'GCF-SRC'. Factory applied, grey coloured cement mortar. Mix sand, cement and water in a ratio of 4:2:1 and apply as per manufacturer's instructions 'QC-WI-8.1.8, revision 2/0, issue date 30/10/2021'. Cure for 28 days@24°C. For use with water up to 65°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2308503

Expiry date:

31/08/2028

Approval Holder:

Greater Cairo Foundries Co. S.A.E (GCF)

Company Name

Greater Cairo Foundries Co. S.A.E (GCF)

Address

Inshas Desert Road, Al Sharkia, Egypt

View All Listings by this Company

'Epilux QD DW Coating - Blue'. Factory applied, blue coloured, two-component epoxy coating. Mix Base and Catalyst in a 3:1 volume ratio and apply as per manufacturer's 'Product Information Data Sheet No: 780', 'Revision: 00', 'Issue Date Feb-22'. Cure for 7 days@30°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2304547

Expiry date:

30/04/2028

Approval Holder:

Berger Paints India Limited

Company Name

Berger Paints India Limited

Address

14 & 15 Swarnamoyee Road, Howrah - 711103, West Bengal

Country

India

View All Listings by this Company

'EPLAMID 66 GFS 30 FW NC'. Natural (appears beige), injection moulded, glass fibre reinforced PA66 material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2304528

Expiry date:

30/04/2028

Approval Holder:

Epsan Plastik San Ve Tic A.S.

Company Name

Epsan Plastik San Ve Tic A.S.

Address

DOSAB A.O.S. Cd. No:16 Bursa, 16369

Country

Turkey

View All Listings by this Company

'EPLAMID 66 GFS 30 FW BK'. Black coloured, injection moulded, glass reinforced PA66 material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2306503

Expiry date:

30/06/2028

Approval Holder:

Epsan Plastik San Ve Tic A.S.

Company Name

Epsan Plastik San Ve Tic A.S.

Address

DOSAB A.O.S. Cd. No:16 Bursa, 16369

Country

Turkey

View All Listings by this Company

‘RADISTRONG® AROMA RV400RKC2 106 NT, RV500RKC2 106 NT & RV600RKC2 106 NT’. ‘RADISTRONG® AROMA RV400RKC2 306 BK, RV500RKC2 306 BK & RV600RKC2 306 BK’. ‘RADISTRONG® AROMA RV300RKC2 106 NT’ & ‘RADISTRONG® AROMA RV300RKC2 306 BK’ were added to the approval in February 2024. Natural (indicated by NT - appear cream in colour) and black coloured (indicated by BK), injection moulded, glass fibre filled (between 30% & 60%), PA66 materials. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2305512

Expiry date:

31/05/2028

Approval Holder:

Radici Novacips SpA

Company Name

Radici Novacips SpA

Country

Italy

View All Listings by this Company