We'll be Offline on Thursday Afternoon!

On Thursday the 31st July the site will be unavailable between 1:00pm - 4:00pm BST - to carry out some planned upgrade work.

Directory Search Results

Print List

#2110026

A range of wall mounted two hole single outlet (fixed) electronically controlled tap assemblies with brass bodies (various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor on the underside of the tap. The inlets of the function block incorporate stainless steel strainers, plastic silencers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2110026
Note:
The 16 180 180 Axor Basic set is not approved in its own right.
Size:
¾” BSP (F) to basic set
Marking:
AXOR (brand of Hansgrohe SE) on face plate.
Installation Requirements:
R001 R010 R040 R570
Expiry date:
31/10/2026
Model:
Concealed Valve: 16 180 180 Axor Basic set. Which must be installed with one of the following trim sets: 39 117 xxx Axor Citterio with spout 160 mm. 39 118 xxx Axor Citterio with spout 220 mm. 38 119 xxx Axor Uno with spout 165 mm. 38 120 xxx Axor Uno with spout 225 mm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2110097

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2110097
Size:
½” BSP (M)
Marking:
Fluidmaster on cistern. Schwab brandname on operating button.
Installation Requirements:
R001 R556
Expiry date:
31/10/2026
Model:
5-474-025 UP FRONT-TOP 187 - 747 (cistern only). 5-398-070 DUPLO WC 187 83 cm 747 FV (cistern with frame).
Product Images

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company

Print This Approval


#2111318

Range of check valve cartridges with plastic bodies to be housed in specifically dimensioned bodies. The product incorporates a plastic flow regulator. Maximum working pressure 16.0 bar & maximum operating temperature 65°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2111318
Size:
DN10
Marking:
Neoperl, flow arrow, CV14 on body.
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
Description Part Code CV14-FR 1.0 gpm 31.4143.0 CV14-FR 2,0L 31.4144.0 CV14-FR 3,0L 31.4146.0 CV14-FR 3,5L 31.4147.0 CV14-FR 4,0L 31.4148.0 CV14-FR 1.2 gpm 31.4149.0 CV14-FR 5,0L 31.4150.0 CV14-FR 1.5 gpm 31.4151.0 CV14-FR 6,0L 31.4152.0 CV14-FR 1.75 gpm 31.4153.0 CV14-FR 7,0L 31.4154.0 CV14-FR 2.0 gpm 31.4155.0 CV14-FR 8,0L 31.4156.0 CV14-FR 2.2 gpm 31.4157.0 CV14-FR 9,0L 31.4158.0 CV14-FR 2.5 gpm 31.4159.0 CV14-FR 10,0L 31.4160.0 CV14-FR 12,0L 31.4164.0 CV14-FR 15,0L 31.4165.0
Product Images

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2110334

Range of non-verifiable double check valve assemblies (DZR brass bodies) incorporating spherical valves and either red or blue butterfly handles. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2110334
Size:
See model.
Marking:
Airaga Logo, date of manufacturer (YYWW), flow arrow, CR, PN and size on body.
Installation Requirements:
R001
Expiry date:
31/10/2026
Model:
119-1003 – ½” BSP (F) x 15mm compression 119-1004 - ½” BSP (F) x 15mm compression 119-1005 CST – ½” BSP (F) x ½” BSP (F) 119-1006 CST - ½” BSP (F) x ½” BSP (F) 119-1007 CST – ¾” BSP (F) x ¾” BSP (F) 119-1008 CST - ¾” BSP (F) x ¾” BSP (F)
Product Images

Approval Holder:
Altecnic Limited
Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company
Manufacturer:
Airaga Rubinetterie Spa
Company Name
Airaga Rubinetterie Spa
Address
Via Per Briga 42 28024 Gozzano Novara
Country
Italy
General Email

View All Listings by this Company

Print This Approval


#2112300

Range of double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body (chrome plated or brass finish) with a port located between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2112300
Size:
See model
Marking:
Caleffi logo, CR, flow arrow on body
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
39244 - 1/2” BSP(M) x1/2” BSP(M), chrome plated 303815 (15mm compression, chrome plated) 303840 (15mm compression, brass finish)

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 174 of 828

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.