Range of stainless steel lined direct water heaters fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504726

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M)

Marking:

Lochinvar on adhesive label on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

SIVS 66 G E SIVS 100 G E SIVS 110 G E SIVS 130 G E SIVS 165 G E SIVS 220 G E SIVT 66 G E SIVT 100 G E SIVT 110 G E SIVT 130 G E SIVT 165 G E SIVT 220 G E LST 66 G E LSTR 66 G E LST 100 G E LSTR 100 G E LST 110 G E LSTR 110 G E LST 130 G E LSTR 130 G E LST 165 G E LSTR 165 G E LSTR 220 G E LST 220 G E

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Country

Oxon

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of indirect water heaters with an enamel lining, a magnesium sacrificial anode and single wall spiral heat exchanger (maximum working pressure 6.0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 7.0 bar. Maximum operating temperature 80°C

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504724

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F)

Marking:

Lochinvar on adhesive label on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

SIVS 330 G E SIVS 440 G E SIVS 550 G E SIVS 660 G E LST 330 G E LST 440 G E LST 550 G E LST 660 G E

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Country

Oxon

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of direct gas fired condensing storage water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Lochinvar on control board.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

ECH 32-220 CE ECH 33-370 CE ECH 52-370 CE ECH 63-370 CE ECH 87-480 CE ECH 106-480 CE ECH 129-480 CE HWH 32-220 CE HWH 33-370 CE HWH 52-370 CE HWH 63-370 CE HWH 87-480 CE HWH 106-480 CE HWH 129-480 CE WATER HEATERS

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Country

Oxon

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of solar assisted direct gas fired condensing storage water heaters with an enamel lining and a titanium anode incorporating a solar heat exchanger (max. working pressure 6,0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP(M) inlet.

Marking:

Lochinvar on control board.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

HWHC 44-370 CE HWHC 63-370 CE

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Country

Oxon

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of integrated water circuits incorporating a plate heat exchanger. The units incorporate a flow sensor, pressure relief valve set at 3.0 bar, and a primary circuit circulation pump. Maximum working pressure secondary circuit 10.0 bar. Maximum working pressure primary circuit 2.5 bar. Maximum operating temperature 70°C. Cold supply only.

Section:

1478 Heater

Section Subtitle:

Combination boilers - accessories and components.

WRAS Approval Number:

240507702

Size:

IWC Std.: Secondary circuit: ½” BSP (M) inlet x ½” BSP (M) outlet. Primary circuit: ¾” BSP (M) inlet x ¾” BSP (M) outlet. IWC Fgr.: Secondary circuit: F4 connection inlet x ½” BSP (M) outlet. Primary circuit: F4 connection inlet x ¾” BSP (M) outlet. IWC Rgr.: Secondary circuit: ½” BSP (M) inlet x F4 connection outlet. Primary circuit: ¾” BSP (M) inlet x ¾” BSP (M) outlet.

Marking:

Flow groups (IWC Fgr.): Grundfos part code, date of manufacture (DD/MM/YY hh:mm:ss), GRUNDFOS and QR code on adhesive label on body. Return groups (IWC Rgr.): Grundfos name and logo on pump. IWC Std.: Complete products will include the markings of the flow and return groups.

Installation Requirements:

R001 R008

Expiry date:

31/05/2029

Model:

IWC Std. UPM3/UPM4/UPS-xx CHB -xx pl xxx-xxxxxxxx The IWC Std. comprises of the following Flow and Return groups (available separately). IWC Fgr xxx-xxxxxxxx. IWC Rgr UPM3/UPM4-xx CHB xxx-xxxxxxxx. Where (as applicable): -xx = Pump max head. -xx pl = Plate heat exchanger number of plates (10-32). xxx-xxxxxxxx = Replaced by letters and/or numbers and do not have any bearing on water contact parts.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company