Range of ultraviolet disinfection units with stainless-steel bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:

2411 Disinfection Equipment

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) to 3” BSP (M). DN100 to DN300 flanged.

Marking:

VAN REMMEN, model and other technical information on label on body

Installation Requirements:

R001 R150 R170

Expiry date:

30/09/2029

Model:

V90, V100, V110, V120, V130, V140, V150, V160, V170, V180 & V190 - ½” BSP (M) to 3” BSP (M). V200, V220, V250 & V290 - DN100 to DN300 flanged.

Product Images

Approval Holder:

Van Remmen UV Techniek B.V.

Company Name

Van Remmen UV Techniek B.V.

Address

Hooglandweg 3, 8131 TE, Wijhe

Country

The Netherlands

View All Listings by this Company

Manufacturer:

Wycombe Water Ltd.

Company Name

Wycombe Water Ltd.

Address

6 Premus Coldharbour Way, Aylesbury HP19 8AP Aylesbury Bucks

Postcode

HP19 8AP

Country

United Kingdom

Phone

01480355446

View All Listings by this Company

‘Ultraform® S2320 Aqua AT UNCOLORED’ & 'Ultraform® S2320 003 AT UNCOLORED'. Uncoloured (appears white), injection moulded C-POM material. For use with water up to 65°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240855037

Expiry date:

31/08/2029

Approval Holder:

BASF SE

Company Name

BASF SE

Address

Carl-Bosch-Str. 38, 67056 Ludwigshafen

Country

Germany

View All Listings by this Company

'Ronfalin ABS 609 White 2097P'. White coloured (opaque), injection moulded ABS materials. For use with water up to 85°C.

Section:

5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)

Expiry date:

31/08/2029

Approval Holder:

Lyondellbasell

Company Name

Lyondellbasell

Address

1 Kingsland Grange Woolston, Warrington, Cheshire

Postcode

WA1 4RA

View All Listings by this Company

'Series 2000 RAL 5015'. Factory applied, blue coloured epoxy resin coating. Apply as per manufacturer’s data application sheet ‘Revision: 6 (2018/10/01)’ created ‘2015/11/11’. Cure for 10 minutes@180°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240855028

Expiry date:

31/08/2029

Approval Holder:

Klinger (Pty) Ltd.

Company Name

Klinger (Pty) Ltd.

View All Listings by this Company

'CLEAN TECH PW (BG)'. Factory applied, two-component, blue coloured epoxy coating. Mix parts A and B in a volume ratio of 3:1 and apply as per manufacturer's TDS 'CCPL/TDS/R11/CRC/22-23/04/R13/BG/R1', dated '15.09.2022'. Cure for 7 days@30°C. Between August 2024 and January 2025, the coating is approved for use with water up to 23°C. Between February 2025 and August 2029, the coating is approved for use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240855030

Expiry date:

31/08/2029

Approval Holder:

Clean Coats Pvt. Ltd.

Company Name

Clean Coats Pvt. Ltd.

Address

K 30/1, Additional Industrial Area, M.I.D.C. Anand Nagar, Ambernath (E), Dist. Thane, Maharashtra, PIN 412506

Country

India

View All Listings by this Company