Directory Search Results

Print List

#2107554

"Bond-It Tanking Slurry". Site applied, grey coloured, two part (powder & water) cementitious waterproof coating. Mix and apply as per manufacturer`s instructions 'Version 9' dated 06/08/20. Cure for 12 days at 7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5038 Coatings, Paints & Linings
Section Subtitle:
Site applied concrete coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:
2107554
Expiry date:
31/07/2026

Approval Holder:
Seal It Services Ltd. T/A Bond It
Company Name
Seal It Services Ltd. T/A Bond It
Address
Unit G16, River Bank Way, Lowfields Business Park
Postcode
HX5 9DN
Country
Elland,
Phone
01422 315 300

View All Listings by this Company

Print This Approval


#2109529

`Belzona 1321`. Site applied, two-part, epoxy amine coating available in grey or blue colours. Mix base and hardener in a 11:1 mass ratio. Apply and cure as per manufacturer’s IFU ‘FN10026’, publication number ’02-09-21’. For use with water up to 23°C. These materials are only approved for the mixing conditions that appear on the approval. If the mixing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5042 Coatings, Paints & Linings
Section Subtitle:
Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:
2109529
Expiry date:
30/09/2026

Approval Holder:
Belzona Polymerics Ltd.
Company Name
Belzona Polymerics Ltd.
Address
Claro Road, Harrogate, Yorks.
Postcode
HG1 4AY
Phone
+44 1423 567641 Fax: 01423 505967

View All Listings by this Company

Print This Approval


#2109551

'Orgal® Hydroflex 10'. White coloured, acrylic polymer emulsion cement modifier, which is a liquid additive intended to be mixed with cement to achieve a coating. Mix cement:additive:water in a 197.5:30:10 mass ratio and apply as per manufacturer's instructions '2/18'. Cure for 28 days@23°C and @50% relative humidity. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5051 Concrete, Cement and Mortar
Section Subtitle:
Fibre Additives.
WRAS Approval Number:
2109551
Expiry date:
30/09/2026

Approval Holder:
Organik Kimya San. ve Tic. A.Ş.
Company Name
Organik Kimya San. ve Tic. A.Ş.
Address
Mimarsinan Mah. Cendere yolu no:146 Kemerburgaz, Eyüp, İstanbul
Country
Turkey

View All Listings by this Company

Print This Approval


#2109531

`Ruby Veg Soft Soap/EasyJoint Uni`. Translucent, amber coloured, soya oil lubricant. Apply as per manufacturer's technical datasheet 'revision 2' dated '22/09/21'. For use with water up to 23°C.

Section:
5160 Lubricants
Expiry date:
30/09/2026

Approval Holder:
Delf (UK) Ltd.
Company Name
Delf (UK) Ltd.
Address
Unit 2 Hickmans Road, Birkenhead, Merseyside
Postcode
CH41 1JH

View All Listings by this Company

Print This Approval


#2109545

'VICTREX' injection moulded PEEK thermoplastic materials. For use with water up to 85°C. VICTREX PEEK 450GL30, 450G, 450FE20 (natural – appears beige coloured), 450FC30, 450CA30 & 90GL30BLK-EU (black coloured). VICTREX FG™100, FG™120, FG™200, FG™220, FG™300 & FG™ 325 (natural – appears beige coloured). VICTREX FG™101, FG™121, FG™140, FG™201, FG™221, FG™240, FG™301 & FG™320 (black coloured). VICTREX FG™340 (dark grey coloured).

Section:
5220 Polyether Ether Ketone
Expiry date:
30/09/2026

Approval Holder:
Victrex Manufacturing Ltd./VICTREX Plc.
Company Name
Victrex Manufacturing Ltd./VICTREX Plc.
Address
Victrex Technology Centre Hillhouse International Thornton Cleveleys
Postcode
FY5 4QA
Country
Lancashire
Phone
01253 897700 Fax: 01253 897701

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 168 of 805

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.