCING TEE 42mmx22mm JDF13042X28SS REDUCING TEE 42mmx28mm JDF13042X35SS REDUCING TEE 42mmx35mm JDF13054X15SS REDUCING TEE 54mmx15mm JDF13054X18SS REDUCING TEE 54mmx18mm JDF13054X22SS REDUCING TEE 54mmx22mm JDF13054X28SS REDUCING TEE 54mmx28mm JDF13054X35SS REDUCING TEE 54mmx35mm JDF13054X42SS REDUCING TEE 54mmx42mm JDF1315X1/2BSPSS FEMALE ADAPTER 15mm×Rp1/2’’ JDF1322X3/4BSPSS FEMALE ADAPTER 22mm×Rp3/4” JDF1328X1BSPSS FEMALE ADAPTER 28mm×Rp1” JDF1335X11/4BSPSS FEMALE ADAPTER 35mm×Rp1‐1/4” JDF1342X11/2BSPSS FEMALE ADAPTER 42mm×Rp1‐1/2” JDF1354X2BSPSS FEMALE ADAPTER 54mm×Rp2” JDF1215X1/2BSPSS STRAIGHT SWIVEL CONNECTOR 15mm×G1/2” JDF1218X1/2BSPSS STRAIGHT SWIVEL CONNECTOR 18mm×G1/2” JDF1222X3/4BSPSS STRAIGHT SWIVEL CONNECTOR 22mm×G3/4” JDF1228X1BSPSS STRAIGHT SWIVEL CONNECTOR 28mm×G1” JDF1235X11/4BSPSS STRAIGHT SWIVEL CONNECTOR 35mm×G1‐1/4” JDF1242X11/2BSPSS STRAIGHT SWIVEL CONNECTOR 42mm×G1‐1/2” JDF1254X2BSPSS STRAIGHT SWIVEL CONNECTOR 54mm×G2” JDF1415X1/2BSPTSS MALE ADAPTER 15mm×R1/2” JDF1418X1/2BSPTSS MALE ADAPTER 18mm×R1/2” JDF1422X3/4BSPTSS MALE ADAPTER 22mm×R3/4” JDF1428X1BSPTSS MALE ADAPTER 28mm×R1” JDF1435X11/4BSPTSS MALE ADAPTER 35mm×R1‐1/4” JDF1442X11/2BSPTSS MALE ADAPTER 42mm×R1‐1/2” JDF1454X2BSPTSS MALE ADAPTER 54mm×R2” JDF2115X1/2BSPSS Female elbow 15mm×Rp1/2” JDF2118X1/2BSPSS Female elbow 18mm×Rp1/2” JDF2122X3/4BSPSS Female elbow 22mm×Rp3/4” JDF2128X1BSPSS Female elbow 28mm×Rp1” JDF2135X11/4BSPSS Female elbow 35mm×Rp1‐1/4” JDF2142X11/2BSPSS Female elbow 42mm×Rp1‐1/2” JDF2154X2BSPSS Female elbow 54mm×Rp2” JDF2315X1/2BSPTSS Male elbow 15mm×R1/2” JDF2318X1/2BSPTSS Male elbow 18mm×R1/2” JDF2322X1/2BSPTSS Male elbow 22mm×R1/2” JDF2322X3/4BSPTSS Male elbow 22mm×R3/4” JDF2328X1BSPTSS Male elbow 28mm×R1” JDF2335X11/4BSPTSS Male elbow 35mm×R1‐1/4” JDF2342X11/2BSPTSS Male elbow 42mm×R1‐1/2” JDF2354X2BSPTSS Male elbow 54mm×R2” JDF13115X1/2BSPSS PRESS X BSP TEE 15mm×Rp1/2” JDF13118X1/2BSPSS PRESS X BSP TEE 18mm×Rp1/2” JDF13122X3/4BSPSS PRESS X BSP TEE 22mm×Rp3/4” JDF13128X1/2BSPSS PRESS X BSP TEE 28mm×Rp1/2 JDF13128X1BSPSS PRESS X BSP TEE 28mm×Rp1” JDF13135X11/4BSPSS PRESS X BSP TEE 35mm×Rp1‐1/4” JDF13142X11/2BSPSS PRESS X BSP TEE 42mm×Rp1‐1/2” JDF13154X2BSPSS PRESS X BSP TEE 54mm×Rp2” JDF2515X1/2BSPTSS PRESS X BSPT TEE 15mm×R1/2” JDF2518X1/2BSPTSS PRESS X BSPT TEE 18mm×R1/2” JDF2522X3/4BSPTSS PRESS X BSPT TEE 22mm×R3/4” JDF2528X1/2BSPTSS PRESS X BSPT TEE 28 mm×R1/2’’ JDF2528X1BSPTSS PRESS X BSPT TEE 28mm×R1” JDF2535X11/4BSPTSS PRESS X BSPT TEE 35mm×R1‐1/4” JDF2542X11/2BSPTSS PRESS X BSPT TEE 42mm×R1‐1/2” JDF2554X2BSPTSS PRESS X BSPT TEE 54mm×R2” JDF2618X15SS Reducer-A 18mm×15mm JDF2622X15SS Reducer-A 22mm×15mm JDF2622X18SS Reducer-A 22mm×18mm JDF2628X15SS Reducer-A 28mm×15mm JDF2628X18SS Reducer-A 28mm×18mm JDF2628X22SS Reducer-A 28mm×22mm JDF2635X15SS Reducer-A 35mm×15mm JDF2635X18SS Reducer-A 35mm×18mm JDF2635X22SS Reducer-A 35mm×22mm JDF2635X28SS Reducer-A 35mm×28mm JDF2642X15SS Reducer-A 42mm×15mm JDF2642X18SS Reducer-A 42mm×18mm JDF2642X22SS Reducer-A 42mm×22mm JDF2642X28SS Reducer-A 42mm×28mm JDF2642X35SS Reducer-A 42mm×35mm JDF2654X42SS Reducer-A 54mm×42mm JDF24018X15SS COUPLING REDUCER 18mmx15mm JDF24022X15SS COUPLING REDUCER 22mmx15mm JDF24022X18SS COUPLING REDUCER 22mmx18mm JDF24028X15SS COUPLING REDUCER 28mmx15mm JDF24028X18SS COUPLING REDUCER 28mmx18mm JDF24028X22SS COUPLING REDUCER 28mmx22mm JDF24035X15SS COUPLING REDUCER 35mmx15mm JDF24035X18SS COUPLING REDUCER 35mmx18mm JDF24035X22SS COUPLING REDUCER 35mmx22mm JDF24035X28SS COUPLING REDUCER 35mmx28mm JDF24042X15SS COUPLING REDUCER 42mmx15mm JDF24042X18SS COUPLING REDUCER 42mmx18mm JDF24042X22SS COUPLING REDUCER 42mmx22mm JDF24042X28SS COUPLING REDUCER 42mmx28mm JDF24042X35SS COUPLING REDUCER 42mmx35mm JDF24054X15SS COUPLING REDUCER 54mmx15mm JDF24054X18SS COUPLING REDUCER 54mmx18mm JDF24054X22SS COUPLING REDUCER 54mmx22mm JDF24054X28SS COUPLING REDUCER 54mmx28mm JDF24054X35SS COUPLING REDUCER 54mmx35mm JDF24054X42SS COUPLING REDUCER 54mmx42mm

Approval Holder:

JD Fire Ltd.

Company Name

JD Fire Ltd.

Address

Wheatfield Works, Ashton Road, Oldham

Country

OL8 3HX

View All Listings by this Company

‘Tectite 316’ range of push-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with stainless steel tube (Grade 316 manufactured to EN 10312). Maximum working pressure: Fittings 15mm to 28mm 10.0 bar. Fittings 35mm to 54mm 6.0 bar. Maximum operating temperature 90°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240702052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models.

Marking:

Tectite 316 & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

15mm TS1/TS270 Coupling 18mm TS1/TS270 Coupling 22mm TS1/TS270 Coupling 28mm TS1/TS270 Coupling 35mm TS1/TS270 Coupling 42mm TS1/TS270 Coupling 54mm TS1/TS270 Coupling 15mm TS1S/TS270S Slip Coupling 18mm TS1S/TS270S Slip Coupling 22mm TS1S/TS270S Slip Coupling 28mm TS1S/TS270S Slip Coupling 15mm x 1/2" TS2/TS270G Connector 18mm x 3/4" TS2/TS270G Connector 18mm x 1/2" TS2/TS270G Connector 22mm x 3/4" TS2/TS270G Connector 22mm x 1/2" TS2/TS270G Connector 22mm x 1" TS2/TS270G Connector 28mm x 3/4" TS2/TS270G Connector 28mm x 1" TS2/TS270G Connector 35mm x 1 1/4" TS2/TS270G Connector 42mm x 1 1/2" TS2/TS270G Connector 54mm x 2" TS2/TS270G Connector 15mm x 1/2" TS3/TS243G Connector 18mm x 3/4" TS3/TS243G Connector 18mm x 1/2" TS3/TS243G Connector 22mm x 3/4" TS3/TS243G Connector 22mm x 1/2" TS3/TS243G Connector 28mm x 3/4" TS3/TS243G Connector 28mm x 1" TS3/TS243G Connector 35mm x 1 1/4" TS3/TS243G Connector 42mm x 1 1/2" TS3/TS243G Connector 54mm x 2" TS3/TS243G Connector 18 x 15mm TS6/TS243 Reducer 22 x 15mm TS6/TS243 Reducer 22 x 18mm TS6/TS243 Reducer 28 x 15mm TS6/TS243 Reducer 28 x 18mm TS6/TS243 Reducer 28 x 22mm TS6/TS243 Reducer 35 x 22mm TS6/TS243 Reducer 35 x 28mm TS6/TS243 Reducer 42 x 22mm TS6/TS243 Reducer 42 x 28mm TS6/TS243 Reducer 42 x 35mm TS6/TS243 Reducer 54 x 35mm TS6/TS243 Reducer 54 x 42mm TS6/TS243 Reducer 15mm TS12/TS090 Elbow 18mm TS12/TS090 Elbow 22mm TS12/TS090 Elbow 28mm TS12/TS090 Elbow 35mm TS12/TS090 Elbow 42mm TS12/TS090 Elbow 54mm TS12/TS090 Elbow 15mm TS12S/TS092 Street Elbow 18mm TS12S/TS092 Street Elbow 22mm TS12S/TS092 Street Elbow 28mm TS12S/TS092 Street Elbow 15mm x 1/2" TS13/TS092G Elbow 18mm x 1/2" TS13/TS092G Elbow 22mm x 3/4" TS13/TS092G Elbw , 28mm x 1" TS13/TS092G Elbow 15mm x 1/2" TS14/TS090G Elbow 18mm x 1/2" TS14/TS090G Elbow 18mm x 3/4" TS14/TS090G Elbow 22mm x 3/4" TS14/TS090G Elbow 28mm x 1" TS14/TS090G Elbow 15mm x 1/2" TS15/TS471G Backplate Elbow 18mm x 1/2" TS15/TS471G Backplate Elbow 22mm x 3/4" TS15/TS471G Backplate Elbow 15mm TS18/TS002A Slow Bend 18mm TS18/TS002A Slow Bend 22mm TS18/TS002A Slow Bend 28mm TS18/TS002A Slow Bend 35mm TS18/TS002A Slow Bend 42mm TS18/TS002A Slow Bend 54mm TS18/TS002A Slow Bend 15mm TS18S/TS001 Elbow 18mm TS18S/TS001 Elbow 22mm TS18S/TS001 Elbow 28mm TS18S/TS001 Elbow 15mm TS21/TS041 Obtuse Elbow 18mm TS21/TS041 Obtuse Elbow 22mm TS21/TS041 Obtuse Elbow 28mm TS21/TS041 Obtuse Elbow 35mm TS21/TS041 Obtuse Elbow 42mm TS21/TS041 Obtuse Elbow 54mm TS21/TS041 Obtuse Elbow 15mm TS21S/TS040 Obtuse Street Elbow 18mm TS21S/TS040 Obtuse Street Elbow 22mm TS21S/TS040 Obtuse Street Elbow 28mm TS21S/TS040 Obtuse Street Elbow 35mm TS21S/TS040 Obtuse Street Elbow 42mm TS21S/TS040 Obtuse Street Elbow 15mm TS24/TS130 Tee 18mm TS24/TS130 Tee 22mm TS24/TS130 Tee 28mm TS24/TS130 Tee 35mm TS24/TS130 Tee 42mm TS24/TS130 Tee 54mm TS24/TS130 Tee 18 x 18 x 15mm TS25/TS130 Tee 22 x 22 x 15mm TS25/TS130 Tee 22 x 22 x 18mm TS25/TS130 Tee 28 x 28 x 15mm TS25/TS130 Tee 28 x 28 x 18mm TS25/TS130 Tee 28 x 28 x 22mm TS25/TS130 Tee 35 x 35 x 15mm TS25/TS130 Tee 35 x 35 x 22mm TS25/TS130 Tee 35 x 35 x 28mm TS25/TS130 Tee 42 x 42 x 28mm TS25/TS130 Tee 54 x 54 x 22mm TS25/TS130 Tee 54 x 54 x 28mm TS25/TS130 Tee 15 x 15mm x 1/2" TS30/TS130G Tee 18 x 18mm x 1/2" TS30/TS130G Tee 22 x 22mm x 1/2" TS30/TS130G Tee 22 x 22mm x 3/4" TS30/TS130G Tee 28 x 28mm x 1/2" TS30/TS130G Tee 35 x 35mm x 1/2" TS30/TS130G Tee 42 x 42mm x 1/2" TS30/TS130G Tee 15mm TS61/TS301 Stop End 18mm TS61/TS301 Stop End 22mm TS61/TS301 Stop End 28mm TS61/TS301 Stop End 35mm TS61/TS301 Stop End 42mm TS61/TS301 Stop End 54mm TS61/TS301 Stop End 15mm x 1/2" TS62/TS062 Tap Connector 22mm x 3/4" TS62/TS062 Tap Connector

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Manufacturer:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of ‘B’ Press XL copper crimped fittings with EPDM ‘O’-rings for use with copper pipe to BS EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240902042

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models Below

Marking:

>‘B’<, Size and DVGW

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

P5001 90° Street Bend P5001 06400000 – 64MM P5001 06700000 – 67MM P5001 07600000 – 76MM P5001 08900000 – 89MM P5001 10800000 – 108MM P5002 90° Bend P5002 06400000 – 64MM P5002 06700000 – 67MM P5002 07600000 – 76MM P5002 08900000 – 89MM P5002 10800000 – 108MM P5040 45° Obtuse Street Elbow P5040 06400000 – 64MM P5040 06700000 – 67MM P5040 07600000 – 76MM P5040 08900000 – 89MM P5040 10800000 – 108MM P5041 45° Obtuse Elbow P5041 06400000 – 64MM P5041 06700000 – 67MM P5041 07600000 – 76MM P5041 08900000 – 89MM P5041 10800000 – 108MM P5130 Equal Tee P5130 06400000 – 64MM P5130 06700000 – 67MM P5130 07600000 – 76MM P5130 08900000 – 89MM P5R 108108108 – 108MM P5130G Tee with Female Branch P5130G06406640 – 64 x ¾” BSP x 64MM P5130G06408640 – 64 x 1” BSP X 64MM P5130G06416640 – 64 x 2” BSP X 64MM P5130G06706670 – 67 x ¾” BSP x 67MM P5130G06716670 – 67 x 2” BSP x 67MM P5130G07606760 – 76 x ¾” BSP x 76MM P5130G07616760 – 76 x 2” BSP x 76MM P5130G08906890 – 89 x ¾” BSP x 89MM P5130G08916890 – 89 x 2” BSP x 89MM P5RG108061080 – 108 x ¾” BSP x 108MM P5RG108161080 – 108 x 2” BSP x 108MM P5130RB Tee Reduced Branch P5130 06435640 – 64 x 35 x 64MM P5130 06442650 – 64 x 42 x 64MM P5130 06454640 – 64 x 54 x 64MM P5130 06728670 – 67 x 28 x 67MM P5130 06735670 – 67 x 35 x 67MM P5130 06742670 – 67 x 42 x 67MM P5130 06754670 – 67 x 54 x 67MM P5130 07628760 – 76 x 28 x 76MM P5130 07635760 – 76 x 35 x 76MM P5130 07642760 – 76 x 42 x 76MM P5130 07654760 – 76 x 54 x 76MM P5130 07664760 – 76 x 64 x 76MM P5130 07667760 – 76 x 67 x 76MM P5130 08954890 – 89 x 54 x 89MM P5130 08964890 – 89 x 64 x 89MM P5130 08976890 – 89 x 76 x 89MM P5R 0108054108 – 108 x 54 x 108MM P5R 0108064108 – 108 x 64 x 108MM P5R 0108076108 – 108 x 76 x 108MM P5R 0108089108 – 108 x 89 x 108MM P5230B Flange 45° P5230B06400000 – 64MM P5230B06700000 – 67MM P5230B07600000 – 76MM P5230 076000UK – 76MM P5230B08900000 – 89MM P5230B10800000 – 108MM P5243 Fitting Reducer P5243 06435000 – 64 x 35MM P5243 06442000 – 64 x 42MM P5243 06454000 – 64 X 54MM P5243 06728000 – 67 x 28MM P5243 06735000 – 67 x 35MM P5243 06742000 – 67 x 42MM P5243 06754000 – 67 x 54MM P5243 07628000 – 76 x 28MM P5243 07635000 – 76 x 35MM P5243 07642000 – 76 x 42MM P5243 07654000 – 76 x 54MM P5243 07664000 – 76 x 64MM P5243 07667000 – 76 x 67MM P5243 08954000 – 89 x 54MM P5243 08964000 – 89 x 64MM P5243 08976000 – 89 x 76MM P5243 10854000 – 108 x 54MM P5243 10864000 – 108 x 64MM P5243 10876000 – 108 x 76MM P5243 10889000 – 108 x 89MM P5243G Male Threaded Straight Connector P5243G064200000 – 64 x 2-1/2” BSP P5243G067200000 – 67 x 2-1/2” BSP P5243G076200000 – 76 x 2-1/2” BSP P5243G076024000 – 76 x 3” BSP P5243G089240000 – 89 x 3” BSP P5243G10832000 – 108 X 4” BSP P5270 Straight Connector P5270 06400000 – 64MM P5270 06700000 – 67MM P5270 07600000 – 76MM P5270 08900000 – 89MM P5270 10800000 – 108MM P5270G Female Threaded Straight Connector P5270G06420000 – 64 x 2-1/2” BSP P5270G06720000 – 67 x 2-1/2” BSP P5270G07620000 – 76 x 2-1/2” BSP P5270G07624000 – 76 x 3” BSP P5270G08924000 – 89 x 3” BSP P5270G10832000 – 108 x 4” BSP P5275 Repair Coupling P5275 06400000 – 64MM P5275 06700000 – 67MM P5275 07600000 – 76MM P5275 08900000 – 89MM P5275 10800000 – 108MM P5301 End Cap P5301 06400000 – 64MM P5301 06700000 – 67MM P5301 07600000 – 76MM P5301 08900000 – 89MM P5301 10800000 – 108MM

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of copper crimped fittings with EPDM ‘O’-rings for use with copper pipe manufactured to EN1057. For above and below ground use. Maximum working pressure 16 Bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240902057

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models below

Marking:

Zhuji City logo and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

100ENM - Copper Press Straight Coupling PxP: 100ENM12AB - 12mm 100ENM15AB - 15mm 100ENM18AB - 18mm 100ENM22AB - 22mm 100ENM28AB - 28mm 100ENM35AB - 35mm 100ENM42AB - 42mm 100ENM54AB - 54mm 100ENM67AB - 66.7mm 100ENM76AB - 76.1mm 100ENM89AB - 88.9mm 100ENM108AB - 108mm 101ENM - Copper Press Reducing Coupling PxP: 101ENM1512AB - 15mm×12mm 101ENM1514AB - 15mm×14mm 101ENM1615AB - 16mm×15mm 101ENM1812AB - 18mm×12mm 101ENM1815AB - 18mm×15mm 101ENM1817AB - 18mm×17mm 101ENM2215AB - 22mm×15mm 101ENM2218AB - 22mm×18mm 101ENM2815AB - 28mm×15mm 101ENM2818AB - 28mm×18mm 101ENM2822AB - 28mm×22mm 101ENM3522AB - 35mm×22mm 101ENM3528AB - 35mm×28mm 101ENM4222AB - 42mm×22mm 101ENM4228AB - 42mm×28mm 101ENM4235AB - 42mm×35mm 101ENM5428AB - 54mm×28mm 101ENM5435AB - 54mm×35mm 101ENM5442AB - 54mm×42mm 101ENM3515AB - 35mmx15mm 101ENM6754AB - 66.7mmx54mm 101ENM7628AB - 76.1x28mm 101ENM6728AB - 66.7x28mm 101ENM6735AB - 66.7x35mm 101ENM6742AB - 66.7x42mm 102ENM - Copper Press Fitting Reducer FTGxP: 102ENM1512AB - 15mm×12mm 102ENM1812AB - 18mm×12 mm 102ENM1815AB - 18mm×15mm 102ENM2215AB - 22mm×15mm 102ENM2218AB - 22mm×18mm 102ENM2815AB - 28mm×15mm 102ENM2818AB - 28mm×18mm 102ENM2822AB - 28mm×22mm 102ENM3522AB - 35mm×22 mm 102ENM3528AB - 35mm×28 mm 102ENM4222AB - 42mm×22mm 102ENM4228AB - 42mm×28mm 102ENM4235AB - 42mm×35mm 102ENM5422AB - 54mmx22mm 102ENM5428AB - 54mm×28mm 102ENM5435AB - 54mm×35mm 102ENM5442AB - 54mm×42mm 102ENM6728AB - 66.7mm×28mm 102ENM6735AB - 66.7mm×35mm 102ENM6742AB - 66.7mm×42mm 102ENM6754AB - 66.7mm×54mm 102ENM7635AB - 76.1mm×35mm 102ENM7642AB - 76.1mm×42mm 102ENM7654AB - 76.1mm×54mm 102ENM7667AB - 76.1mm×66.7mm 102ENM8954AB - 88.9mm×54mm 102ENM8976AB - 88.9mm×76.1mm 102ENM10842AB - 108mm×42mm 102ENM10854AB - 108mm×54mm 102ENM10867AB - 108mm×66.7mm 102ENM10876AB - 108mm×76.1mm 102ENM10889AB - 108mm×88.9mm 103ENM - Copper Press Elbow - 90°PxP: 103ENM12AB - 12mm 103ENM15AB - 15mm 103ENM18AB - 18mm 103ENM22AB - 22mm 103ENM28AB - 28mm 103ENM35AB - 35mm 103ENM42AB - 42mm 103ENM54AB - 54mm 103ENM67AB - 66.7mm 103ENM76AB - 76.1mm 103ENM89AB - 88.9mm 103ENM108AB - 108mm 104ENM - Copper Press Elbow - 90°(Male / Female) FTGxP: 104ENM12AB - 12mm 104ENM15AB - 15mm 104ENM18AB - 18mm 104ENM22AB - 22mm 104ENM28AB - 28mm 104ENM35AB - 35mm 104ENM42AB - 42mm 104ENM54AB - 54mm 104ENM67AB - 66.7mm 104ENM76AB - 76.1mm 104ENM89AB - 88.9mm 104ENM108AB - 108mm 107ENM - Copper Press Elbow - 45°PxP: 107ENM12AB - 12mm 107ENM15AB - 15mm 107ENM18AB - 18mm 107ENM22AB - 22mm 107ENM28AB - 28mm 107ENM35AB - 35mm 107ENM42AB - 42mm 107ENM54AB - 54mm 107ENM67AB - 66.7mm 107ENM76AB - 76.1mm 107ENM89AB - 88.9mm 107ENM108AB - 108mm 108ENM - Copper Press Elbow - 45°(Male / Female) FTGxP: 108ENM12AB - 12mm 108ENM15AB - 15mm 108ENM18AB - 18mm 108ENM22AB - 22mm 108ENM28AB - 28mm 108ENM35AB - 35mm 108ENM42AB - 42mm 108ENM54AB - 54mm 108ENM67AB - 66.7mm 108ENM76AB - 76.1mm 108ENM89AB - 88.9mm 108ENM108AB - 108mm 111ENM - Copper Press Slip Extended Coupling PxP: 111ENM12AL - 12mm 111ENM15AL - 15mm 111ENM18AL - 18mm 111ENM22AL - 22mm 111ENM28AL - 28mm 111ENM35AL - 35mm 111ENM42AL - 42mm 111ENM54AL - 54mm 111ENM67AL - 66.7mm 111ENM76AL - 76.1mm 111ENM89AL - 88.9mm 111ENM108AL - 108mm 112ENM - Copper Press Equal Tee PxPxP: 112ENM12AB - 12mm 112ENM15AB - 15mm 112ENM18AB - 18mm 112ENM22AB - 22mm 112ENM28AB - 28mm 112ENM35AB - 35mm 112ENM42AB - 42mm 112ENM54AB - 54mm 112ENM67AB - 66.7mm 112ENM76AB - 76.1mm 112ENM89AB - 88.9mm 112ENM108AB - 108mm 113ENM - Copper Press Unequal Tee PxPxP: 113ENM151512AB - 15mm×15mm×12mm 113ENM181812AB - 18mm×18mm×12mm 113ENM181815AB - 18mm×18mm×15mm 113ENM222212AB - 22mm×22mm×12mm 113ENM222215AB - 22mm×22mm×15mm 113ENM222218AB - 22mm×22mm×18mm 113ENM282815AB - 28mm×28mm×15mm 113ENM282818AB - 28mm×28mm×18mm 113ENM282822AB - 28mm×28mm×22mm 113ENM353515AB - 35mm×35mm×15mm 113ENM353522AB - 35mm×35mm×22mm 113ENM353528AB - 35mm×35mm×28mm 113ENM424215AB - 42mm×42mm×15mm 113ENM424222AB - 42mm×42mm×22mm 113ENM424228AB - 42mm×42mm×28mm 113ENM424235AB - 42mm×42mm×35mm 113ENM545415AB - 54mm×54mm×15mm 113ENM545422AB - 54mm×54mm×22mm 113ENM545428AB - 54mm×54mm×28mm 113ENM545435AB - 54mm×54mm×35mm 113ENM545442AB - 54mm×54mm×42mm 113ENM676728AB - 66.7mm×66.7mm×28mm 113ENM676735AB - 66.7mm×66.7mm×35mm 113ENM676742AB - 66.7mm×66.7mm×42mm 113ENM676754AB - 66.7mm×66.7mm×54mm 113ENM767622AB - 76.1mm×76.1mm×22mm 113ENM767628AB - 76.1mm×76.1mm×28mm 113ENM767635AB - 76.1mm×76.1mm×35mm 113ENM767642AB - 76.1mm×76.1mm×42mm 113ENM767654AB - 76.1mm×76.1mm×54mm 113ENM767667AB - 76.1mm×76.1mm×66.7mm 113ENM898954AB - 88.9mm×88.9mm×54mm 113ENM898976AB - 88.9mm×88.9mm×76.1mm 113ENM10810854AB - 108mm×108mm×54mm 113ENM10810867AB - 108mm×108mm×66.7mm 113ENM10810876AB - 108mm×108mm×76.1mm 113ENM10810889AB - 108mm×108mm×89mm 114ENM151212AB - 15mm×12mm×12mm 114ENM151215AB - 15mm×12mm×15mm 114ENM181515AB - 18mm×15mm×15mm 114ENM181518AB - 18mm×15mm×18mm 114ENM221515AB - 22mm×15mm×15mm 114ENM221518AB - 22mm×15mm×18mm 114ENM221522AB - 22mm×15mm×22mm 114ENM221818AB - 22mm×18mm×18mm 114ENM221822AB - 22mm×18mm×22mm 114ENM281528AB - 28mm×15mm×28mm 114ENM282215AB - 28mm×22mm×15mm 114ENM282222AB - 28mm×22mm×22mm 114ENM282228AB - 28mm×22mm×28mm 114ENM352822AB - 35mm×28mm×22mm 114ENM352828AB - 35mm×28mm×28mm 114ENM423542AB - 42mm×35mm×42mm 114ENM542854AB - 54mm×28mm×54mm 114ENM221815AB - 22mmx18mmx15mm 115ENM - Copper Press Unequal Tee PxPxP: 115ENM151522AB - 15mm×15mm×22mm 115ENM121215AB - 12mmx12mmx15mm 115ENM222228AB - 22mmx22mmx28mm 121ENM - Copper Press Reducing Elbow - 90°PxP: 121ENM2215AB - 22mm×15mm 121ENM2815AB - 28x15mm 121ENM2822AB - 28x22mm 137ENM - Copper Press End Cap P: 137ENM12AB - 12mm 137ENM15AB - 15mm 137ENM18AB - 18mm 137ENM22AB - 22mm 137ENM28AB - 28mm 137ENM35AB - 35mm 137ENM42AB - 42mm 137ENM54AB - 54mm 137ENM67AB - 66.7mm 137ENM76AB - 76.1mm 137ENM89AB - 88.9mm 137ENM108AB - 108mm 138ENM - Copper Press Full crossover P x P: 138ENM15AB - 15mm 138ENM18AB - 18mm 138ENM22AB - 22mm 148ENM - Copper Press Partial crossover FTGxP: 148ENM12AB - 12mm 148ENM15AB - 15mm 148ENM18AB - 18mm 148ENM22AB - 22mm 149ENM - Copper Press Street crossover FTGxFTG: 149ENM15AB - 15mm 149ENM18AB - 18mm 149ENM22AB - 22mm 149ENM28AB - 28mm 301ENM - Copper Press Adapter - male thread P x R: 301ENM1210AB - 12mm×3/8” BSP 301ENM1213AB - 12mm×1/2” BSP 301ENM1510AB - 15mm×3/8” BSP 301ENM1513AB - 15mm×1/2” BSP 301ENM1519AB - 15mm×3/4” BSP 301ENM1813AB - 18mm×1/2” BSP 301ENM1819AB - 18mm×3/4” BSP 301ENM2213AB - 22mm×1/2” BSP 301ENM2219AB - 22mm×3/4” BSP 301ENM2225AB - 22mm×1” BSP 301ENM2819AB - 28mm×3/4” BSP 301ENM2825AB - 28mm×1” BSP 301ENM2832AB - 28mm×1-1/4” BSP 301ENM3525AB - 35mm×1” BSP 301ENM3532AB - 35mm×1-1/4” BSP 301ENM4232AB - 42mm×1-1/4” BSP 301ENM4238AB - 42mm×1-1/2” BSP 301ENM5451AB - 54mm×2” BSP 301ENM6764AB - 66.7mm×2-1/2” BSP 301ENM7664AB - 76.1mm×2-1/2” BSP 301ENM7676AB - 76.1mm×3” BSP 301ENM8976AB - 88.9mm×3” BSP 301ENM108102AB - 108mm×4” BSP 301ENM3538AB - 35mmx1-1/2" BSP 301ENM5438AB - 54mmx1-1/2" BSP 302ENM - Copper Press Adapter - Female thread P x Rp: 302ENM1210AB - 12mm×3/8” BSP 302ENM1213AB - 12mm×1/2” BSP 302ENM1510AB - 15mm×3/8” BSP 302ENM1513AB - 15mm×1/2” BSP 302ENM1519AB - 15mm×3/4” BSP 302ENM1819AB - 18mm×3/4” BSP 302ENM2213AB - 22mm×1/2” BSP 302ENM2219AB - 22mm×3/4” BSP 302ENM2225AB - 22mm×1” BSP 302ENM2819AB - 28mm×3/4” BSP 302ENM2825AB - 28mm×1” BSP 302ENM3532AB - 35mm×1-1/4” BSP 302ENM4238AB - 42mm×1-1/2” BSP 302ENM5451AB - 54mm×2” BSP 302ENM6764AB - 66.7mm×2-1/2” BSP 302ENM7664AB - 76.1mm×2-1/2” BSP 302ENM7676AB - 76.1mm×3” BSP 302ENM8976AB - 88.9mm×3” BSP 302ENM108102AB - 108mm×4” BSP 302ENM1813AB - 18mmx1/2" BSP 302ENM2832AB - 28mmx1-1/4" BSP 302ENM3525AB - 35mmx1" BSP 303ENM - Copper Press Adapter - male thread FTG x R: 303ENM1513AB - 15mm×1/2” BSP 303ENM2213AB - 22mm×1/2” BSP 303ENM2219AB - 22mm×3/4” BSP 303ENM1213AB - 12mmx1/2" BSP 303ENM1510AB - 15mmx3/8" BSP 303ENM2825AB - 28mmx1" BSP 303ENM3532AB - 35mmx1-1/4" BSP 304ENM - Copper Press Adapter - Female thread FTG x Rp: 304ENM1513AB - 15mm×1/2” BSP 304ENM2213AB - 22mm×1/2” BSP 304ENM2219AB - 22mm×3/4” BSP 304ENM3525AB - 35mm×1” BSP 304ENM5451AB - 54mm×2” BSP 304ENM1813AB -18mmx1/2" BSP 304ENM2825AB -28mmx1" BSP 305ENM - Copper Press Adapter Union P x P 305ENM1515AB - 15mm 305ENM2222AB - 22mm 305ENM2828AB - 28mm 305ENM3535AB - 35mm 305ENM4242AB - 42mm 305ENM5454AB - 54mm 306ENM - Copper Press Adapter Union - male thread P x R 306ENM1513AB - 15mmx1/2" 306ENM2219AB - 22mmx3/4" 306ENM2825AB - 28mmx1" 306ENM3532AB - 35mmx1-1/4" 306ENM4238AB - 42mmx1-1/2" 306ENM5451AB - 54mmx2" 307ENM - Copper Press Adapter Union - female thread P x Rp 307ENM1513AB - 15mmx1/2" 307ENM2219AB - 22mmx3/4" 307ENM2825AB - 28mmx1" 307ENM3532AB - 35mmx1-1/4" 307ENM4238AB - 42mmx1-1/2" 307ENM5451AB - 54mmx2" 313ENM - Copper Press Adapter Tee - female thread on branch P x P x Rp: 313ENM121213AB - 12mm×12mm×1/2” BSP 313ENM151513AB - 15mm×15mm×1/2” BSP 313ENM181813AB - 18mm×18mm×1/2” BSP 313ENM222213AB - 22mm×22mm×1/2” BSP 313ENM222219AB - 22mm×22mm×3/4” BSP 313ENM282813AB - 28mm×28mm×1/2” BSP 313ENM282819AB - 28mm×28mm×3/4” BSP 313ENM353513AB - 35mm×35mm×1/2” BSP 313ENM424213AB - 42mm×42mm×1/2” BSP 313ENM545413AB - 54mm×54mm×1/2” BSP 313ENM282825AB - 28mmx28mmx1" BSP 313ENM353519AB - 35mmx35mmx3/4" BSP 313ENM353525AB - 35mmx35mmx1" BSP 313ENM353532AB - 35mmx35mmx1-1/4" BSP 313ENM424219AB - 42mmx42mmx3/4" BSP 313ENM424238AB - 42mmx42mmx1-1/2" BSP 313ENM545425AB - 54mmx54mmx1" BSP 313ENM424225AB - 42mmx42mmx1" 313ENM545451AB - 54mmx54mmx2" 314ENM - Copper Press Adapter 90° Elbow - male thread P x R: 314ENM1513AB - 15mm×1/2” BSP 314ENM1813AB - 18mm×1/2” BSP 314ENM2219AB - 22mm×3/4” BSP 314ENM2825AB - 28mm×1” BSP 314ENM1210AB - 12mmx3/8" BSP 314ENM1510AB - 15mmx3/8" BSP 314ENM1819AB - 18mmx3/4" BSP 314ENM3532AB - 35mmx1-1/4" BSP 315ENM - Copper Press Adapter 90° Elbow - female thread P x Rp: 315ENM1513AB - 15mm×1/2” BSP 315ENM1813AB - 18mm×1/2” BSP 315ENM2219AB - 22mm×3/4” BSP 315ENM2825AB - 28mm×1” BSP 315ENM1210AB - 12mmx3/8" BSP 315ENM1213AB - 12mmx1/2" BSP 315ENM1510AB - 15mmx3/8" BSP 315ENM2213AB - 22mmx1/2" BSP 326ENM - Copper Press Female Backplate Elbow P x Rp 326ENM1513AB - 15mmx1/2" 326ENM2219AB - 22mmx3/4" Copper Press UnequalTee PxFTGxP: 142ENM545422AB - 54x54x22mm 142ENM545428AB - 54x54x28mm Copper Press Slip Coupling PxP: 111ENM15AB - 15mm 111ENM18AB - 18mm 111ENM22AB - 22mm 111ENM28AB - 28mm 111ENM35AB - 35mm 111ENM42AB - 42mm 111ENM54AB - 54mm

Product Images

Approval Holder:

Zhuji City Howhi Air Conditioners Made Co Ltd

Company Name

Zhuji City Howhi Air Conditioners Made Co Ltd

Address

Donggong Village, Yangmeiqiao Community, Diankou Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province, China

View All Listings by this Company

Range of blue epoxy coated ductile iron dismantling fittings with EPDM sealing rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

240602033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 to DN1200 Flanged

Marking:

FAMAT, Sapag-valves.com, model and technical information on data plate on body

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

DJ1 Dismantling Joint

Product Images

Approval Holder:

SAPAG VALVES

Company Name

SAPAG VALVES

Address

2 rue du Marais HAM

Postcode

80400

Country

France

Phone

+33 (0)3 23 81 42 87

General Email

eric.vincent@sapag-valves.com

View All Listings by this Company

‘POD’ range of indirect and direct heat interface units providing space heating and instantaneous hot water. The heat transfer is generated via plate heat exchangers. The domestic hot water (DHW) circuit incorporates an adjustable temperature mixing valve. The indirect models incorporate an expansion vessel (on the CW inlet of the DHW circuit) and a pressure relief valve set at 3.0 bar (on the space heating circuit). The indirect models only are supplied with a temporary filling loop, which comprises of a stainless steel braided EPDM lined flexible hose assembly and a lever operated spherical valve for connection to the primary circuit. The angled cold water inlet incorporates an isolation valve and a branch to connect to the filling loop, which includes a double check valve assembly (verified by test, suitable for backflow protection against Fluid Category 3). Maximum working pressure for indirect units: Primary circuit: 16.0 bar. Space heating: 2.5 bar. Secondary circuit (DHW): 10.0 bar. Maximum working pressure for direct units: Primary circuit: 10.0 bar. Space heating: 10.0 bar. Secondary circuit (DHW): 10.0 bar. Maximum operating temperature for domestic hot water 65°C. Maximum operating temperature for central heating and primary circuit 85°C.

Section:

1350 Heat Exchangers

Size:

22mm copper pipe connection.

Marking:

Ideal Heating badge and model on adhesive label on front casing. Manufacturer, serial number, model number, pressure rating and other technical information on data label within appliance.

Installation Requirements:

R001 R140 R360

Expiry date:

30/04/2027

Model:

POD i305LOR POD i405LOR POD i505LOR POD i605LOR POD i705LOR

Approval Holder:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Manufacturer:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Range of water meters with cast iron bodies (blue epoxy coating) and EPDM ‘O’ rings. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 (200mm) & DN150 (500mm)

Marking:

SENSUS on cover. Cordonel, DN, Max pressure and other technical information on meter face. Size on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

GN Q3 40 – Cordonel DN50 (200mm) GN Q3 400 – Cordonel DN150 (500mm)

Approval Holder:

Sensus UK Systems Ltd

Company Name

Sensus UK Systems Ltd

Address

North Wing Central 40, Crockford Lane, Basingstoke, RG24 8GU

Country

Basingstoke

View All Listings by this Company

Manufacturer:

Sensus GmbH Hannover

Company Name

Sensus GmbH Hannover

Address

Meineckestrasse 10 Laatzen 30880 Germany

View All Listings by this Company

Range of water meters with either cast iron (blue epoxy coated) or stainless-steel bodies, transducers and EPDM rubber O-rings. Maximum working pressure 25.0 Bar. Maximum operating temperature 50.0°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Flanged - DN40 to DN100.

Marking:

Weihai Ploumeter Co., Ltd. Model number and product information on data plate.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

SC7

Product Images

Approval Holder:

Weihai Ploumeter Co., Ltd.

Company Name

Weihai Ploumeter Co., Ltd.

Address

No. 576 South of Torch Road, Huancui District, Weihai, Shandong Province

Country

China

View All Listings by this Company

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Rubinetteria logo, Made in Italy, temperature and pressure cast on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

145.12 - Stopshock 145.

Product Images

Approval Holder:

Rubinetteria Malgorani Pietro Srl

Company Name

Rubinetteria Malgorani Pietro Srl

Address

Via per Invorio 24 28010 Colazza Italy

Phone

0039 322 218129

General Email

fabio@malgorani.it

View All Listings by this Company

Manufacturer:

Rubinetteria Malgorani Pietro Srl

Company Name

Rubinetteria Malgorani Pietro Srl

Address

Via per Invorio 24 28010 Colazza Italy

Phone

0039 322 218129

General Email

fabio@malgorani.it

View All Listings by this Company

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

CIM & Made in Italy on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

CIM 1450 – Water Hammer shock absorber

Approval Holder:

Cimberio S.p.A

Company Name

Cimberio S.p.A

Address

Via Torchio, 57 San Maurizio d’Opaglio

Postcode

28017

Country

Italy

Phone

+39.0322.923001

General Email

tguidetti@cimberio.it

View All Listings by this Company