Directory Search Results

Print List

#240402709

Range of Indirect and direct unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 6.0 bar at 90˚C and an expansion relief valve set at 4.5 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check cartridge, verified by test (suitable for backflow protection against fluid category 2) an expansion vessel and tundish. Maximum working pressure: Secondary: 4.0 Bar Primary: 3.0 Maximum operating temperature 99.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Secondary: 22mm compression Primary: 22mm compression
Marking:
Gledhill logo, model name, capacity, max pressure, date of manufacture (D/MM/YYYY) and other technical information on label on body.
Installation Requirements:
R001 R140 R360
Expiry date:
30/04/2029
Model:
Direct: SESINPDR090 SESINPDR120 SESINPDR150 SESINPDR170 SESINPDR200 SESINPDR250 SESINPDR300 Indirect: SESINPIN090 SESINPIN120 SESINPIN150 SESINPIN170 SESINPIN200 SESINPIN250 SESINPIN300

Approval Holder:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company
Manufacturer:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company

Print This Approval


#2104083

Range of air venting valves incorporating an epoxy coated, iron body and a drain point. Maximum working pressure 16.0 bar. Maximum operating temperature 60˚C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2104083
Note:
Fittings in this section are suitable for above ground installations only.
Size:
See model.
Marking:
Saint-Gobain PAM, DN, PN, model and year of manufacture (YYYY) on data plate. Size and year of manufacture (YYYY) on body.
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
Double orifice FB/L 1” & 2” BSP female inlet. DN50 - DN200. Double orifice with anti-surge FBA/LA 1” & 2” BSP female inlet DN50 - DN200. Double orifice with rapid fill protection FBR/LR 1 & 2” BSP female inlet DN50 - DN200.

Approval Holder:
Saint-Gobain PAM Italia s.r.l
Company Name
Saint-Gobain PAM Italia s.r.l
Address
Via Bensi 8-20152
Country
Italy

View All Listings by this Company
Manufacturer:
Saint-Gobain PAM Italia s.r.l
Company Name
Saint-Gobain PAM Italia s.r.l
Address
Via Bensi 8-20152
Country
Italy

View All Listings by this Company

Print This Approval


#2104084

Range of wall mounted, concealed, manually operated blending valves with brass bodies (various finish trim kits - see model) incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2104084
Note:
This approval does not include a shower hose, shower handset or spout outlet.
Size:
½” BSP (F)
Marking:
Bagnodesign on faceplate.
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2026
Model:
BRISTOL CONCEALED SHOWER MIXER BDM-BIS-410L-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS) Burgundy (BUR) Black (MB-C)

Approval Holder:
BAGNODESIGN
Company Name
BAGNODESIGN
Address
UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL
Postcode
WF17 9LU

View All Listings by this Company

Print This Approval


#240502027

Wall mounted thermostatic bar shower mixers (chrome plated brass body) incorporating a 2 way ceramic disc diverter headwork controlling the flow between the overhead shower and handset with either a dome or cube type operating member. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button with either a dome or cube type operating member. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 3.0 Bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240502027
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” (M) x ½” (M) offset union
Marking:
JELS logo and WRAS on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2029
Model:
JL3133C-3146 (SK005) & JL3148C-3118 (SK006)
Product Images

Approval Holder:
Ningbo Jieyi Sanitary Ware Co., Ltd.
Company Name
Ningbo Jieyi Sanitary Ware Co., Ltd.
Address
No.10 Yaobei Road, Simen Town, Yuyao, Ningbo
Country
China

View All Listings by this Company

Print This Approval


#240588003

Wall mounted, exposed, thermostatic bar type shower mixing valve (brass body, various finishes - see model). The product incorporates a 2-way ceramic disc diverter headwork with a single lever operating member controlling the flow to either shower outlet. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member and a manual override button. The product is supplied with a shower riser, overhead shower, shower hose and shower handset. The inlets incorporate a combined washer and stainless-steel strainer, as well as an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240588003
Size:
15mm compression.
Marking:
Ideal Standard on shower valve body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2029
Model:
BD579XX Ceratherm Alu+ Thermostatic Shower System. Where XX denotes finish and can be replaced by: RO = Rose, SI = Silver, XG = Matt Black.

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1634 of 2250

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.