Directory Search Results

Fittings Materials
Print List

#240904028

Range of R-154 stainless steel pressed collars incorporating stainless steel bodies (304L or 316L) and are only to be used with stainless steel pipe. Maximum working pressure for sizes up to DN150 (FCM models) or DN125 (FCI models) is 25.0 bar. Maximum working pressure for size DN200 (FCM models) or DN150 and DN200 (FCI models) is 16.0 bar. Maximum operating temperature 99°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
240904028
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN 40 to DN 200.
Marking:
Nords, batch ID, size and material grade inkjet on collar.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
FCM0604420DHS. FCM0404420DHS. FCM0605420DHS. FCM0405420DHS. FCM0606920DHS. FCM0406920DHS. FCM0608420DHS. FCM0408420DHS. FCM0610630SPE. FCM0410630SPE. FCM0613130DHS. FCM0413130DHS. FCM0615630SPE. FCM0415630SPE. FCI0604820DHS. FCI0404820DHS. FCI0606020DHS. FCI0406020DHS. FCI0607620DHS. FCI0407620DHS. FCI0608820DHS. FCI0408820DHS. FCI0611430SPE. FCI0411430SPE. FCI0613930DHS. FCI0413930DHS. FCM0620630DHS. FCM0420630DHS. FCI0616826DHS. FCI0416826DHS. FCI0621930DHS. FCI0421930DHS.
Product Images
Approval Holder:
Nords International AB
Company Name
Nords International AB
Address
Prostårdsvägen 2 Molkom
Postcode
SE-65560
Country
Sweden
General Email
ralph.abraham@nordsinternational.com

View All Listings by this Company
Manufacturer:
Nords International AB
Company Name
Nords International AB
Address
Prostårdsvägen 2 Molkom
Postcode
SE-65560
Country
Sweden
General Email
ralph.abraham@nordsinternational.com

View All Listings by this Company

Print This Approval

#240902702

Range of WC dual flush drop valves operated via a two-push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
240902702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Ø59 mm
Marking:
Xiamen NAT Plumbing Logo on body
Installation Requirements:
R001 R571 R572 R582
Expiry date:
30/09/2029
Model:
NB209 & NB208
Product Images
Approval Holder:
XIAMEN NAT PLUMBING INC.
Company Name
XIAMEN NAT PLUMBING INC.
Address
3RD FLOOR, BLDG.4, WEST HOUXIANG ROAD, HAICANG, XIAMEN, P.R.CHINA H
Phone
+86-592-6538317

View All Listings by this Company
Manufacturer:
XIAMEN NAT PLUMBING INC.
Company Name
XIAMEN NAT PLUMBING INC.
Address
3RD FLOOR, BLDG.4, WEST HOUXIANG ROAD, HAICANG, XIAMEN, P.R.CHINA H
Phone
+86-592-6538317

View All Listings by this Company

Print This Approval

#240902710

Range of wall mounted, electronic tap assemblies which are set within a mirrored cabinet unit. The flow is controlled by a solenoid valve assembly and is activated via infra-red non touch operation. The units also incorporate a soap dispenser and hand dryer or paper towel dispenser. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
1340 Hand-wash units
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” BSP (M)
Marking:
Delabie on front of mirror cabinet. Delabie, model and other technical information on adhesive label on body of installation unit.
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
Mirror cabinet with 4 functions: 510203 (mirror, soap dispenser, hand dryer and electronic tap). 510204 (mirror, soap dispenser, hand dryer and electronic tap). 510205 (mirror, soap dispenser, paper towel dispenser and electronic tap). 510206 (mirror, soap dispenser, paper towel dispenser and electronic tap). Unit for installation behind a mirror: 510205I (soap dispenser, paper towel dispenser and electronic tap) Model added October 2024 Unit for installation behind a mirror 510203I (Electronic tap, soap dispenser and hand dryer)
Product Images
Approval Holder:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

Print This Approval

#240902017

Range of copper or stainless-steel brazed heat exchangers available with various number of plates as listed below. Maximum working pressure 25.0 Bar (copper brazed models). Maximum working pressure 10.0 Bar (stainless steel brazed models). Maximum operating temperature 100.0°C.

Section:
1350 Heat Exchangers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
4G3/4 models = ¾” BSP, 4AYB models = 8mm porthole (XB05H-1-xx-2STS_10/10_S1_4AYB Only) or 15mm porthole for all other models, 4clip models = 15mm ID clip connection.
Marking:
DANFOSS logo, model code, date of manufacture (YYYY/WW), PN and other technical data laser engraved into the body.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
XB05M-1-xx-2CU_25/25_S1_4G3/4, XB05X-1-xx-2CU_25/25_S1_4G3/4, XB05H-1-xx-2CU_25/25_S1_4G3/4, XB05X-1-xx-2STS_10/10_S1_4G3/4, XB05H-1-xx-2STS_10/10_S1_4G3/4, XB05H-1-xx-2CU_25/25_S1_4AYB, XB05X-1-xx-2CU_25/25_S1_4AYB, XB05H-1-xx-2STS_10/10_S1_4AYB, XB05X-1-xx-2STS_10/10_S1_4AYB, XB05H-1-xx-2STS_10/10_S1_4AYB, XB05X-1-20-2CU_25/25_S1_4Clip, XB05X-1-20-2STS_10/10_S1_4Clip, XB05H-1-xx-2CU_25/25_S1_4Clip, XB05H-1-xx-2STS_10/10_S1_4Clip. XB05 - frame size (XB05 = 312 mm x 76 mm) M, X, H - heatplate corrugation (different dimple design) - 1 - one pass heat exchanger (all XB05 range is one pass) “xx” = number of plates from 8 to 70. HP material = always 2; meaning material of heatplate which is always 1.4404. Brazing material = Stainless steel brazed = StS, Copper brazed = Cu. Pressure = approved pressure for primary and secondary channels (for XB05 is 25 bar when copper brazed and 10 bar when stainless steel brazed visible from application list in 202_f2). Connection configuration = position of connections (on XB05 only S1 applies). Connection type = G3/4 threaded ¾ connections AYB -no connections. Clip - tailormade solder and / or clip connections; usually tailormade for specific customer.
Product Images
Approval Holder:
Danfoss A/S
Company Name
Danfoss A/S
Address
Nordborgvej 81 6430 Nordborg
Country
Denmark
Phone
+74 88 22 22
General Email
danfoss@danfoss.com

View All Listings by this Company

Print This Approval

#240902007

Range of water meters with either cast iron (blue epoxy coated) or stainless-steel bodies, transducers and EPDM rubber O-rings. Maximum working pressure 25.0 Bar. Maximum operating temperature 50.0°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Flanged - DN40 to DN100.
Marking:
Weihai Ploumeter Co., Ltd. Model number and product information on data plate.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
SC7
Product Images
Approval Holder:
Weihai Ploumeter Co., Ltd.
Company Name
Weihai Ploumeter Co., Ltd.
Address
No. 576 South of Torch Road, Huancui District, Weihai, Shandong Province
Country
China

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 1735 of 2278

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.