Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2107524

'FY-6 (white coloured) & FY-5 (blue coloured)'. Factory applied epoxy powder coatings. Apply and cure as per manufacturer's instructions ‘fyzj2020925 version 1' dated '2020-9-20'. For use with water up to 85°C.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2107524
Expiry date:: 31/07/2026

Approval Holder:: Cangzhou Feiyue Plastic Products Co. Ltd.

Company Name
Cangzhou Feiyue Plastic Products Co. Ltd.
Address
Huangguantun Industrial Park, Cangzhou City, Hebei Province

View All Listings by this Company

WRAS Approval Number: #2107533

`Jotaguard VA 5001`. Factory applied, dark blue coloured fusion bonded epoxy coating. Apply and cure as per manufacturers test method document no. '39.40.014', issue date '02.01.2018', revision no. '02'. For use with water up to 85°C.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2107533
Expiry date:: 31/07/2026

Approval Holder:: Jotun India Pvt Ltd.

Company Name
Jotun India Pvt Ltd.
Address
D-280 Ranjangao MIDC, Village Karegaon, Tal-Shirur, Pune-412220
Country
India

View All Listings by this Company

WRAS Approval Number: #2106521

'Jazeera Proofex (formerly known as Jazeera Proof DW)'. Site applied, two-component, grey coloured cementitious coating. Mix Part A (grey coloured powder) with Part B (white, opaque liquid) in a 2:1 mass ratio. Cure for 28 days@25°C. For use with water up to 40°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5038 Coatings, Paints & Linings
Section Subtitle:: Site applied concrete coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:: 2106521
Expiry date:: 30/06/2026

Approval Holder:: Jazeera Factory for Paints Co (KSA)

Company Name
Jazeera Factory for Paints Co (KSA)
Address
Ammara Street, Aseer Industrial Area, PO Box 1900, Khamis Mushayt, 61961
Country
Saudi Arabia
Phone
+966 07 2211111

View All Listings by this Company

WRAS Approval Number: #2105510

'Brushbond FLXIII'. Site applied, grey coloured, two-part elastomeric/cementitious coating. Mix and apply in accordance with manufacturer's instructions 'v10' dated October 2020. Cure coat 1 for 18 hours@7°C. Cure coat 2 for 21 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5042 Coatings, Paints & Linings
Section Subtitle:: Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:: 2105510
Expiry date:: 31/05/2026

Approval Holder:: Fosroc International

Company Name
Fosroc International
Address
Drayton Manor Business Park, Coleshill Road, Tamworth, Staffs.
Postcode
B78 3XN

View All Listings by this Company

WRAS Approval Number: #2104548

'Acrylatik'. Site applied, Acrylate primers available in white, red, blue and black colours. Apply as per manufacturer's instructions 'Appendix No. 1, TU 2316-002-92 872914-2016' dated '11.02.2016'. Cure for 20 minutes@20°C and then 20 minutes@90°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5042 Coatings, Paints & Linings
Section Subtitle:: Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:: 2104548
Expiry date:: 30/04/2026

Approval Holder:: LLC 'ShLKZ' Paints Belogorya

Company Name
LLC 'ShLKZ' Paints Belogorya
Address
309295, Belgorod Region, Shebekino, st. Rzhevskoe shosse,16, Floor 1, Office 02
Country
Russian Federation

View All Listings by this Company