Range of cold-water inlet control groups with DZR brass bodies consisting of an in-line, adjustable pressure reducing valve (PRV) (adjustable in the range of 0.8 bar - 6.0 bar, but factory pre-set at 3.0 or 3.5 bar - see model), strainer and a DZR brass bodied pressure relief valve (SRV) (set at 4.75 bar or 6.0 bar - see model). Products also incorporate an approved single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum supply pressure 16.0 bar. Maximum operating temperature 80°C.

Section:

2345 Valves

Section Subtitle:

Special combination assemblies.

WRAS Approval Number:

2106036

Size:

22mm compression

Marking:

RBM on cap. CR, size and flow arrow on body.

Installation Requirements:

R001 R120

Expiry date:

30/06/2026

Model:

UVGS21822200.1 - 22mm INLET 3 BAR PRV, 4.75 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UVGS21822210.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UGVS21822211 - 22mm INLET 3.5 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UVGS21822220.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 22mm EXPANSION VESSEL CONNECTION. UVGS21822260.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET NO VESSEL CONNECTION.

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Manufacturer:

RBM S.p.a.

Company Name

RBM S.p.a.

Address

Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)

Country

Italy

General Email

View All Listings by this Company

Range of commercial washing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with three ¾” x ¾” BSP (F) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet prior to a HDPE inlet hose with ¾” x ¾” captive nut end connections. Maximum working pressure 5.7 Bar. Maximum operating temperature 60°C.

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2106021

Note:

This appliance incorporates a Fluid Category 5 backflow prevention device. The double check valve assemblies supplied with this product must be installed on all available inlets to maintain the validity of the WRAS approval. No detergents, softeners or other products are to be placed within the dispenser compartment that represent a risk greater than Fluid Category 3.

Size:

¾” BSP (F) (to double check valve assembly)

Marking:

Alliance Laundry logo, model, serial number, product info on label on back panel. Alliance laundry logo, model, serial number on label inside of door.

Installation Requirements:

R001 R160 R574

Expiry date:

30/06/2026

Model:

UCEXXX, SCEXXX, HCEXXX, ICEXXX & PCEXXX XXX denotes the drum capacity and can be replaced with the following digits representing lb’s: 020, 030, 040, 060, 080 & 100.

Approval Holder:

Alliance Laundry CE s.r.o

Company Name

Alliance Laundry CE s.r.o

Address

Místecká 1116, 742 58 Príbor

Country

Czech Republic

Phone

+420 556 768 885

View All Listings by this Company

Range of commercial dishwashers with flow controlled by a solenoid valve and discharged via a type AB air gap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2107011

Size:

¾” BSP (F)

Marking:

Colged on front panel. Colged, Eurotec, model, serial number, date of manufacture (DD/MM/YYYY) and other product info on label on side panel.

Installation Requirements:

R001 R574

Expiry date:

31/07/2026

Model:

TopTech 34-23TD (rack 40x40), TopTech 35-23TD (rack 45x45), TopTech 36-23TD (rack 50x50), TopTech 36L-23TD (rack 50x60), TopTech 38-23TD (rack 50x50 hood type), TopTech 39-23TD (rack 50x60 hood type).

Product Images

Approval Holder:

Eurotec Srl div Colged

Company Name

Eurotec Srl div Colged

Address

Via Provinciale Romana 6-55010 Badia Pozzeveri Italy

View All Listings by this Company

Manufacturer:

Eurotec Srl div Colged

Company Name

Eurotec Srl div Colged

Address

Via Provinciale Romana 6-55010 Badia Pozzeveri Italy

View All Listings by this Company

Range of magnetic and electrolytic water conditioners with nickel plated copper bodies. Maximum working pressure 10 bar. MagnaScale2 model has a maximum operating temperature of 85°C. ElectroScale 2 models are for cold water use only.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Size:

see model

Marking:

Adey Logo, model and batch number on adhesive label on body.

Installation Requirements:

R001 R120 R170

Expiry date:

31/07/2026

Model:

MagnaScale 2 (product code SR1-03-05230) – 15mm compression ElectroScale 2 (product code SR1-03-05607) - 1” BSPP (M). ElectroScale 2 (product code SR1-03-05214) – 15mm compression. Model added September 2021: ElectroScale 2 (product code SR1-03-05233): 22mm compression

Product Images

Approval Holder:

Adey Innovation LLP

Company Name

Adey Innovation LLP

Address

Gloucester Road Cheltenham

Postcode

GL51 8NR

View All Listings by this Company

'TEPCON® M90 NAT CF2001 & TEPCON® M270 NAT CF2001'. Natural (appears white in colour), injection moulded acetal materials. For use with hot and cold water up to 85°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2106529

Expiry date:

30/06/2026

Approval Holder:

Polyplastics Taiwan Co. Ltd.

Company Name

Polyplastics Taiwan Co. Ltd.

Address

Plant No. 13, Jianye Road, Chao Liao Village, Daliao District, Kaohsiung City, Taiwan

Country

China

View All Listings by this Company