Directory Search Results

Print List

#2106010

Range of crimp fittings with a bronze body incorporating EPDM O-rings. For use with copper pipe manufactured to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2106010
Size:
See model.
Marking:
Conex Universal Limited logo: >B<, WRAS and size on fitting body.
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
HZ Valve adaptor: HZC625101: 15mm crimp joint X ½” BSP (M). HZC625102: 22mm crimp joint X ¾” BSP (M). HZC625103: 28mm crimp joint X 1” BSP (M). HZC625104: 35mm crimp joint X 1 ¼” BSP (M). HZC625105: 42mm crimp joint X 1 ½” BSP (M). HZC625106: 54mm crimp joint X 2” BSP (M).
Product Images

Approval Holder:
Conex Universal Limited
Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company
Manufacturer:
IBP Instalfittings sp ZOO
Company Name
IBP Instalfittings sp ZOO
Address
General Email

View All Listings by this Company

Print This Approval


#2104334

Dual flush, WC outlet valve with internal overflow, operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2104334
Size:
62.12mm ∅
Marking:
Geberit and Type 212 on body
Installation Requirements:
R001 R571
Expiry date:
30/04/2026
Model:
Geberit Type 212 Flush Valve Models added October 2021: Geberit Type 212 Flush Valve – for Omega Cisterns Geberit Type 212 Flush Valve – for Sigma and Delta Cisterns

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2106317

Range of single and dual flush WC outlet valves with ABS body and EPDM seating washers. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2106317
Size:
2” BSP (M)
Marking:
Geberit & Type printed on body.
Installation Requirements:
R001 R571
Expiry date:
30/06/2026
Model:
Geberit Type 290
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2106318

Dual flush WC outlet valve with ABS body and EPDM seating washers. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2106318
Size:
2” BSP (M)
Marking:
Geberit & Type on body.
Installation Requirements:
R001 R571
Expiry date:
30/06/2026
Model:
Geberit Type 240
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2105021

Range of wastewater heat recovery systems incorporating a double wall stainless steel corrugated pipe. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1350 Heat Exchangers
WRAS Approval Number:
2105021
Note:
Tangit upv-c solvent cement used on joints.
Size:
¾” BSP (F) inlet x outlet.
Marking:
Zypho logo, model name, serial number, WRAS and other product info on adhesive label located on body.
Installation Requirements:
R001
Expiry date:
31/05/2026
Model:
ZYPHO PiPe 55 DW. ZYPHO PiPe 60 DW. ZYPHO PiPe 65 DW.

Approval Holder:
Zypho, SA
Company Name
Zypho, SA
Country
Portugal
Phone
+351 210 991 351
General Email
b2b@zypho.pt

View All Listings by this Company
Manufacturer:
Zypho, SA
Company Name
Zypho, SA
Country
Portugal
Phone
+351 210 991 351
General Email
b2b@zypho.pt

View All Listings by this Company

Print This Approval


#2104019

Range of unvented electric storage water heaters consisting of a mild steel, glass/enamel coated tank, heating element and pressure relief valve set at 6.0 bar. Maximum working pressure 5.5 bar. Maximum operating temperature 75°C.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2104019
Size:
½” BSP (M) inlets and outlets
Marking:
Hyco logo on front of appliance. Technical information on adhesive label on side of appliance.
Installation Requirements:
R001 R140
Expiry date:
30/04/2026
Model:
Unvented 2kW version: SF05K (5 litre), SF10K (10 litre) & SF15K (15 litre). Unvented 1.2kW version: SF10K12 (10 litre) & SF15K12 (15 litre).

Approval Holder:
Hyco Manufacturing Ltd
Company Name
Hyco Manufacturing Ltd
Address
California Drive, Castleford, West Yorkshire
Postcode
WF10 5QH

View All Listings by this Company

Print This Approval


#2104060

H4000 range of helical rotor bulk water meters, with blue epoxy coated cast iron bodies and NBR ‘O’-rings. Maximum working pressure 16.0 Bar. Cold water use only.

Section:
1505 Water Meters
Size:
DN40 - 300 flanged
Marking:
Honeywell or Elster on cap. Honeywell, DN, model number and other technical info on meter face surround. Flow arrow, size and other info on body.
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
H4000 range
Product Images

Approval Holder:
Elster Water Metering Limited
Company Name
Elster Water Metering Limited
Address
130 Camford Way Sundon Park Luton
Postcode
LU3 3AN
Country
United Kingdom
Phone
01582 846 400
General Email
matthew.ward@honeywell.com

View All Listings by this Company

Print This Approval


#2105313

Range of flow meters incorporating black epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Size:
See model
Marking:
GWF, Nominal diameter, year of manufacture (YYYY), temp class, install conditions, max pressure, type edge (meter type) manufacturer & other technical information on data label on meter housing
Installation Requirements:
R001
Expiry date:
31/05/2026
Model:
Sonico Edge Range Available in the following sizes: Inlet 50mm Length 200mm, 270mm & 300mm Inlet 65mm Length 200mm & 300mm Inlet 80mm Length 200mm, 225mm, 300mm, 350mm, 370mm & 413mm Inlet 100mm Length 250mm, 350mm, 360mm, 370mm & 483mm Inlet 125mm Length 250mm Inlet 150mm Length 300mm & 500mm
Product Images

Approval Holder:
GWF AG
Company Name
GWF AG
Address
Obergrundstrasse 119 Lucerne
Postcode
6005
Country
Switzerland
Phone
+41 41 319 51 77
General Email
moritz.roettger@gwf.ch

View All Listings by this Company

Print This Approval


#2106022

Range of water meter manifolds incorporating DZR brass bodies, PTFE washers, a non-return valve and ball valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Size:
¾” BSP (F) inlet and outlet
Marking:
MWM, CR & flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
WBBADAPT112-BV

Approval Holder:
MWM Distributors Ltd
Company Name
MWM Distributors Ltd
Address
Units 52 & 53 Enfield Industrial Estate Windsor Road
Postcode
B97 6DE
Country
Redditch
Phone
+44 (0) 1527 68200
General Email
sales@mwmdistributorltd.com

View All Listings by this Company

Print This Approval


#2101303

Screw down elbow servicing valve with brass body (brushed chrome) which is intended to connect to an appliance, e.g. washing machine, dishwasher to the water supply. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
1530 Miscellaneous Fittings
Size:
10mm compression inlet x 14.52mm hose union connection outlet
Marking:
Schell and schell logo on operating member. Flow arrow on body.
Installation Requirements:
R001 R040
Expiry date:
31/01/2026
Model:
03 500 06 99
Product Images

Approval Holder:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company
Manufacturer:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 172 of 1122

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.