A range of black polyethylene electrofusion fittings from DN 20 to DN 1200 for use with PE100 and PE100-RC pipes conforming to EN 12201 or ISO 4427. A range of black polyethylene butt-welded fittings from DE 20 to DE 1200 fittings for use with PE100 and PE100-RC pipes conforming to EN 12201 or ISO 4427. Maximum working pressure: 20.0 bar for SDR 9 Maximum working pressure: 16.0 bar for SDR 11 Maximum working pressure: 10.0 bar for SDR 17. For above and below ground and cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241204003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Plastialia logo, DN, PE100-RC, model code hot stamped on fitting body

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

ELECTROFUSION FITTINGS PLASTFAST RANGE DN20 to DN400 PLAST RANGE DN450 to DN1200 BUTTWELDED FITTNGS PLAST RANGE DN 20 to DN1200 COUPLER MPXXXB - COUPLER SDR 17 - DN 90 – DN1200 MPXXXC - COUPLER SDR 11 - DN 20 – DN900 MPXXXG - COUPLER SDR 9 - DN 32 – DN450 ELBOW 90° GE9PXXXC - ELBOW 90° SDR 11 - DN 20 – DN315 ELBOW 45° GE4PXXXC - ELBOW 45° SDR 11 - DN 20 – DN 315 ELBOW 22.5° GE2250PXXXC - ELBOW 22,5° SDR 11 - DN 90 – DN 315 ELBOW 11,25° GE1125PXXXC - ELBOW 11,25° SDR 11 - DN 90 – DN 315 TEE 90° TEPXXXC - TEE 90° SDR 11 - DN 20 – DN 315 REDUCED TEE 90° TREPXXXC - REDUCED TEE 90° SDR 11 - DN 90 – DN 315 DN REDUCER REPXXXC - REDUCER SDR 11 - DN 25 – DN 315 END CAP CAEPXXXC - END CAP SDR 11 - DN 20 – DN 315 TAPPING TEE CPCPXXXC - TAPPING TEE SDR 11 - DN 40 – DN 315 CPCPVXXXC - VALVE TAPPING TEE SDR 11 - DN 63 – DN 315 SADDLE CPSPXXXC - SADDLE SDR11 – DN 20 – DN 900 SPIGOT END FITTING ADAPTER FOR FLANGES CPXXXB - ADATTATORE PER FLANGE SDR 17 - DN 90 – DN 1200 CPXXXC - ADATTATORE PER FLANGE SDR 11 - DN 20 – DN 900 CPXXXG - ADATTATORE PER FLANGE SDR 9 - DN 32 – DN 450 END CAPS CAPXXXB - END CAP SDR 17 - DN 90 – DN 1200 CAPXXXC - END CAP SDR 11 - DN 20 – DN 900 CAPXXXG - END CAP SDR 9 - DN 32 – DN 450 TEE 90° TPXXXB - TEE 90° SDR 17 - DN 90 – DN 630 TPXXXC - TEE 90° SDR 11 - DN 20 – DN 630 TPXXXG - TEE 90° FROM DE 63 TO DE 630 SDR 9 - DN 32 – DN 450 REDUCED TEE 90° TRPXXXB - REDUCED TEE 90° SDR 17 - DN 90 – DN 630 TRPXXXC - REDUCED TEE 90° SDR 11 - DN 90 – DN 630 TRPXXXG - REDUCED TEE 90° SDR 9 - DN 110 – DN 450 CROSS CRPXXXB - CROSS SDR 17 - DN 90 – DN 355 CRPXXXC - CROSS SDR 11 - DN 63 - DN, 355 TEES 45° T4PXXXB - TEE 45° SDR 17 - DN 90 – DN 160 T4PXXXC - TEE 45° SDR 11 - DN 20 – DN 160 ELBOW 90° G9PXXXB - ELBOW 90° SDR 17 - DN 90 – DN 630 G9PXXXC - ELBOW 90° SDR 11 - DN 20 – DN 630 G9PXXXG - ELBOW 90° SDR 9 - DN 63 – DN 450 ELBOW 45° G4PXXXB - ELBOW 45° SDR 17 - DN 90 – DN 630 G4PXXXC - ELBOW 45° SDR 11 - DN 20 – DN 630 G4PXXXG - ELBOW 45° SDR 9 - DN 63 – DN 450 DN REDUCER FITTINGS RPXXXB - REDUCER SDR 17 - DN 110 – DN 1200 RPXXXC - REDUCER SDR 11 - DN 25 – DN 900 RPXXXG - REDUCER SDR 9 - DN 250 – DN 450 TRANSITIONAL FITTINGS RTOMPXXXC - MALE TRANSITION PE/BRASS SDR 11 – DE 20x1/2”, 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” RTOFPXXXC - FEMALE TRANSITION PE/BRASS SDR 11 - DE 20x1/2”, 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” RTFZRPXXXC - MALE TRANSITION PE/STEEL SDR 11 - DE 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” 125x4”, 140x5”, 160x6”, 180x6”, 225x8”, 315x10” RTSRPXXXC - WELD TRANSITION PE/STEEL SDR 11 - DE 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” 125x4”, 140x5”, 160x6”, 180x6”, 225x8”, 315x10” First part explains the type of product (e.g. “M = coupler”, “GE9 = 90°elbow”, etc.) PXXXX is the dimension. B, C and G represent the different SDR.

Product Images

Manufacturer:

Plastitalia SpA

Company Name

Plastitalia SpA

Address

Via Ferrara SNC, Brolo 98061

Country

Italy

View All Listings by this Company

Range of WC dual flush drop valve comprising of a plastic body, silicone seating washer and an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2107159

Note:

Open outlet use only.

Size:

See models.

Marking:

Plumbright on the body. WRAS & Model code on body

Installation Requirements:

R001 R571

Expiry date:

31/07/2026

Model:

137004 PLUMBRIGHT: 1½” BSP (M),

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Push button pneumatically operated single flush WC drop valve, incorporating an internal overflow. For use with cold water only

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

241201702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP Outlet

Marking:

Eco cistem on top face of assembly.

Installation Requirements:

R001 R571

Expiry date:

31/12/2029

Model:

Eco Cistem outlet valve

Approval Holder:

The Green Futures Initiative Limited

Company Name

The Green Futures Initiative Limited

Address

Firlands Mill Leeds West Yorkshire

Postcode

LS28 8AD

Country

United Kingdom

View All Listings by this Company

Manufacturer:

The Green Futures Initiative Limited

Company Name

The Green Futures Initiative Limited

Address

Firlands Mill Leeds West Yorkshire

Postcode

LS28 8AD

Country

United Kingdom

View All Listings by this Company

Range of WC dual flush drop valves with an ABS body and silicone seal. The valves are operated via a push button or lever assembly for either full or reduced flush and incorporate an internal adjustable height overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250404705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1 ½” BSP (M) & 2” BSP (M)

Marking:

Fluidmaster on body

Installation Requirements:

R001 R556 R571

Expiry date:

30/04/2030

Model:

PRO550UK: 1½" Base, 350mm Cable, Dual Flush Button, PRO550LC: 1½" Base, 550mm cable, Dual flush button. 550073: 1½" Base + 2 in adaptor, 350 mm button/cable 550074: 1½" Base + 2 in adaptor, 350 mm button/cable- C360101: 1 ½” base + 2 in adaptor, 350 mm button/cable. C360102: 2” Base, 550mm cable, Dual flush button. PRO750UK & 750074: 1½” BSP Male Outlet

Approval Holder:

Fluidmaster UK

Company Name

Fluidmaster UK

Address

Twyford Road Rotherwas Industrial Estate Hereford

Postcode

HR2 6JR

View All Listings by this Company

Manufacturer:

BESSTER (XIAMEN) TECHNOLOGY

Company Name

BESSTER (XIAMEN) TECHNOLOGY

Address

9-10 BUILDING, SIMING XIAMEN, FUJIAN

Postcode

361100

Country

China

View All Listings by this Company

Range electric, instantaneous, open outlet, mains water heaters. Maximum working pressure 6.6 bar. Maximum operating temperature 70 ˚C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

250304707

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

REDRING (brand of RK Wholesale Limited) model name, max static pressure, min working pressure on adhesive label.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

078421 078438 078391

Product Images

Approval Holder:

RK Wholesale Limited.

Company Name

RK Wholesale Limited.

Address

Berry Hill Road, Berryhill Trading Estate

Postcode

ST4 2NL

View All Listings by this Company