Range of booster pumps with stainless steel bodies, plastic impellers, and NBR ‘O’-rings. The products incorporate a temperature sensor, pressure sensor, pressure vessel and a non-return valve integral to the pump chamber. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2204372

Size:

1” BSP (F)

Marking:

SFA Logo, Saniboost Smart, model number other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/04/2027

Model:

Saniboost Smart Intelligent Water Booster Pump.

Approval Holder:

SFA Saniflo UK Ltd

Company Name

SFA Saniflo UK Ltd

Address

Unit 1 Watford Interchange Colonial Way Watford

Postcode

WD24 4WP

Country

United Kingdom

Phone

020 8842 0033

General Email

Graham.davies@sfasaniflo.co.uk

View All Listings by this Company

Range of multistage centrifugal pumps with stainless-steel housings, stainless-steel impellers and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250902720

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN25 - DN200 flanged.

Marking:

Dooch, model, serial number and technical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/09/2030

Proviso:

The discharge from the drain core must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.

Model:

XRLNa-b-c-d Where: XRL = model. With N = Wetted metallic material in SUS316L, Without N = Wetted metallic material in SUS304. a = Rated flow in m³/h (1 – 255). DN25 = 1-3. DN32 = 4-5. DN40 = 10. DN50 = 15-20. DN65 = 32. DN80 = 45. DN100 = 64 or 95. DN150 = 125-155. DN200 = 185-255. b = Number of impellers (stages 1 – 36). DN25 & DN32 models with 1 – 36 stages. DN40 models with 1 – 22 stages. DN50 models with 1 – 17 stages. DN65 models with 1 – 14 stages. DN80 models with 1 – 13 stages. DN100 models with 1 – 8 stages. DN150 models with 1 – 10 stages. DN200 models with 1 – 8 stages. c = Number of cutting impellers (0 – 3). (Note: c can be omitted when c = 0.) d = DN size (DN25 – DN200). (Note: d can be omitted.) E.g., XRL32-7-2-DN65 denotes: Pump is made of SUS304, rated flow 32 m³/h, 7 impellers, 2 cutting impellers and size DN65.

Approval Holder:

SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD

Company Name

SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD

Address

No 239 Zhangliantang Rd Liantang Ind Park Qingpu District Shanghai City China

View All Listings by this Company

Manufacturer:

ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.

Company Name

ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.

Address

NO 669 DAYANG ROAD KANGSHAN STREET HUZHOU ZHEJAING CHINA

View All Listings by this Company

Range of pumps, with stainless steel bodies, impellers and shaft. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250904702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Wilo, made in Korea, Model No., Serial No., website address, & other tech info on data label. Wilo printed on control panel.

Installation Requirements:

R001 R415

Expiry date:

30/09/2030

Model:

PBI-L203EA - Suction 25A(1”) Discharge 25A(1”) PBI-L204EA - Suction 25A(1”) Discharge 25A(1”) PBI-L205EA - Suction 25A(1”) Discharge 25A(1”) PBI-L402EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L403EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L404EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L405EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L802EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-L803EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-LD203EA - Suction 25A(1”) Discharge 25A(1”) PBI-LD402EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD403EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD404EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD405EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD802EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-LD803EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) 1 - Series PBI-L: Electronic Boosting Pump Variable Speed Pump(Inverter Pump). 2 - Number of Pumps None/blank : Single Type (One Pump), D: Duplex Type (Two Pumps). 3 - Rated Flow capacity 2 : 2㎥/hr, 4 : 4㎥/hr, 8 : 8㎥/hr. 4 - Number of Impellers 02 : 2 Impellers, 03 : 3 Impellers, 04 : 4 Impellers, 05 : 5 Impellers. 5 - Power 60Hz L: 110V ~, J: 120V ~ , 127V~, M: 220V~ D: 110V/220V~, I: 220/380V 3~, T: 220V 3~, U: 380V 3~, N: 440V 3~, R: 480V 3~. 50Hz Z: 110V ~, C: 120V ~, 127V~, E: 220V ~, F: 110V/220V ~, G: 220/380V 3~, H: 220V 3~, Q: 380V 3~, Y: 440V 3~. 6 - Automatic mode. None/blank : non automatic models A: models which equips themselves with components that are responsible for automatic mode.

Approval Holder:

WILO Pumps Ltd.

Company Name

WILO Pumps Ltd.

Address

View All Listings by this Company

CM(E) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Maximum operating parameters: Cast iron models: Maximum working pressure 6.0 bar @ 90°C. Maximum working pressure 10.0 bar @ 40°C. Stainless steel models (not self-priming variants): Maximum working pressure 10.0 bar @ 99°C. Maximum working pressure 16.0 bar @ 90°C. Stainless steel self-priming models (CM(E) 1, 3 & 5 (AISI 304) only): Maximum working pressure 10.0 or 16.0 bar @ 60°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251007701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” - 2” BSP (F) or NPT (F) inlet and outlet.

Marking:

Grundfos and Grundfos logo, type, model, manufacturing country and technical information on adhesive labels either on the terminal box or fan cover. Grundfos and Grundfos logo on the terminal box or fan cover.

Installation Requirements:

R001 R415

Expiry date:

31/10/2030

Model:

CM(E)1, CM(E)3 and CM(E)5: CM(E)1, cast iron / AISI304 2 – 8 stages. CM(E)3, cast iron / AISI304 2 – 8 stages. CM(E)5, cast iron / AISI304 2 – 8 stages. CM(E)1, AISI316 2 - 14 stages. CM(E)3, AISI316 2 - 14 stages. CM(E)5, AISI316 2 - 13 stages. CM(E)10 CM(E)15 and CM(E)25: CM(E)10, cast iron / AISI304 1 – 5 stages. CM(E)15, cast iron / AISI304 1 – 4 stages. CM(E)25, cast iron / AISI304 1 – 4 stages. CM(E)10, AISI316 1 – 8 stages. CM(E)15, AISI316 1 – 4 stages. CM(E)25, AISI316 1 – 4 stages. Self-priming models: CM(E)1, AISI304 3 – 6 stages (S or O) CM(E)3, AISI304 3 – 6 stages (S or O) CM(E)5, AISI304 3 – 7 stages (S or O) Model key: CM/CME X1-X2 X3 X4-X5-X6-X7-X8 X9 X10 X11 X11-X12-X13-X14 Where: CM = Centrifugal Modular. CME = Centrifugal Modular with integrated frequency converter. X1 = Rated flow rate at 50 Hz (m³/h): 1-25. X2 = Number of impellers: 1-14. X3 = Pump Versions: A - Basic Version. E: Pumps with certificates/approvals. O: Self-priming version (maximum suction lift 8 metres) (Only available on CM(E) 1, 3 & 5 stainless steel (AISI304) models). S: Self-priming version (maximum suction lift 4 metres) (Only available on CM(E) 1, 3 & 5 stainless steel (AISI304) models). X4 = Pipe connection: R: Rp (ISO 7/1). S: Internal NPT thread. X5 = Material in contact with pump media: A: inlets and outlets parts EN-GJL-200, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. G: Sleeve, Pump shaft + Impellers and chambers EN 1.4401/AISI 316. I: Sleeve, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. X6 = Rubber parts in pump (excluding neck ring and shaft seal): E: EPDM. V: FKM. X7 = Shaft seal: A: O-ring seal with fixed driver. X8 = Material of rotating seal face: Q: Silicon Carbide (SIC). X9 = Material of stationary seal face: Q: Silicon Carbide (SIC). X10 =Material of secondary seal: E: EPDM. V: FKM. X11 = Supply voltage (electrical characteristics - not relevant for the WRAS approval): A/B/B1/B2/C1/E/E1/F/G/H/J/O/S/T/U/V/X. X12 = Motor information(electrical characteristics - not relevant for the WRAS approval): A/B/C/D/EF/G/H/I/J. X13 = Mains plug (electrical characteristics - not relevant for the WRAS approval): A/B/C/D. X14 = Sensor (electrical characteristics - not relevant for the WRAS approval): N: No sensor. Example: CM 10-3 A-R-I-E-A Q Q E C1-A-A-N

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of multistage pumps with stainless steel bodies Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251102713

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SPRING 60-X & 90-X: 1” BSP (F) inlet x 1” BSP (F) outlet, SPRING 120-X: 1¼” BSP (F) inlet x 1” BSP (F) outlet.

Marking:

FUJIAN VIKING INDUSTRY CO.,LTD logo (‘VK Flow’), model and other technical information on data plate.

Installation Requirements:

R001 R415

Expiry date:

30/11/2030

Model:

SPRING 60-X, SPRING 90-X, SPRING 120-X. Where: X denotes the number of stages: 2-5.

Approval Holder:

FUJIAN VIKING INDUSTRY CO.,LTD

Company Name

FUJIAN VIKING INDUSTRY CO.,LTD

Address

No.16，Jincheng road, Tiehu Industrial Zone, Fuan, Fujian,China

View All Listings by this Company

Range of stainless steel or cast iron (with electrolytic coating) bodied, multistage centrifugal pumps with stainless steel impellers. Maximum working pressure: Ranges from 16.0 bar to 30.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251108701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Hydroo, model and product information on data plate fixed on pump bracket. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2030

Model:

VX1 Stainless steel Body – DIN Flange (2 to 40 stages) DN25 (PN25), VX3 Stainless steel Body – DIN Flange (2 to 31 stages) DN25 (PN25), VX5 Stainless steel Body – DIN Flange (2 to 33 stages) DN32 (PN25), VX10 Stainless steel Body – DIN Flange (1 to 22 stages) DN40 (PN25), VX15 Stainless steel Body – DIN Flange (1 to 18 stages) DN50 (PN25), VX20 Stainless steel Body – DIN Flange (1 to 17 stages) DN50 (PN25), VX32 Stainless steel Body – DIN Flange (1 to 16 stages) DN65 (PN30), VX45 Stainless steel Body – DIN Flange (1 to 13 stages) DN80 (PN30), VX65 Stainless steel Body – DIN Flange (1 to 8 stages) DN100 (PN25), VX1 Stainless steel Body – Oval Flange (2 to 26 stages) G1 (F) (PN16), VX3 Stainless steel Body – Oval Flange (2 to 20 stages) G1 (F) (PN16), VX5 Stainless steel Body – Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16), VX10 Stainless steel Body – Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16), VF1 Cast Iron Body – DIN Flange (2 to 40 stages) DN25 (PN25), VF3 Cast Iron Body – DIN Flange (2 to 31 stages) DN25 (PN25), VF5 Cast Iron Body – DIN Flange (2 to 33 stages) DN32 (PN25), VF10 Cast Iron Body – DIN Flange (1 to 22 stages) DN40 (PN25), VF15 Cast Iron Body – DIN Flange (1 to 18 stages) DN50 (PN25), VF20 Cast Iron Body – DIN Flange (1 to 17 stages) DN50 (PN25), VF32 Cast Iron Body – DIN Flange (1 to 16 stages) DN65 (PN30), VF45 Cast Iron Body – DIN Flange (1 to 13 stages) DN80 (PN30), VF65 Cast Iron Body – DIN Flange (1 to 8 stages) DN100 (PN25), VF1 Cast Iron Body – Oval Flange (2 to 26 stages) G1 (F) (PN16), VF3 Cast Iron Body – Oval Flange (2 to 20 stages) G1 (F) (PN16), VF5 Cast Iron Body – Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16), VF10 Cast Iron Body – Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16).

Approval Holder:

HYDROO PUMP INDUSTRIES S.L.

Company Name

HYDROO PUMP INDUSTRIES S.L.

Postcode

17843

Country

Spain

General Email

jordi.armengol@hydroo.com

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. Maximum operating temperature 35°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250702730

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

U3 & U5 : 1” BSP (F) inlet x 1” BSP (F) outlet. U7 : 1¼” BSP (F) inlet x 1” BSP (F) outlet. U9 : 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U18 : 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Felsom, Exa Pumps Srl, model and other technical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/07/2030

Proviso:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Model:

ULTRA range: U 3 – XX/Y, U 5 – XX/Y, U 7 – XX/Y, U 9 – XX/Y, U 3 – XX/Y T, U 5 – XX/Y T, U 7 – XX/Y T, U 9 – XX/Y T, U 18 – XX/Y T. (U) 3/5/7/9/18 = nominal flow rate in m³/h. XX = nominal power HPx100. U3/T (single or three phase): 50-150. U5/T (single or three phase): 70-200. U7 (single phase): 100-300. U7T (three phase): 100-350. U9/T (single or three phase): 100-250. U18 (three phase only): 180-400. Y = Number of impellers. U3, U5 (single or three phase): 2-7 stages. U7 (single phase): 2-6 stages. U7 (three phase): 2-7 stages. U9 (single or three phase): 2-5 stages. U18 (three phase only): 2-4 stages. Suffix T = 3 phase.

Product Images

Approval Holder:

Exa Pumps SrL

Company Name

Exa Pumps SrL

Address

Via Tre Confini, 23 22010 Gera Lario CO

Country

Italy

Phone

0039 0344 910054

General Email

infor@exapumps.com

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002725

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Felsom, Exa Pumps Srl, model and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.

Product Images

Approval Holder:

Exa Pumps SrL

Company Name

Exa Pumps SrL

Address

Via Tre Confini, 23 22010 Gera Lario CO

Country

Italy

Phone

0039 0344 910054

General Email

infor@exapumps.com

View All Listings by this Company

Range of electric water pumps, with stainless steel bodies, shaft and either stainless steel or plastic impellors. Maximum working pressure 8.5 Bar. Maximum operating temperature: See models.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251202716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F)

Marking:

Ultra models = Pentax logo, model and technical data on data plate on body Plus models = Foras logo, model and technical data on data plate on body

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

U 3A-90/4; U 3A-100/5 - 35 °C U 5A-120/4; U 5A-150/5 - 35 °C U 3A-90/4 T; U 3A-100/5 T - 35 °C U 5A-120/4 T; U 5A-150/5 T - 35 °C P 3A-90/4; P 3A-100/5 - 35 °C P 5A-120/4; P 5A-150/5 - 35 °C P 3A-90/4 T; P 3A-100/5 T - 35 °C P 5A-120/4 T; P 5A-150/5 T - 35 °C U 3SA-90/4; U 3SA-100/5 - 80 °C U 5SA-120/4; U 5SA-150/5 - 80 °C U 3SA-90/4 T; U 3SA-100/5 T - 80 °C U 5SA-120/4 T; U 5SA-150/5 T - 80 °C P 3SA-90/4; P 3SA-100/5 - 80 °C P 5SA-120/4; P 5SA-150/5 - 80 °C P 3SA-90/4 T; P 3SA-100/5 T - 80 °C P 5SA-120/4 T; P 5SA-150/5 T - 80 °C

Approval Holder:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Range of self-priming electric booster pumps with plastic bodies incorporating plastic impellers with variable speed settings, and a non-return return valve (not suitable for backflow protection). Maximum working pressure 4.5 Bar Maximum operating temperature 50.0°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251202719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Available in both ¾” BSP (M) or ¾” NPT (M)

Marking:

DAB company logo on pump body

Installation Requirements:

R001 R008 R415

Expiry date:

31/12/2030

Model:

60220687 EsyBox Pop (Pressurisation booster system) 60217710 ESYDOCK POP (Base for an easy assembling of the pump Esybox Pop on the wall, provided with BSP and NPT threaded connections.)

Approval Holder:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company